Avhrit 2-in-1 Mini Chainsaw and Electric Pole Pruner User Manual

1. Introduction

Thank you for choosing the Avhrit 2-in-1 Mini Chainsaw and Electric Pole Pruner. This versatile tool is designed for efficient and safe pruning, featuring an 8-inch cutting bar and a telescopic pole that extends your reach up to 16 feet. With its powerful brushless motor, automatic lubrication system, and cordless design, it offers convenience and performance for various gardening and wood-cutting tasks.

2. Safety Instructions

Always prioritize safety when operating power tools. Read and understand all instructions before use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

General Safety

• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, hearing protection, and sturdy footwear.
• Keep children and bystanders away while operating the tool.
• Do not operate the tool in wet conditions or in the presence of flammable liquids or gases.
• Ensure a clear working area, free from obstacles and tripping hazards.
• The tool is equipped with a safety feature that automatically shuts off if it hits something or is off balance, enhancing user safety.

Battery Safety

• Use only the charger provided by Avhrit for charging the batteries.
• Do not expose batteries to water, heat, or direct sunlight.
• Store batteries in a cool, dry place away from metal objects.
• Do not short-circuit the battery terminals.

Operational Safety

• Maintain a firm grip on the tool with both hands during operation.
• Be aware of kickback and take precautions to avoid it.
• Never overreach or stand on unstable surfaces when using the pole pruner.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged. If any parts are missing or damaged, please contact customer service.

• 1 x Avhrit Mini Chainsaw Head (8-inch)
• 1 x Telescopic Pole Attachment
• 2 x 21V 4.0Ah Rechargeable Batteries
• 1 x Battery Charger
• 1 x Saw Chain
• 1 x Guide Bar
• 1 x Oil Bottle (for lubrication)
• 1 x Blade Cover
• 1 x User Manual

4. Setup

4.1 Assembly

The Avhrit 2-in-1 tool can be used as a handheld mini chainsaw or a pole pruner. Assembly is designed to be simple and stable.

1. Attaching the Guide Bar and Chain: Carefully install the guide bar and chain onto the chainsaw head. Ensure the chain is oriented correctly and seated properly in the guide bar groove.
2. Converting to Mini Chainsaw: Attach the chainsaw head directly to the main handle unit.
3. Converting to Pole Pruner: Attach the chainsaw head to the telescopic pole attachment, then connect the pole to the main handle unit. Ensure all connections are secure.

4.2 Battery Installation & Charging

1. Charging: Insert the battery into the charger and plug the charger into a power outlet. The indicator light will show charging status. Charge both 21V 4.0Ah batteries fully before first use.
2. Installation: Slide a charged battery into the battery slot on the tool until it clicks into place. To remove, press the release button and slide the battery out.

4.3 Chain Adjustment

The Avhrit chainsaw features a tool-free chain adjustment system for convenience.

1. Loosen the cover knob on the side of the chainsaw head.
2. Turn the chain tension knob to adjust the chain tension. The chain should be snug but still able to be pulled freely around the guide bar by hand.
3. Once tension is correct, tighten the cover knob securely.

4.4 Lubrication System

The tool is equipped with an automatic lubrication system to ensure smooth operation and extend chain life.

1. Locate the oil reservoir cap on the chainsaw head.
2. Fill the reservoir with appropriate chainsaw bar and chain oil using the provided oil bottle. Do not overfill.
3. During operation, press the lubrication button 3-4 times periodically to ensure the chain is adequately oiled.

5. Operating Instructions

5.1 Mini Chainsaw Mode

This mode is ideal for cutting small logs, branches, and general wood-cutting tasks.

1. Ensure the battery is fully charged and installed, and the chain is properly tensioned and lubricated.
2. Hold the chainsaw firmly with both hands, maintaining a balanced stance.
3. Press the safety lock button, then squeeze the trigger to start the chainsaw. Release the trigger to stop.
4. The cutting head can rotate 0-120° for flexible cutting angles. Adjust as needed by loosening the rotation lock, setting the desired angle, and re-tightening.
5. Allow the chain to reach full speed before making contact with the wood. Cut with a smooth, steady motion.

5.2 Pole Pruner Mode

Use this mode for pruning high branches without the need for a ladder.

1. Ensure the chainsaw head is securely attached to the telescopic pole and the pole is connected to the handle unit.
2. Extending the Pole: Unlock the pole sections and extend them to the desired length, up to 16 feet. Securely lock each section before use.
3. Adjusting Cutting Head Angle: The cutting head can be adjusted from 0-120° to reach branches at different angles. Loosen the angle adjustment, set the desired angle, and tighten it firmly.
4. Maintain a stable footing and keep a safe distance from the cutting area. Avoid cutting directly overhead.
5. Start the tool as described for the mini chainsaw mode. Allow the chain to reach full speed before making contact with the branch.

5.3 Versatile Applications

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Avhrit tool.

• Cleaning: After each use, remove the battery and clean the tool thoroughly. Use a brush to remove sawdust and debris from the chain, guide bar, and motor housing.
• Chain & Guide Bar: Regularly check the chain for sharpness and tension. Sharpen or replace the chain as needed. Clean the guide bar groove to ensure proper chain movement.
• Lubrication: Always ensure the automatic lubrication system is filled with appropriate bar and chain oil.
• Battery Care: Store batteries in a cool, dry place. Do not store fully discharged batteries for extended periods.
• Storage: When not in use, always attach the blade cover to the chainsaw to prevent accidental injury and protect the chain. Store the tool in a dry, secure location out of reach of children.

7. Troubleshooting

If you encounter issues with your Avhrit tool, refer to the following common problems and solutions:

8. Specifications

9. User Tips

• Simple Assembly: Users have noted that the assembly process is straightforward and quick, often taking less than 5 minutes.
• Safety First: The tool's automatic shut-off feature, which activates if it hits something or becomes unbalanced, is a valuable safety mechanism. Always rely on this and other safety guidelines.
• Blade Protection: Always use the provided blade cover when the chainsaw is not in use or during storage to protect the blade and prevent accidental contact.
• Check Contents: Although assembly is simple, it's a good practice to perform a quick inventory of all parts upon delivery, as packaging can sometimes be compromised during transit.

10. Warranty & Support

Avhrit is committed to providing high-quality products and excellent customer service. If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer support team. We are dedicated to ensuring your satisfaction.