ANDELI MIG-135

Contents

ANDELI 135A MIG Welding Machine User Manual

Model: MIG-135

1. Product Overview

The ANDELI MIG-135 is a versatile 4-in-1 welding machine designed for various welding tasks. It supports MIG, Lift TIG, and Stick (MMA) welding processes, making it suitable for both household and professional use. Featuring IGBT inverter technology, it ensures stable output current and reliable performance. The machine is compact, portable, and equipped with a large LED display for clear parameter visibility and easy operation.

ANDELI MIG-135 Welder with accessories

Figure 1: ANDELI MIG-135 Welding Machine and included accessories.

Video 1: Product demonstration showcasing welding processes, internal components, display, wire loading, and torch connection.

2. Safety Information

Always prioritize safety when operating welding equipment. Read and understand all safety warnings and instructions before use. Failure to do so may result in electric shock, fire, serious injury, or death.

  • Wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing.
  • Ensure proper ventilation to avoid inhaling welding fumes.
  • Keep flammable materials away from the welding area.
  • Do not operate the machine in wet conditions.
  • Ensure the machine is properly grounded.
  • Disconnect power before performing any maintenance or adjustments.

3. Setup

3.1 Component Identification

Control panel showing 4-in-1 welding modes

Figure 2: Front panel with controls and display for various welding modes.

3.2 Basic Connections

Connect the welding cables according to the desired welding process:

Diagram showing basic connections for MMA, Lift TIG, and MIG welding

Figure 3: Basic connection diagrams for MMA, Lift TIG, and MIG welding.

  • MMA (Stick) Welding: Connect the electrode holder to the positive (+) terminal and the ground clamp to the negative (-) terminal.
  • Lift TIG Welding: Connect the TIG torch (not included) to the negative (-) terminal and the ground clamp to the positive (+) terminal.
  • MIG Welding: Connect the MIG torch to the designated MIG connector and the ground clamp to the appropriate terminal (polarity may vary depending on gas/gasless wire).

3.3 Loading Welding Wire (MIG)

The machine is suitable for 2-pound flux-cored welding wire. Follow these steps to load the wire:

  1. Open the wire feed compartment.
  2. Place the 1KG wire roll onto the spool holder.
  3. Thread the welding wire through the drive rolls.
  4. Ensure the drive rolls are correctly set for the wire size (0.8mm/1.0mm drive rolls are available; flip the wheel to change).
  5. Close the compartment and secure the wire.
Illustration of loading a 2lb welding wire spool

Figure 4: Illustration of loading a 2lb welding wire spool.

4. Operating Instructions

4.1 Power On and Mode Selection

Turn on the welding machine. Use the control panel to select your desired welding mode:

  • SYN MIG Welding: For synergistic MIG welding. When the current is adjusted, the machine automatically matches the corresponding sheet thickness.
  • MAN MIG Welding: For manual MIG welding, allowing independent adjustment of current and voltage.
  • MMA Welding: For Stick welding with electrodes (Ø1.6/2.0/2.5mm electrodes are suitable for long working times).
  • Lift TIG Welding: For TIG welding (TIG torch not included). Suitable for welding thicknesses of 2-5mm, friendly to novice users.
Close-up of the large LED display showing welding parameters

Figure 5: Large LED display for real-time data and visual parameters.

4.2 Adjusting Parameters

  • Use the control knobs to adjust current (A) and voltage (V) as needed for your welding task.
  • For thin sheet welding (e.g., 0.5mm or 0.8mm), press the synergy button.
  • Long press the synergy button to switch into MANUAL mode for current and voltage adjustment.

4.3 Material Suitability

The ANDELI MIG-135 is capable of welding multiple metal materials, including:

  • Square Pipe
  • Metal Cage
  • Galvanized Sheet
  • Mild Steel
  • Cast Iron
  • Stainless Steel
Image showing various metal materials suitable for welding

Figure 6: Examples of metal materials suitable for welding with this machine.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to clear ventilation openings.
  • Torch Maintenance: The split welding torch design allows for convenient after-sales maintenance. Regularly inspect the torch for wear and tear, especially the contact tip and nozzle. Replace worn parts as necessary.
  • Cable Inspection: Periodically check all welding cables for damage, cuts, or loose connections.
  • Storage: Store the machine in a dry, clean environment when not in use.

6. Troubleshooting

This section provides general troubleshooting tips. For complex issues, please contact customer support.

  • No Power: Ensure the power cable is securely connected and the power switch is on. Check the circuit breaker.
  • Poor Arc Start/Stability: Verify proper grounding. Check electrode/wire condition and settings. Ensure correct gas flow (if applicable).
  • Wire Feeding Issues: Check for tangled wire, correct drive roll tension, and proper wire size for the drive rolls. Inspect the torch liner for blockages.
  • Overheating: Allow the machine to cool down. Ensure ventilation openings are clear. Reduce duty cycle if continuously welding at high currents.

7. Specifications

FeatureSpecification
Brand NameANDELI
Model NumberMIG-135
Dimensions295*155*200mm
Weight4KG (Machine only)
Package Weight6.95KG
Package Dimensions (L*W*H)40cm * 32cm * 27cm
CertificationCE
UseWelding
Frequency50/60Hz
Is Smart DeviceNo
High-concerned chemicalNone
OriginMainland China
Dimensions and weight of the welding machine

Figure 7: Physical dimensions and weight of the ANDELI MIG-135.

8. Warranty and Support

This product is covered by a free returns policy within 90 days. For specific warranty details and technical support, please refer to the seller's official channels or contact them directly. Your personal details are protected, and secure payments are guaranteed.

9. User Tips

  • Power Plug Compatibility: Please verify the power plug type to ensure compatibility with your local electrical outlets. Some regions may require an adapter for the standard plug provided.

© 2024 ANDELI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.