1. Introduction
Thank you for choosing the ANDELI MIG-270 Semi-automatic Welding Machine. This versatile 3-in-1 inverter welder supports MIG (Gas/Gasless), Lift TIG, and Stick (MMA) welding processes, making it suitable for a wide range of household and light industrial applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your welding machine.
2. Safety Information
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ensure adequate ventilation to avoid inhaling welding fumes.
- Protect bystanders from arc rays and hot metal.
- Never touch live electrical parts.
- Ensure the welding machine is properly grounded.
- Keep a fire extinguisher nearby.
- Read and understand all safety warnings and instructions before operating the machine.
3. Package Contents
Upon unpacking, please verify that all items are present and undamaged. If any items are missing or damaged, contact your seller immediately.

- ANDELI MIG-270 Welding Machine
- MIG Welding Torch (Split Welding Gun)
- Ground Clamp
- Electrode Holder (for Stick/MMA welding)
- TIG Torch (for Lift TIG welding)
- Consumables (e.g., contact tips, nozzles, collets, electrodes)
- User Manual (this document)
4. Product Overview
The ANDELI MIG-270 is a compact and powerful welding machine designed for ease of use and versatility.


4.1 Dimensions and Weight

- Dimensions: 455mm (Length) x 180mm (Width) x 300mm (Height)
- Weight: 7.1 KG
5. Setup Instructions
5.1 Power Connection
The MIG-270 features dual voltage capability, supporting both 110V and 220V input. Ensure the correct power plug is used for your region and that the power source can handle the machine's requirements.

5.2 Wire Installation (MIG/Flux MIG)
The machine is compatible with 1KG and 5KG wire spools, supporting 0.8mm and 1.0mm welding wire.


- Open the side panel of the machine.
- Place the wire spool onto the spindle, ensuring it rotates freely.
- Feed the welding wire through the wire guide and into the drive rollers.
- Close the drive roller tension arm and adjust the tension appropriately for the wire diameter.
- Thread the wire into the MIG torch liner until it exits the contact tip.
5.3 Torch and Electrode Holder Connection
The MIG-270 features a split welding gun design for easy installation and maintenance.


Refer to the schematic diagram below for proper connection of all welding accessories based on the desired welding mode.

- MIG Welding (with Gas): Connect the MIG torch to the front panel connector. Connect the ground clamp to the negative (-) terminal. Connect the gas hose to the gas inlet.
- Flux MIG Welding (without Gas): Connect the MIG torch to the front panel connector. Connect the ground clamp to the negative (-) terminal. No gas connection is needed.
- MMA Welding (Stick): Connect the electrode holder to the positive (+) terminal. Connect the ground clamp to the negative (-) terminal.
- TIG Welding (Lift TIG): Connect the TIG torch to the negative (-) terminal. Connect the ground clamp to the positive (+) terminal. Connect the gas hose to the TIG torch (if using gas shielded TIG).
6. Operating Instructions
6.1 Control Panel and Mode Selection
The MIG-270 features a digital display and intuitive controls for selecting welding modes and adjusting parameters.
Video 1: Product demonstration showing welding modes, control panel features, and internal components.
- Power On/Off: Use the main power switch located on the rear of the machine.
- Mode Selection: Use the 'MULTIFUNCTIONAL' button or corresponding selector on the front panel to cycle through welding modes: Flux MIG, Syn MIG, Man MIG, Stick/TIG (MMA/Lift TIG).
- Synergy Adjustment: In synergistic MIG modes (Syn MIG), the machine automatically adjusts current and voltage based on the selected plate thickness. Rotate the main knob to adjust the plate thickness, and the current/voltage will change accordingly.
- Manual Adjustment (Man MIG): In manual MIG mode, the current and voltage can be controlled independently using the dedicated knobs.
6.2 Welding Applications
The MIG-270 is suitable for welding various materials, including carbon steel, square tube, galvanized plate, and angle steel.

7. Maintenance
Regular maintenance ensures the longevity and safe operation of your welding machine.
- Cleaning: Periodically clean the machine's exterior and internal components (if accessible and safe) to remove dust and debris. Use compressed air for internal cleaning, ensuring the machine is unplugged.
- Check Connections: Regularly inspect all cables, connections, and torch components for wear, damage, or loose fittings. Replace any worn parts immediately.
- Wire Feed System: Keep the wire feed rollers clean and free of debris. Ensure proper tension for smooth wire feeding.
- Consumables: Replace contact tips, nozzles, and electrodes as they wear out to maintain weld quality.
- Storage: Store the machine in a dry, clean environment when not in use.
8. Troubleshooting
If you encounter issues with your MIG-270, refer to the following common problems and solutions:
- No Power: Check the power cable connection, wall outlet, and the machine's power switch. Ensure the circuit breaker has not tripped.
- Poor Arc Start/Unstable Arc: Verify proper grounding. Check for correct wire feed speed and voltage settings for the material and wire type. Ensure consumables (contact tip, nozzle, electrode) are clean and correctly installed.
- Wire Feeding Issues: Check wire spool installation and tension. Ensure the wire is not tangled or kinked. Inspect the drive rollers for debris and proper alignment.
- Overheating: The machine has built-in thermal protection. If it overheats, it will shut down. Allow it to cool down, ensure proper ventilation, and check for blocked air vents.
For persistent issues, contact customer support.
9. Specifications
Below are the technical parameters for the ANDELI MIG-270 welding machine.

| Item | Model: MIG-270 (220V) |
|---|---|
| Input Power | Single Phase 220V ±15% 50Hz |
| Rated Input Power (KW) | 7.2 |
| Rated Output Voltage (V) | 26.4 |
| Output Current Range (A) | 40-200 |
| No-Load Voltage (V) | 55 |
| Rated Duty Cycle (%) | 30 |
| Power Factor | 0.73 |
| Insulation Class | F |
| Protect Class | IP21S |
| Cooling Mode | Fan Cooling |
| Efficiency (%) | 80 |
| Weight (KG) | 7.1 |
| Dimension (MM) | 455*180*300 |
10. User Tips
- Verify Package Contents: Before starting, always double-check that all expected accessories (torch, ground clamp, electrode holder, etc.) are included in your package to avoid delays during setup.
- Practice on Scrap Material: If you are new to welding or a specific welding process, practice on scrap pieces of the same material and thickness you plan to weld. This helps in dialing in the correct settings and improving technique.
- Proper Ventilation is Key: Always ensure your welding area is well-ventilated to disperse fumes. Consider using a fume extractor for indoor work.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the ANDELI customer service department. Keep your purchase receipt and product serial number handy for faster assistance.