1. Introduction
The JIKONG JK-B4A24S is an intelligent active balancer designed for advanced battery management systems (BMS). This device is compatible with a wide range of battery chemistries, including Li-ion, LiFePO4, and LTO, supporting battery packs from 4S to 24S configurations. Its primary function is to perform real-time, active energy transfer equalization, ensuring optimal cell voltage balance across the battery pack. This process significantly extends battery lifespan, enhances performance stability, and improves overall reliability.
Key features include a customizable balancing current from 0.1A to 4A, Bluetooth communication with a dedicated mobile application for real-time monitoring, and comprehensive protection functions such as overcharge, over-discharge, overcurrent, and short circuit protection. The balancer also incorporates equilibrium line resistance detection to preemptively identify abnormal contact failures.

2. Safety Information
Please read and understand all safety instructions before installing or operating the JIKONG BMS Active Balancer. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Always disconnect the battery pack from any power source before performing installation or maintenance.
- Ensure all connections are secure and correctly polarized to prevent short circuits.
- Wear appropriate personal protective equipment (PPE), including safety glasses and insulated gloves, when working with batteries.
- Do not attempt to open or modify the balancer unit. There are no user-serviceable parts inside.
- Keep the balancer away from water, moisture, and flammable materials.
- Ensure adequate ventilation around the battery pack and balancer during operation.
- If any abnormal behavior (e.g., excessive heat, smoke, unusual odors) is observed, immediately disconnect the battery and seek professional assistance.
3. Setup and Installation
Proper installation is crucial for the safe and effective operation of your JIKONG BMS Active Balancer. Follow these steps carefully:
3.1 Component Identification

- Metal Shell: Provides protection for internal components.
- High Quality Capacitor: Essential for stable operation.
- High Performance MCU (Microcontroller Unit): The brain of the balancer.
- PCBA (Printed Circuit Board Assembly): Contains all electronic circuits.
- LED: Status indicator.
- Balance Cable Connector: For connecting to battery cells.
3.2 Wiring Instructions
The balancer connects directly to your battery cells via the balance cable. Ensure all cables are connected correctly according to the diagram for your specific model (JK-B4A24S).
- Connecting all the cables: Carefully connect the balance wires from your battery pack to the Balance Cable Connector on the BMS. Ensure each cell's positive and negative terminals are connected to the corresponding pins on the balancer.
- Insert the cable into the BMS: Once all individual cell wires are connected to the balance cable harness, plug the harness securely into the designated port on the balancer.

Note: The wiring diagram shows specific connections for different models. For the JK-B4A24S, pay close attention to the P1 and P2 connections for the active equalizer to the battery cells.
4. Operating Instructions
The JIKONG BMS Active Balancer is designed for intelligent interaction and easy operation, primarily through its mobile application.
4.1 Mobile Application (JIKONG BMS APP)
The "JIKONG BMS" mobile application serves as your personal lithium battery steward, providing real-time data and control over your battery pack. The app supports iOS, Android, and HarmonyOS systems and automatically switches to your mobile phone's language.
- Download and Install: Search for "JIKONG BMS" in your device's app store and install it.
- Connect via Bluetooth: Enable Bluetooth on your mobile device and open the JIKONG BMS app. The app will automatically detect and connect to your balancer.
- Real-time Monitoring: Once connected, you can view various battery parameters in real-time, including:
- Voltage: Overall battery pack voltage and individual cell voltages.
- Current: Charging and discharging current.
- Temperature: Battery temperature.
- SOC (State of Charge): Remaining battery capacity.
- Alarm: Notifications for any detected issues.
- Cycles: Number of charge/discharge cycles.
- Cells Wire Resistance: Monitor resistance for each cell connection.
- Parameter Adjustment: The app allows you to freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance settings. Always refer to the internal parameters of the protection board before making changes.

4.2 Balancing Function
The balancer features an active balanced current that can be set independently in the range of 0.1A to 4A, regardless of the cell voltage difference. This intelligent adjustment is suitable for low voltage battery charging and ensures efficient cell equalization.
- Automatic Active Balance: The system automatically initiates balancing when cell voltage differences are detected.
- 24-hour Real-Time Active Balance: Continuous monitoring and balancing ensure optimal battery health.

5. Maintenance
To ensure the longevity and optimal performance of your JIKONG BMS Active Balancer, follow these maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
- Cleanliness: Keep the balancer unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquids or abrasive cleaners.
- Equilibrium Line Resistance Detection: The balancer features equilibrium line resistance detection. Monitor this parameter via the mobile app. If abnormal contact failure is detected, inspect the wiring for loose or damaged connections.
- Firmware Updates: Check the JIKONG official website or app for any available firmware updates to ensure your balancer has the latest features and bug fixes.
6. Troubleshooting
This section provides solutions to common issues you might encounter with your JIKONG BMS Active Balancer.
| Problem | Possible Cause | Solution |
|---|---|---|
| Balancer not connecting to APP via Bluetooth. | Bluetooth is off on mobile device; balancer is not powered; app not installed correctly; interference. | Ensure Bluetooth is enabled. Check power to the balancer. Reinstall the app. Move closer to the balancer or reduce interference. |
| Battery cells are not balancing. | Incorrect wiring; balance current set too low; significant cell damage. | Verify all balance wires are correctly connected (refer to Figure 3). Check balance current settings in the app. Inspect battery cells for damage. |
| "Abnormal contact failure" detected. | Loose or corroded balance wire connection. | Inspect all balance wire connections to the battery cells and the balancer for secure contact and corrosion. Re-seat or clean connections as needed. |
| Low voltage shutdown. | Battery pack voltage has dropped below the configured low voltage threshold. | Recharge the battery pack. Check the low voltage shutdown settings in the app and adjust if necessary, ensuring it aligns with your battery's specifications. |
| Need to connect to PC for advanced functions. | Standard model does not include RS485 or CANBUS. | This model (JK-B4A24S) primarily uses Bluetooth APP. If PC connectivity via RS485 or CANBUS is required, a different balancer model with these functions must be purchased. |
7. Specifications
The following table details the technical specifications for the JIKONG JK-B4A24S Active Balancer:
| Feature | Specification |
|---|---|
| Model | JK-B4A24S |
| Brand Name | JIKONG |
| Type | LIFEPO4 Battery BMS (Active Balancer) |
| Cells Supported | 8S-24S (Applicable to 4-24S Li-ion/LiFePO4/LTO Batteries) |
| Single Cell Voltage Collection Range | 1V ~ 5V |
| Voltage Collection Accuracy | ± 3mV |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 0.1A ~ 4A (Independently set) |
| Charging Current | 10A |
| Handware or Smart | SMART BMS |
| Charge and Discharge Port | Common Port BMS |
| Functions | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, Equilibrium line resistance detection, Low voltage shutdown |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Bluetooth Function | Yes (Supports Android and iOS APP) |
| RS485 Function | No (Available on other models) |
| CANBUS Function | No (Available on other models) |
| NTC Temperature Detection | No (Available on other models) |
| Certification | CE, WEEE |
| Package Weight | 0.73 kg |
| Package Dimensions (L x W x H) | 20 cm x 15 cm x 5 cm |

8. User Tips
- Initial Setup: Double-check all wiring connections before powering on the balancer for the first time. Incorrect wiring is a common cause of issues.
- App Exploration: Spend some time exploring the JIKONG BMS mobile application. Understanding all the monitoring parameters and adjustable settings will help you optimize your battery system.
- Balancing Current: While the balancer offers a wide range for balancing current, start with a moderate setting and observe the balancing performance. Adjust as needed based on your battery pack's characteristics and desired balancing speed.
- Regular Monitoring: Periodically check the app for cell voltage differences and overall battery health. Early detection of imbalances can prevent long-term battery degradation.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the JIKONG Factory Store directly through the platform where the product was purchased. Ensure you have your purchase details and product model number (JK-B4A24S) available when contacting support.
JIKONG is committed to providing high-quality products and customer satisfaction. For more information about JIKONG Technology and their product range, please refer to their official channels.