Reobrix 55012

Contents

Reobrix 55012 The Clock Tower Building Blocks Instruction Manual

Model: 55012

Brand: Reobrix

Introduction

Welcome to the instruction manual for your Reobrix 55012 The Clock Tower building block set. This highly detailed model allows you to construct a replica of the iconic UK Big Ben Clock Tower, featuring an automatic clock mechanism and intricate architectural elements. With 13825 pieces, this set offers an engaging and rewarding building experience for enthusiasts aged 14 and above.

Reobrix 55012 The Clock Tower product box
The Reobrix 55012 The Clock Tower building block set, as packaged.

Safety Information

  • Warning: This product contains small parts and is not suitable for children under 3 years due to choking hazards. Recommended age is 14+ years.
  • Do not eat the building blocks.
  • Keep packaging materials away from children to prevent suffocation.
  • California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Setup and Assembly

Your Reobrix 55012 set comes with all necessary building blocks and detailed paper instruction books. Please follow these steps for assembly:

  1. Unpacking: Carefully open the package. The blocks are typically provided in sealed bags and bubble wrap, as there is no original box.
  2. Organize Parts: Before starting, it is recommended to sort the 13825 pieces by color, shape, or size to facilitate the building process.
  3. Consult Instructions: Refer to the included paper instruction books. The set typically includes 3 detailed books to guide you through the complex build.
  4. Follow Step-by-Step: Assemble the model by following the step-by-step diagrams in the instruction books. Pay close attention to the placement of each block.
  5. Automatic Clock Assembly: During the assembly of the clock tower section, you will integrate the automatic clock mechanism. This mechanism requires 1x AA battery (not included).
Automatic Clock mechanism and battery installation diagram
Diagram showing the automatic clock mechanism and battery insertion (1x AA battery required).

Ensure all connections are firm to maintain the structural integrity of the model. The design is engineered to be compact and not loose once assembled.

Operating the Automatic Clock

The Reobrix 55012 model features a functional automatic clock. To operate it:

  1. Battery Installation: Locate the battery compartment within the clock tower section. Insert one (1) AA battery, ensuring correct polarity (+/-). The battery is not included with the set.
  2. Setting the Time: Once the battery is installed, the clock should begin to operate. Adjust the time using the designated mechanism, typically a small knob or dial on the clock module itself.
  3. Silent Ticking Mechanism: The clock is designed with a silent ticking mechanism for quiet operation.
Close-up of the automatic clock mechanism and battery compartment
Detailed view of the automatic clock and its battery compartment, requiring one AA battery.

Maintenance

  • Cleaning: To clean the model, gently wipe with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials, which could damage the plastic or painted parts.
  • Dusting: Regular dusting will help maintain the appearance of your model. A soft brush or compressed air can be used for intricate areas.
  • Storage: Store the model in a stable, dry environment away from direct sunlight and extreme temperatures to prevent discoloration or warping of the plastic.
  • Battery Replacement: If the automatic clock stops functioning, replace the AA battery. Remove the old battery and insert a new one, observing polarity.

Troubleshooting

ProblemPossible CauseSolution
Missing parts during assemblyManufacturing error or oversight.Contact customer support for free missing part replacement service.
Automatic clock not workingBattery is dead or incorrectly installed.Check battery polarity and replace with a fresh AA battery.
Model sections feel looseBlocks not fully pressed together during assembly.Carefully re-examine the connections and press blocks firmly into place.

Specifications

FeatureDetail
Model Number55012
Product NameThe Clock Tower (UK Big Ben)
BrandReobrix
MaterialEnvironment-friendly Plastic
Number of Pieces13825 pcs
Recommended Age14+ years, 18+ years
Assembled Dimensions (approx.)53.5 cm (Width) x 41.5 cm (Depth) x 139 cm (Height)
Clock MechanismAutomatic, requires 1x AA battery (not included)
Instruction ManualPaper book (3 books included)
Special FeaturesSilent ticking mechanism, functional timepiece, exquisite stickers, approximately 1400 spray-painted parts.
Dimensions diagram of the assembled Reobrix Clock Tower model
Approximate dimensions of the assembled Reobrix 55012 Clock Tower model.

User Tips

  • Many users praise the high quality of the blocks and the detailed, clear printed instructions, making the complex build manageable.
  • The packaging is often noted as being incredibly well-done, ensuring parts arrive safely.
  • In the rare event of missing parts, the manufacturer offers a free replacement service.

Warranty and Support

For any issues regarding missing parts, product defects, or general inquiries, please contact the seller or manufacturer directly. The manufacturer provides a free missing part replacement service to ensure a complete building experience.

Please retain your purchase receipt as proof of purchase for any warranty claims or support requests.

© 2024 Reobrix. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.