Hcalory HC1-U5

Contents

Hcalory HC1-U5 5KW Diesel Air Heater Instruction Manual

Model: HC1-U5

1. Introduction

Thank you for choosing the Hcalory HC1-U5 Diesel Air Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your heater. Please read it thoroughly before use and keep it for future reference.

Hcalory HC1-U5 Diesel Air Heater with components
Figure 1: Hcalory HC1-U5 Diesel Air Heater and included components.

2. Specifications

FeatureDetail
Brand NameHcalory
Model NameHC1-U5
Input Voltage12V / 24V DC
Start-up Power Consumption9-13A
Working Power Consumption2-4A
Power5KW (Adjustable range 5-8KW)
Shell ColourBlack & Red, Black
Fuel Consumption0.12 L/h - 0.46 L/h
Fuel Tank Capacity10L
Remote Control Distance50-100m
Working Ambient Temperature-40℃ to 40℃
Package Dimensions (L×W×H)48x44x27 cm / 18.9 × 17.3 × 10.6 in
FunctionParking heating, engine preheating
Item TypeHeating & Fans
MaterialPlastic and Metal
Item Length38cm
Item Width13.5cm
Item Height13.5cm
Item Diameter7.5cm
Item Weight8kg
External Testing CertificationCE
CertificationCE, RoHS, FCC
Special FeaturesSupport App Control
Switch TypeLCD Switch
FuelDiesel

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your Hcalory diesel air heater. Refer to the video tutorial and notes below for guidance.

3.1 Installation Video Tutorial

Video 1: Hcalory BlazeCore Unit 1S Diesel Heater Installation Tutorial. This video demonstrates the step-by-step assembly and connection of the heater components.

3.2 Step-by-Step Installation Guide

  1. Mounting Plate: Secure the mounting plate to the bottom of the heater unit.
  2. Remote Control Connection: Connect the remote control cable to the main unit.
  3. Circuit Installation: Connect the power cables. Ensure the red wire is connected to the positive (+) terminal and the black wire to the ground (GND) terminal of your power source.
  4. Warm Air Inlet: Attach the warm air inlet hose to the heater using a clamp.
  5. Intake Manifold: Install the intake manifold hose to the heater, securing it with a clamp.
  6. Muffler: Connect the muffler to the exhaust pipe.
  7. Exhaust Pipe: Attach the assembled exhaust pipe and muffler to the heater, securing it with a clamp.
  8. Warm Air Outlet: Attach the warm air outlet hose to the heater using a clamp.
  9. Warm Air Vent Pipe: Install the warm air vent pipe to the warm air outlet, securing it with a clamp.
  10. Fuel Line: Cut the fuel line to the required length. Connect one end to the oil pump and the other to the fuel filter.
  11. Oil Pump: Connect the fuel lines to the oil pump and secure them with clamps. Ensure the oil pump is correctly oriented.

3.3 Installation Location Recommendations & Notes

Diagrams showing recommended installation locations for diesel heaters in trucks, caravans, 5/7-seater vehicles, and excavators, along with important safety notes.
Figure 2: Recommended installation locations for various vehicle types and important safety notes.

Recommended Locations:

  • Truck: On the Co-driver's Legroom, On the Back Wall of the Cab, Driver's Seat Backrest, Within the Tool Box.
  • Caravan: Passenger Room, Under the Container, In the Trunk.
  • 5/7 Seater: Passenger Room, Under the Container, In the Trunk.
  • Excavator: Inside the Driver's Seat, On the Back Wall of the Cab, Inside the Protection Box.

Important Installation Notes:

  • The waste vent can reach temperatures up to 400°C. Keep away from children, pets, and flammable materials.
  • Place the exhaust port outside to prevent exhaust from seeping in.
  • The machine should be installed horizontally with the exhaust pipe installed horizontally or downward.

4. Operation

The Hcalory HC1-U5 offers versatile control options and intelligent features for optimal heating.

4.1 Control Methods

Image showing three control types: Smart APP Control, Remote Control, and LCD Panel Control for the diesel heater.
Figure 3: Three types of control for the Hcalory diesel heater.
  • Smart APP Control: Control your heater via a smartphone app (Bluetooth connection, up to 10m range).
  • Remote Control: Use the included remote control for convenient operation (up to 30m range).
  • LCD Panel Control: Directly operate the heater using the integrated LCD control panel.

4.2 Smart APP Features

Smart APP control features including temperature setting, multiple timing groups, gear setting, altitude mode, auto start-stop, and blowing mode.
Figure 4: Smart APP control features.

The smart app provides advanced control functionalities:

  • Temperature Setting: Adjust the desired temperature.
  • Multiple Timing Groups: Schedule heating periods.
  • Gear Setting: Control the fan speed/heating intensity.
  • Altitude Mode: Switch between 2500m and 5000m modes for optimized air-fuel ratio at different altitudes.
  • Auto Start-Stop: Enable automatic operation based on temperature settings.
  • Blowing Mode: Operate the fan without heating.

4.3 High-Efficiency Heating

Diagram illustrating high-efficiency combustion with 18% higher combustion efficiency compared to other heaters, showing faster temperature rise and lower fuel consumption.
Figure 5: High-efficiency combustion for faster heating and lower fuel consumption.

The heater features an optimized aluminum body and advanced algorithms, resulting in 18% higher combustion efficiency and reduced fuel consumption. It can heat areas of 20-25m² (215-269 sq.ft.) effectively.

Image showing the heating area of 215 FT² to 269 FT² for the diesel heater.
Figure 6: Effective heating area of 215 FT² to 269 FT².

5. Safety Features

The Hcalory HC1-U5 is designed with multiple protection mechanisms to ensure safe operation.

Multi-layer protection features including short circuit, reverse connection, overvoltage, and overheating protection.
Figure 7: Multi-layer protection for safe use.
  • Short Circuit Protection: Prevents damage from electrical shorts.
  • Reverse Connection Protection: Protects against incorrect power polarity.
  • Overvoltage Protection: Safeguards the unit from excessive voltage.
  • Overheating Protection: Automatically shuts down the unit if it exceeds safe operating temperatures.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your heater.

  • Clean Air Filter: Periodically check and clean the air filter to ensure proper airflow and prevent dust buildup.
  • Inspect Fuel Lines: Regularly inspect fuel lines for any signs of wear, leaks, or blockages.
  • Check Electrical Connections: Ensure all electrical connections are secure and free from corrosion.
  • Exhaust System: Verify that the exhaust pipe and muffler are clear of obstructions and securely fastened.
  • General Cleaning: Keep the exterior of the heater clean and free from debris.

7. Troubleshooting

If you encounter issues with your heater, refer to the following common troubleshooting steps:

  • Heater not starting: Check power connections, fuel supply, and ensure the remote/LCD panel is functioning correctly. Verify that the fuel pump is operating.
  • Low heat output: Inspect air inlets and outlets for blockages. Ensure the fuel filter is clean and the fuel quality is appropriate. Check for proper altitude mode setting.
  • Unusual noise: Check for loose components, obstructions in the fan, or issues with the exhaust system.
  • Error codes on LCD: Consult the specific error code meanings in the full user manual (if available) or contact customer support.
  • Automatic shutdown: The heater has overheating protection. Ensure proper ventilation and clear any obstructions around the unit. Check for correct temperature settings and auto start-stop configurations in the app.

8. User Tips

  • Optimal Power Usage: While the heater is rated for 5KW, its power output can range from 5-8KW depending on the model and settings. Adjust the power setting via the LCD panel or app for optimal heating and fuel efficiency.
  • Automatic Operation: Utilize the Smart APP's "Auto Start-Stop" and thermostat control features to maintain a consistent temperature and conserve fuel. The heater can automatically turn on/off based on your set temperature.
  • Altitude Adjustment: If operating at high altitudes, remember to switch to the appropriate 2500m or 5000m altitude mode via the app or control panel to ensure efficient combustion and prevent carbon buildup.
  • Fuel Quality: Always use high-quality diesel fuel to prevent clogging and ensure efficient operation.

9. Warranty and Support

For any product quality issues or technical assistance, please contact customer service. The manufacturer is committed to providing effective support.

  • Certified Original: This product is a 100% original Hcalory product.
  • Contact Support: If there is a problem with product quality, contact customer service in time. They will help solve the problem at the first time and provide the most effective service.

© 2023 Hcalory. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.