1. Introduction
The Asia-Teco TF886-03 and T886-03 are advanced dual-frequency access control systems designed for secure and convenient entry management. These devices support multiple unlocking methods including fingerprint, RFID card (125KHz and 13.56MHz), password, and NFC unlocking via mobile phones. With an IP67 waterproof rating and durable zinc alloy construction, they are suitable for both indoor and outdoor environments. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and security.
2. Safety Information
- Ensure all wiring is performed by a qualified technician to prevent electrical hazards.
- Disconnect power before performing any installation or maintenance.
- Do not expose the device to extreme temperatures or corrosive substances beyond its specified operating range.
- Keep the device away from strong electromagnetic interference.
- Use only recommended power supplies (DC12V) to avoid damage.
3. Package Contents
Upon opening the package, verify that all items are present and in good condition:
- Access Control Device (TF886-03 or T886-03 model)
- Product Manual
- Mounting Screws and Anchors
4. Product Overview
The TF886-03 and T886-03 access control systems offer robust security features and user-friendly operation. Key features include:
- Dual Frequency Support: Compatible with both 125KHz and 13.56MHz RFID cards.
- Multiple Unlocking Methods: Fingerprint (TF886-03 only), RFID card, password, and NFC mobile phone unlocking.
- IP67 Waterproof: Suitable for outdoor installation, fully sealed with adhesive on the back.
- Wiegand Input/Output: Supports Wiegand 26 (default) for integration with other access control systems.
- Management Card Function: Easily add and delete user cards using a dedicated admin card.
- Virtual Password: Enhance security by entering random numbers before and after the actual password.
- User Data Interconnection: Copy user card and password data to new machines for easy setup.
- Backlight Button: Keypad is visible in low-light conditions, with adjustable backlight settings.
- Doorbell Function: Can be connected to an external wired doorbell.
- Normally Open/Normally Closed Relay: Adaptable to various scenarios.
5. Specifications
| Feature | Specification |
|---|---|
| Working Voltage | DC12V |
| Standby Current | ≤30mA |
| Recognition Speed | ≤0.3S |
| Opening Time | 1~99 seconds (adjustable) |
| Unlocking Method | Password/Card/Fingerprint |
| Environmental Temperature | -40°C ~ 60°C |
| Card Type | ID+IC dual frequency card swiping |
| Card Capacity | 2300 |
| Fingerprint Capacity (TF886-03) | 100/200/500/880 (optional) |
| Public Password | 1 set |
| Administrator Password | 1 group |
| Reading Distance | 2~5cm |
| Environmental Humidity | 10%~90% |
| Dimensions | 86mm x 86mm x 13mm |
| Security Mode | Fail Secure |
6. Setup & Installation
Careful wiring is crucial for the proper functioning of your access control system. Refer to the diagrams below for standard and dedicated power supply connections, as well as interlock scenarios.
6.1 Wiring Diagram for Ordinary Power Supply
6.2 Wiring Diagram for Access Control Dedicated Power Supply
6.3 Interlocking Scenario Wiring Diagram
6.4 Product Wiring Color Codes
| Wire Color | Function |
|---|---|
| Purple | BELL1, BELL2 (Doorbell) |
| Brown | WG1 (Wiegand Output) |
| Pink | WG0 (Wiegand Output) |
| Gray | ALARM |
| Orange | D_IN (Door Contact) |
| Blue | PUSH (Exit Button) |
| Red | +12V (Power Positive) |
| Black | GND (Power Negative) |
| Green | NO (Normally Open) |
| White | COM (Common) |
| Yellow | NC (Normally Closed) |
7. Operating Instructions
7.1 Card Registration (T886 & TF886)
- Enter programming mode: Press
*then your Administrator Password (default is usually123456) then#. The indicator light will change. - Select card registration: Press
1then#. - Present the RFID card to the device. The device will beep to confirm registration.
- To register more cards, repeat step 3.
- Exit programming mode: Press
*.
7.2 Fingerprint Registration (TF886-03 only)
- Enter programming mode: Press
*then your Administrator Password (default is usually123456) then#. The indicator light will change. - Select fingerprint registration: Press
2then#. - Place your finger on the fingerprint sensor. Lift and place again several times until the device confirms registration.
- To register more fingerprints, repeat step 3.
- Exit programming mode: Press
*.
7.3 Unlocking Methods
- RFID Card: Simply swipe a registered ID or IC card over the card reader area.
- Password: Enter your registered password followed by
#. For enhanced security, utilize the virtual password feature by entering random numbers before and after your actual password (e.g.,XXXX + Password + YYYY + #, where XXXX and YYYY are random numbers). - Fingerprint (TF886-03 only): Place a registered finger on the fingerprint sensor.
- Mobile NFC: Use a compatible mobile phone with NFC functionality to unlock the door (requires prior setup and registration).
7.4 Management Card Function
The management card allows for easy addition and deletion of user cards without entering programming mode. Simply present the management card to the device to activate its functions.
7.5 User Data Interconnection
This feature allows you to copy user card and password data from one device to another, simplifying the setup process for multiple access points.
8. User Tips
- Secure Installation: Always ensure the device is securely mounted and all wiring connections are tight and insulated to prevent tampering or environmental damage.
- Virtual Password Usage: Make it a habit to use the virtual password feature. This adds an extra layer of security by making it harder for onlookers to guess your actual code.
- Fingerprint Maintenance: For the TF886-03 model, periodically wipe the fingerprint sensor with a soft, dry cloth to ensure accurate and quick recognition.
- NFC Compatibility: If using NFC unlocking, ensure your mobile device's NFC is enabled and properly configured with the access control system.
- Regular Testing: Periodically test all registered cards, fingerprints, and passwords to ensure they are still functioning correctly.
9. Troubleshooting
- Device not powering on: Check the DC12V power supply connection and ensure it is providing adequate power. Verify wiring according to the diagrams in Section 6.
- Card not recognized: Ensure the card is a registered ID or IC dual-frequency card. Try swiping the card closer to the reader. If multiple cards fail, re-register a known working card or check the card capacity.
- Password not working: Double-check the entered password. Ensure you are pressing
#after the password. If using the virtual password feature, ensure the last 4 digits are correct. - Fingerprint not recognized (TF886-03): Ensure your finger is clean and dry. Place your finger flat on the sensor, covering the entire area. If issues persist, re-register your fingerprint.
- Door not unlocking: Check the connection to the electric lock. Verify the opening time setting (1-99 seconds). Ensure the correct unlocking method is being used.
- Backlight not working: Check the backlight settings in the device's programming menu.
10. Maintenance
- Cleaning: Wipe the device surface and fingerprint sensor (TF886-03) with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance and security.
- Data Backup: If the system supports data export, regularly back up user data to prevent loss in case of device malfunction or replacement.
- Environmental Check: Periodically inspect the device for any signs of wear, damage, or water ingress, especially if installed outdoors.
11. Warranty & Support
Asia-Teco provides a standard warranty for this product against defects in materials and workmanship. For detailed warranty terms, technical support, or service inquiries, please refer to the official Asia-Teco website or contact your local distributor. Please have your product model number (TF886-03 or T886-03) and purchase information ready when seeking support.
