1. Introduction
Thank you for choosing the SoBuy FST53-HGX2 Set of 2 Bar Stools. These industrial-style bar stools are designed for comfort and durability, featuring a metal frame and engineered wood (MDF + PVC) seat and backrest. This manual provides essential information for the safe assembly, use, and maintenance of your new bar stools.
2. Package Contents
Please check the package to ensure all components are present and undamaged before beginning assembly. The package should contain:
- 2 x SoBuy FST53-HGX2 Bar Stools (disassembled components)
- Assembly hardware (screws, bolts, washers, Allen key)
- Instruction leaflet (if included, otherwise refer to this manual)
3. Specifications
| Feature | Detail |
|---|---|
| Model | FST53-HGX2 |
| Quantity | Set of 2 Stools |
| Overall Dimensions (D x W x H) | 40 cm x 38 cm x 95 cm |
| Seat Height | 67 cm |
| Seat Width | 38 cm |
| Backrest Height | 29 cm (from seat) |
| Frame Material | Metal |
| Seat & Backrest Material | Engineered Wood (MDF + PVC) |
| Color | Buff (as shown in figure) |
| Maximum Weight Capacity | 100 kg per stool |
| Item Weight | Approx. 6 kg per stool (12 kg for the set) |
| Style | Industrial |
| Installation Method | Self-contained assembly |
4. Setup and Assembly
The SoBuy FST53-HGX2 bar stools are designed for easy assembly. It is recommended to assemble the stools on a soft, clean surface to prevent scratches. You may need additional tools such as a screwdriver or wrench, though an Allen key is typically included.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components and hardware are present according to the parts list (usually found in the included instruction leaflet).
- Assemble the Frame: Begin by connecting the main vertical metal legs. Attach the horizontal crossbars and footrests to the legs using the provided screws and bolts. Ensure all connections are finger-tight at this stage.
- Attach Seat and Backrest: Once the frame is stable, position the engineered wood seat onto the top of the frame. Secure it with screws. Then, attach the backrest to the designated points on the frame.
- Tighten All Fasteners: Once all parts are in place, systematically tighten all screws and bolts using the provided Allen key or appropriate tools. Do not overtighten, but ensure all connections are secure.
- Final Check: Gently shake the assembled stool to ensure stability. If any wobbling occurs, re-check all connections and tighten as necessary.
5. Operating Instructions
These bar stools are designed for general use in kitchens, dining areas, or commercial settings. Ensure the stool is placed on a flat, stable surface before use. Always sit centrally on the seat and avoid standing on the stool to prevent accidents. Do not exceed the maximum weight capacity of 100 kg per stool.
6. Maintenance and Care
Proper care will extend the life and appearance of your bar stools.
- Cleaning: Wipe the metal frame and engineered wood surfaces with a damp cloth. For stubborn stains, a mild soap solution can be used, followed by wiping with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
- Placement: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect the material integrity.
7. Troubleshooting
Most issues with bar stools are related to assembly or general wear.
- Wobbling Stool: If the stool wobbles after assembly, ensure all screws and bolts are evenly tightened. Loosen all fasteners slightly, sit on the stool to settle the legs, then re-tighten them firmly.
- Loose Parts: If any parts become loose over time, re-tighten the corresponding fasteners. Regular inspection can prevent this.
- Scratches/Dents: Minor scratches on the metal frame can sometimes be touched up with appropriate metal paint. Dents on the engineered wood are generally permanent.
8. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for bar stools include:
- Always ensure the stool is fully assembled and stable before use.
- Place felt pads on the bottom of the stool legs if using on delicate flooring to prevent scratches.
- For optimal comfort, ensure the stool height is appropriate for your bar or counter.
9. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms may vary by region and retailer.
