Dooya DM35S-6/28

Contents

Dooya Silent Fast Rolling Tubular Motor DM35S 6/28 Instruction Manual

Model: DM35S-6/28

Brand: Dooya

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya Silent Fast Rolling Tubular Motor, model DM35S 6/28. This motor is designed for motorized roller blinds and features silent, fast rolling operation with mechanical limit adjustment. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Safety Information

This product has undergone EU conformity assessment and complies with the following directives:

  • Low Voltage Directive 2014/35/EU (LVD)
  • Electromagnetic Compatibility Directive 2014/30/EU (EMC)
  • Restriction of Hazardous Substances Directive 2011/65/EU (RoHS)
  • General Product Safety Regulation (GPSR)

This product meets the requirements of electrical safety, electromagnetic compatibility, and environmental compliance. The EU Declaration of Conformity (DoC) is issued and technical documentation is kept by the EU Authorized Representative for inspection.

Environmental Note

This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.

Warning: This device operates at high voltage (Above 50Vac or 75Vdc). Installation should be performed by qualified personnel only to prevent electrical shock or injury.

3. Package Contents

The standard package for the DM35S 6/28 motor includes the following items:

  • 1 x Dooya DM35S 6/28 Tubular Motor
  • 1 x Crown
  • 1 x Drive Adapter
  • 1 x Adjust Rod

Note: Remote controllers and mounting brackets are sold separately and are not included in the standard package.

Dooya DM35S-6/28 motor with packaging and accessories
Figure 1: Package contents including motor, crown, drive adapter, and adjust rod.

4. Specifications

AttributeValue
Model NumberDM35S-6/28
Voltage220-240V
Wattage121W
Torque6Nm
Rolling Speed28r/min
Rotating Speed28r/min
Current0.53A
Protection LevelIP44
Low Noise MotorYes
Mechanical StrokeSupport
RF433 ModuleNot included
CompatibilityWorks with Dooya DC227/DC228, for 40mm octagonal tube, 45mm double grooved tube, 50mm grooved tube, 50mm round tube.
CertificationCE
OriginMainland China
Max Load24kg (with Silent Brushless Motor Herringbone Technology)
Dooya DM35S-6/28 Tubular Motor with 4-wire connection and specifications
Figure 2: Dooya DM35S-6/28 Motor with key specifications visible on the label.

5. Setup and Installation

5.1 Tube Compatibility and Adapter Selection

The DM35S 6/28 motor is compatible with various tube types. The correct crown and drive adapter must be selected based on your specific tube's outer diameter and inner structure. Compatible tube sizes include 40mm Octagonal, 40mm Round, 45mm Groove, 47mm Groove, and 50mm Groove/Round tubes.

Important Considerations for Adapters:

  • For rolling tubes with the same outer diameter, inner structures can vary significantly across regions. The provided crown and drive adapter are standard for A-OK products.
  • You may need to modify the provided crown and drive adapter or source compatible adapters locally if your tube's internal structure differs.
  • If your old crown and drive adapter are in good condition and compatible, reusing them is often the best option.
  • Some users successfully create custom adapters using 3D printing.
Various tube types indicating compatibility with the motor
Figure 3: Illustration of compatible tube types (40mm Octagonal, 40mm Tube, 45mm Tube, 47mm Grooved, 50mm Round, 50mm Grooved).

5.2 Crown and Drive Adapter Examples

Below are visual examples of the crown and drive adapters for common tube types:

Crown and Drive Adapter for 40mm Round Tube
Figure 4: Crown and Drive Adapter for 40mm Round Tube.
Crown and Drive Adapter for 40mm Octagonal Tube
Figure 5: Crown and Drive Adapter for 40mm Octagonal Tube.
Crown and Drive Adapter for 45mm Groove Tube
Figure 6: Crown and Drive Adapter for 45mm Groove Tube.
Crown and Drive Adapter for 47mm Groove Tube
Figure 7: Crown and Drive Adapter for 47mm Groove Tube.
Crown and Drive Adapter for 50mm Groove Tube
Figure 8: Crown and Drive Adapter for 50mm Groove Tube.
Drive Adapter for 50mm Round Tube (no crown needed)
Figure 9: Drive Adapter for 50mm Round Tube (Crown not required).

5.3 Motor Installation Diagram

The motor integrates into a roller blind system as shown in the diagram below. Ensure all components are securely fastened according to the diagram.

Diagram showing solution for motorized roller blinds with tubular motor, drive adapter, wall bracket, idler bracket, driving tube, fabric, and bottom beam.
Figure 10: Solution for Motorized Roller Blinds. Components include Tubular Motor, Drive Adapter (DL01), Wall Bracket (DZ319B), Idler Bracket (DZ318B), Driving Tube (DG02), Fabric, and Bottom Beam.

5.4 Wiring and Limit Position Adjustment

The motor features a 4-wire connection. Refer to the detailed internal structure and wiring diagram for proper connection. The motor also includes mechanical limit adjustment for setting the upper and lower travel positions of your blinds.

Detailed diagram of motor components including mechanic limit, built-in receiver, dot-move & light-adjust functions, outline, dimension drawing, inner structure, and motor type explanation.
Figure 11: Motor Internal Structure and Features. Shows outline, dimension drawing, inner structure, and explanation of motor type (DM35R-3/28) with mechanic limit, built-in receiver, dot-move, and light-adjust functions.
Close-up of the drive head with 'Set Down Limit Position' and 'Set Up Limit Position' indicated.
Figure 12: Drive Head with Set Up and Set Down Limit Adjustment Positions.

For detailed wiring instructions and precise limit setting procedures, please consult the full user manual PDF available for download:

PDF Manual Reference: Dooya Tubular Motor User Manual (PDF)

6. Operation

The DM35S 6/28 motor supports remote control operation and features electronic trip memory for precise positioning. Once installed and limits are set, the motor can be controlled via a compatible Dooya remote controller (e.g., DC227/DC228, sold separately).

  • Remote Control: Use a compatible remote to raise, lower, and stop the blinds.
  • Electronic Trip Memory: The motor retains its set upper and lower limit positions, ensuring consistent operation.
  • Dot-move & Light-adjust functions: (If applicable to your specific remote/system) These functions allow for fine adjustments and light control.
Dooya DM35S-6/28 motor with remote control and electronic trip memory icons
Figure 13: Motor features including Remote Control and Electronic Trip Memory.

6.1 Applications

This motor is suitable for various applications, including:

  • Blackout Blinds
  • Bedroom Blinds
  • Meeting Room Blinds
  • Hotel Blinds
  • Living Room Blinds
  • Zebra Blinds
Images showing various applications for the tubular motor in different settings like bedrooms, meeting rooms, and hotels.
Figure 14: Examples of motor applications in different environments.

7. Maintenance

The Dooya DM35S 6/28 tubular motor is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance:

  • Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the motor, wiring, and mounting brackets for any signs of wear, damage, or loose connections.
  • Lubrication: The motor is factory-lubricated and generally does not require additional lubrication. If unusual noises occur, consult a qualified technician.
  • Environmental Conditions: Ensure the motor operates within its specified temperature and humidity ranges. The motor has an IP44 protection level, meaning it is protected against solid objects larger than 1mm and splashing water from any direction.

Caution: Do not attempt to open or repair the motor yourself. This may void the warranty and pose electrical hazards.

8. Troubleshooting

If you encounter issues with your Dooya DM35S 6/28 motor, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Motor does not respond to remote control.
  • No power supply.
  • Remote control battery is dead.
  • Remote control not paired or out of range.
  • Motor overload protection activated.
  • Check power connection to the motor.
  • Replace remote control batteries.
  • Re-pair the remote control with the motor (refer to remote manual). Ensure remote is within operating range.
  • Allow motor to cool down if it has been running continuously.
Blinds do not stop at desired upper/lower limits.
  • Limit settings are incorrect.
  • Re-adjust the mechanical limit positions using the adjust rod (refer to Section 5.4 and the PDF manual).
Unusual noise during operation.
  • Obstruction in the blind mechanism.
  • Motor or tube mounting issues.
  • Inspect the blinds for any obstructions.
  • Check that the motor and tube are securely mounted and aligned.

If the problem persists after attempting these steps, please contact customer support or a qualified technician.

9. User Tips

  • When selecting the crown and drive adapter, carefully compare your existing tube's internal profile with the provided images to ensure a snug fit. Slight modifications might be necessary for a perfect match.
  • Always ensure the power supply is disconnected before performing any installation or maintenance work on the motor to prevent electrical hazards.
  • For optimal performance and longevity, avoid continuously running the motor for extended periods without rest.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly.

Manufacturer: Lumi United Technology Co., Ltd.

Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China

Tel: 86-18589043609

EU Authorized Representative: Sophie Bennett

Address: 9 rue du Bat d'Argent, 69001 Lyon, France

Tel: 33-774555006

Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.