1. Important Safety Warnings
⚠️ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
- Do not ride in wet conditions, heavy rain, or through puddles deeper than 2 cm.
- Avoid riding on uneven surfaces, steep slopes, or over obstacles.
- Ensure all screws and quick-release mechanisms are securely tightened before each ride.
- Do not allow children under the age of 16 to operate the scooter.
- Adhere to local traffic laws and regulations.
- Do not perform stunts or sudden maneuvers.
- Keep hands and feet away from moving parts.
- Do not carry passengers or heavy loads.
- Charge the scooter only with the provided charger in a well-ventilated area.
- Store the scooter in a dry, cool place, away from direct sunlight and extreme temperatures.
2. Package Contents
Carefully unpack your iScooter W6 and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.
- 1 x iScooter W6 Electric Scooter
- 1 x Charger (42V 1.5A)
- 1 x L-type Hexagonal Wrench
- 6 x Screws (including 2 spares)
- 1 x Inflatable Inner Tube
- 1 x Extension Tube
- 1 x User Manual (this document)
3. Product Overview
Familiarize yourself with the different parts of your iScooter W6.
- Display: Shows real-time speed, riding mode, battery level, and other indicators.
- Throttle: Controls acceleration.
- Headlight: Front LED light for visibility.
- Brake Lever: Activates the electronic front brake and rear disc brake.
- Folding Buckle & Knob: Mechanisms for folding and unfolding the scooter.
- Charging Port: For connecting the charger.
- Rear Fender: Protects from splashes and houses the taillight.
- Taillight & Brake Light: Rear light for visibility and braking indication.
- Disc Brake: Rear mechanical disc brake for effective stopping.
- Kickstand: For parking the scooter upright.
4. Setup and Initial Use
4.1 Unfolding the Scooter
To unfold your iScooter W6:
- Place the scooter on a flat surface.
- Release the folding buckle/latch located near the base of the stem.
- Carefully lift the stem until it locks into the upright position. Ensure the locking mechanism is fully engaged and secure.
- Tighten any visible screws or quick-release levers on the handlebar and stem if necessary, using the provided L-type hexagonal wrench.
4.2 Initial Charging
Before your first ride, fully charge the scooter's battery.
- Locate the charging port on the scooter (refer to Product Overview).
- Connect the charger to the charging port.
- Plug the charger into a standard wall outlet.
- The charging indicator on the charger will typically show red during charging and turn green when fully charged.
- Charging time is approximately 5-6 hours. Do not overcharge.
- Disconnect the charger once charging is complete.
4.3 Tire Inflation
The iScooter W6 uses 10-inch pneumatic tires. Ensure they are properly inflated before riding for optimal performance and safety. Use the provided extension tube if needed to access the valve.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the power button on the display for a few seconds until the screen illuminates.
- Power Off: Press and hold the power button for a few seconds until the display turns off.
5.2 Speed Modes
The iScooter W6 features three speed modes, which can be switched by short-pressing the power button after startup.
| Mode | Max Speed (Original) | Max Speed (After Cracking) |
|---|---|---|
| Walk Mode | 6 KM/H | N/A |
| ECO Mode | 15 KM/H | 15 KM/H |
| D Mode | 25 KM/H | 25 KM/H |
| S Mode | N/A | 35 KM/H |
To adjust/crack the speed limit: After turning on the device, hold the brake lever and press the power button 5 times to break the speed limit.
5.3 Braking
The iScooter W6 is equipped with a dual brake system for safety:
- Front Electronic Brake: Activated by the brake lever.
- Rear Disc Brake: Activated by the brake lever.
Apply the brake lever gently to slow down and firmly for emergency stops. Always brake smoothly to maintain control.
5.4 Folding and Carrying
The scooter features a quick folding design for easy portability and storage.
- Ensure the scooter is powered off.
- Locate the folding mechanism (buckle/knob) on the stem.
- Follow the instructions to release the stem and fold it down towards the deck until it locks into place.
- Once folded, the scooter can be easily carried or stored in compact spaces.
5.5 LCD Intelligent Riding Display
The LCD display provides essential riding information at a glance.
- Real-time Speed: Current riding speed.
- Speed Unit: KM/H or MPH.
- Riding Mode: Indicates current speed mode (Walk, ECO, D, S).
- Cruise Control: Indicator for cruise control activation.
- App Connected: Shows if the scooter is connected to the Voltix app.
- Headlight On: Indicator for headlight status.
- Motor Overheating: Warning indicator.
- Battery Level: Current battery charge status.
- Error Prompt: Displays error codes if any issues occur.
5.6 Smartphone App Connectivity (Voltix APP)
Enhance your control and convenience by connecting your iScooter W6 to the Voltix APP.
The app allows you to:
- View ride records.
- Manage cruise control settings.
- Monitor battery usage.
- Adjust acceleration settings.
- Utilize intelligent locking functions.
Refer to the Voltix APP's in-app instructions for pairing and detailed feature usage.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter.
6.1 Cleaning
- Wipe the scooter with a soft, damp cloth. Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents.
- Do not wash the scooter with a high-pressure water jet or immerse it in water.
- Ensure the charging port cover is securely closed to prevent water ingress.
6.2 Battery Care
- Charge the battery regularly, even if the scooter is not in use, to maintain battery health.
- Avoid completely draining the battery.
- Store the scooter with a partially charged battery (around 50-70%) if storing for extended periods.
- Do not expose the battery to extreme temperatures (hot or cold).
6.3 Tire Maintenance
- Regularly check tire pressure and inflate to the recommended PSI (usually indicated on the tire sidewall or in specifications).
- Inspect tires for wear, punctures, or damage before each ride.
- The 10-inch pneumatic tires are designed for durability and comfort, but proper inflation is crucial.
6.4 Brake Adjustment
- Periodically check the responsiveness of both the electronic and disc brakes.
- If the disc brake feels loose or less effective, it may require adjustment. Consult a professional or refer to specific disc brake maintenance guides.
6.5 General Inspection
- Before each ride, check all screws, bolts, and quick-release mechanisms to ensure they are tight.
- Inspect the folding mechanism for proper function.
- Ensure the headlight and taillight are working correctly.
7. Troubleshooting
This section addresses common issues you might encounter with your iScooter W6.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on. | Low battery; Power button not pressed correctly; Internal fault. | Charge the battery fully. Ensure the power button is pressed and held for a few seconds. If issue persists, contact support. |
| Reduced range or speed. | Low battery; Overload (exceeding max load); Low tire pressure; Riding uphill or against strong wind; Battery degradation. | Charge battery fully. Check rider weight. Inflate tires to correct pressure. Avoid extreme riding conditions. |
| Brakes feel weak. | Disc brake adjustment needed; Worn brake pads; Electronic brake malfunction. | Inspect disc brake for proper alignment and pad wear. Adjust disc brake cable tension if necessary. If electronic brake issue, contact support. |
| Display not working or showing error. | Loose connection; Software glitch; Component failure. | Try restarting the scooter. Check for any visible loose cables. Note down any error codes displayed and contact support. |
| Unusual noises during operation. | Loose components; Debris in wheels/motor; Worn bearings. | Inspect all parts for looseness and tighten. Check wheels and motor area for foreign objects. If noise persists, seek professional inspection. |
8. Specifications
Detailed technical specifications for the iScooter W6 Electric Scooter.
| Feature | Detail |
|---|---|
| Model | W6 |
| Motor Power | 500W (Front-wheel drive brushless motor) |
| Max Load | 120 kg |
| Max Speed | 35 km/h (after cracking speed limit) |
| Speed Modes | Walk (6km/h), ECO (15km/h), D (25km/h), S (35km/h) |
| Max Range | 25-30 km |
| Battery | 36V 7.8Ah |
| Brake System | Front electronic brake and rear disc brake (E-ABS anti-lock system) |
| Tires | 10-inch pneumatic tires (wear-resistant, anti-puncture layers) |
| Charging Time | 5-6 hours |
| Charger Output | 42V 1.5A |
| Max Climbing Angle | 15° |
| Display | LCD Intelligent Riding Display |
| Connectivity | Voltix APP Smart APP support |
| Unfolded Size (L x W x H) | 112 x 49 x 111 cm |
| Folded Size (L x W x H) | 112 x 49 x 47 cm |
| Product Weight | 15 kg |
9. User Tips
Based on general user experiences and common practices for electric scooters:
- Smooth Acceleration: For a comfortable ride and to conserve battery, apply the throttle gradually rather than abruptly.
- Anticipate Braking: Plan your stops in advance, especially at higher speeds, to use the brakes smoothly and effectively.
- Regular Tire Checks: Pneumatic tires perform best and are less prone to punctures when correctly inflated. Check pressure weekly.
- App Features: Explore the Voltix APP for additional features like ride tracking and custom settings to personalize your riding experience.
- Folding Practice: Practice folding and unfolding a few times to become familiar with the mechanism, making it quicker and easier for transport.
Note: No specific user reviews or Q&A were provided to generate product-specific tips. These are general recommendations.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official iScooter website or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
Disclaimer: The manufacturer and distributor are not responsible for any damage, injury, or loss caused by improper use, maintenance, or modification of the product. Users are responsible for understanding and complying with all local laws and regulations regarding electric scooter usage.