AOVOPRO ES80 Electric Scooter User Manual

1. Introduction and Safety Warnings

Thank you for choosing the AOVOPRO ES80 Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read it thoroughly before your first ride.

1.1 General Safety Disclaimer

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

Always prioritize your safety and the safety of others. Familiarize yourself with local laws and regulations regarding electric scooter usage.

2. Technical Specifications

The AOVOPRO ES80 is designed for adults, offering a balance of speed, range, and portability.

2.1 Product Dimensions

3. Assembly and Initial Setup

The AOVOPRO ES80 is designed for quick and easy setup. It comes largely pre-assembled.

3.1 Unfolding the Scooter

1. Carefully remove the scooter from its packaging.
2. Locate the folding mechanism near the base of the handlebar stem.
3. Release the latch and lift the handlebar stem until it locks securely into the upright position.
4. Ensure all locking mechanisms are engaged before use.

3.2 Initial Charge

Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port and plug it into a power outlet. The charging indicator will show the charging status. A full charge typically takes 5-8 hours.

3.3 App Connection (AOVOPRO APP)

The AOVOPRO ES80 supports smart app control for enhanced functionality.

1. Download the AOVOPRO APP from your smartphone's app store.
2. Ensure your scooter is powered on and Bluetooth is enabled on your phone.
3. Open the app and follow the on-screen instructions to connect to your scooter via Bluetooth.
4. Once connected, you can access various settings and features.

4. Operating Instructions

4.1 Controls Overview

4.2 Starting and Riding

1. Power On: Press the power button on the handlebar to turn on the scooter.
2. Kick Start: Place one foot on the deck and push off with the other foot to gain some initial momentum (approx. 3-5 km/h).
3. Accelerate: Gently press the accelerator lever with your thumb. The scooter will begin to move.
4. Braking: Release the accelerator and gently squeeze the brake lever to slow down or stop. The scooter features a dual braking system (front electric brake + rear disc brake) for effective stopping.
5. Speed Modes: Use the app or handlebar controls to switch between different speed modes (if available) to suit your riding environment.
6. Cruise Control: Activate cruise control via the app for consistent speed on long, flat rides.

4.3 App Functions

The AOVOPRO APP allows you to:

• Monitor current speed, battery level, and mileage.
• Lock/Unlock the vehicle.
• Control the light switch.
• Select different speed modes.
• View detailed vehicle information.
• Adjust speed settings.
• Activate/deactivate cruise control.
• Perform fault detection and receive solutions.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your AOVOPRO ES80 scooter.

5.1 General Care

• Keep the scooter clean. Wipe it down with a damp cloth after use.
• Avoid exposing the scooter to extreme temperatures or direct sunlight for prolonged periods.
• Store the scooter in a dry, cool place.

5.2 Battery Care

• Charge the battery regularly, even if not in use, to maintain its health.
• Avoid completely draining the battery before recharging.
• Do not charge the scooter unattended, especially overnight.
• The battery features overcharge protection.

5.3 Tires

The AOVOPRO ES80 is equipped with 8.5-inch anti-skid solid tires. These tires are designed to be maintenance-free, puncture-resistant, and do not require inflation. They offer good cushioning for a comfortable ride.

5.4 Waterproofing

The scooter has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand splashes, avoid submerging the scooter in water or riding in heavy rain to prevent damage to electronic components.

6. Troubleshooting

If you encounter issues with your AOVOPRO ES80, refer to the following common problems and solutions.

6.1 Common Issues

• Scooter not turning on: Check battery charge. Ensure all connections are secure.
• Motor not engaging: Ensure the scooter has been kick-started to the minimum speed. Check app settings for any speed limits.
• Reduced range/speed: This can be affected by rider weight, terrain, temperature, and wind speed. Ensure the battery is fully charged.
• App connectivity issues: Ensure Bluetooth is enabled on your phone and the scooter is powered on. Try restarting both the app and the scooter.

6.2 Using the App for Fault Detection

The AOVOPRO APP includes a fault detection feature that can help diagnose issues.

1. Connect your scooter to the AOVOPRO APP.
2. Navigate to the 'Fault Detection' section within the app.
3. Follow the app's instructions to run a diagnostic check.
4. The app will confirm the status and may provide solutions for identified faults.

7. User Tips

• Always wear a helmet and appropriate safety gear when riding.
• Start in a low-speed mode until you are comfortable with the scooter's handling.
• Maintain a safe distance from pedestrians and other vehicles.
• Be aware of your surroundings and potential hazards on the road.
• For optimal battery life, avoid frequent full discharges and charges.
• Utilize the cruise control feature on long, flat stretches to conserve battery and reduce rider fatigue.

8. Warranty and Support

AOVOPRO provides a 2-year limited warranty for different parts of the ES80 electric scooter. For any warranty claims or technical support, please contact AOVOPRO customer service.

AOVOPRO offers efficient after-sale service with 7*24 hours customer support, based in local repair warehouses in Europe, aiming to provide thoughtful and rapid assistance.