Dooya DM35R 6/28

Contents

Dooya DM35R 6/28 Tubular Motor Instruction Manual

For Motorized Roller Blinds with 433MHz Wireless Remote Control

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Dooya DM35R 6/28 35mm Tubular Motor. This motor is designed for motorized roller blinds and features a built-in 433MHz wireless receiver, allowing control via compatible Dooya remote controllers. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Dooya DM35R 6/28 Tubular Motor with remote control
Dooya DM35R 6/28 Tubular Motor with a compatible remote control.

2. Specifications

The Dooya DM35R 6/28 is a robust tubular motor designed for various roller blind applications. Key specifications are provided below:

FeatureDetail
Model NumberDM35R 6/28
Motor TypeAC Tubular Motor with built-in 433MHz receiver
Rated Torque6 N.m
Rated Speed28 rpm
Tube Diameter35 mm
Voltage220/230V AC
Frequency50/60 Hz
Power121 W
Current0.53 A
Running Time4 min
Protection DegreeIP44
Max Turns (L1/L2)39
Max Load24 kg
Compatible RemoteDooya 433MHz remote controllers (e.g., DC2700, DC2760, DC2702)
Wiring3-core wire (Zero, Live, Ground)
CertificationsCE, RoHS
Package Dimensions (L x W x H)66 cm x 10 cm x 8 cm
Package Weight1.8 kg

Note: The motor is available in different configurations (e.g., 'DM35R 6N only motor', 'with DC2700', 'with DC2760', 'with DC2702') and compatible with various tube types (40mm Octagonal, 40mm Round, 45mm Groove, 47mm Groove, 50mm Round, 50mm Groove, 55mm, 63mm, 83mm). Ensure you have the correct accessories for your specific installation.

Dooya DM35R Technical Data and Wiring Diagram
Technical data table for DM35R series motors and wiring diagrams for 230V/50Hz and 120V/60Hz.

3. Setup and Installation

Proper installation is crucial for the safe and effective operation of your motorized roller blinds. It is recommended that installation be performed by a qualified professional.

3.1 Components Overview

Motorized Roller Blind System Components
Diagram showing the typical components of a motorized roller blind system.

A complete motorized roller blind solution typically includes:

  • Tubular Motor (DM35R 6/28)
  • Drive Adapter (Crown and Drive)
  • Tail Plug
  • One Pair of Brackets
  • Driving Tube (e.g., 40mm Octagonal, 50mm Round)
  • Fabric (Roller Blind Material)
  • Bottom Beam
  • Remote Controller (sold separately)

3.2 Motor Dimensions and Features

Dooya DM35R Motor Dimensions and Features
Motor dimensions (35mm diameter, approx. 600mm length) and location of power cable and reset button.
Dooya DM35R Stroke Adjustment Ports
Close-up view of the motor showing the stroke adjustment ports.

3.3 Tube Compatibility

The 35mm tubular motor is compatible with various tube types. Ensure your roller blind tube matches one of the supported types:

Compatible Tube Types for Dooya DM35R Motor
Examples of compatible tube types: 38mm, 40mm, 45mm, 47mm Grooved, 50mm Round, 50mm Grooved, 55mm, 63mm, 83mm.

3.4 Electrical Wiring

The motor uses a 3-core wire for connection. Refer to the wiring diagram for correct connections based on your voltage:

  • For 230V/50Hz:
    • Blue wire: Neutral
    • Brown wire: Live
    • Green/Yellow wire: Earth
  • For 120V/60Hz:
    • White wire: Neutral
    • Black wire: Live
    • Green wire: Earth

WARNING: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected before wiring.

4. Operating Instructions

The DM35R 6/28 motor is controlled wirelessly via a 433MHz remote controller. Remote controllers are typically sold separately.

4.1 Remote Control Pairing

To pair your remote control with the motor:

  1. Ensure the motor is powered on.
  2. Locate the programming button on your remote control (refer to your remote's specific manual).
  3. Press and hold the programming button on the remote until the motor jogs slightly (moves up and down a small amount). This indicates successful pairing.
  4. Test the Up, Down, and Stop buttons on the remote to confirm control.
Remote Control for Dooya Motorized Blinds
The motor works with a 433RF remote controller (remote sold separately).

4.2 Setting Mechanical Limits

The DM35R 6/28 features mechanical limits to define the upper and lower stopping points of your roller blind. These are adjusted using the stroke adjustment ports on the motor head.

  1. Use a small adjustment tool (often provided with the motor) to turn the screws in the stroke adjustment ports.
  2. One port controls the upper limit, and the other controls the lower limit.
  3. Turn the screw clockwise to increase the travel distance and counter-clockwise to decrease it.
  4. Adjust incrementally and test the blind's movement until the desired upper and lower positions are achieved.

Note: Incorrect limit settings can damage the blind or motor. Adjust carefully.

4.3 Resetting the Motor

If you need to clear all programmed settings (e.g., remote pairings, limits), you can perform a factory reset using the reset button on the motor head. Consult the motor's specific programming guide for the exact reset procedure, as it may involve a sequence of button presses or power cycles.

5. Maintenance

The Dooya DM35R 6/28 tubular motor is designed for long-term, maintenance-free operation. However, following these general guidelines can help ensure its longevity:

  • Cleaning: Keep the motor and surrounding area free from dust and debris. Do not use harsh chemicals or abrasive cleaners.
  • Inspection: Periodically check the mounting brackets and tube for any signs of wear or loosening.
  • Power Supply: Ensure a stable power supply within the specified voltage and frequency range.
  • Avoid Overloading: Do not exceed the maximum load capacity of 24kg.

Do not attempt to open or repair the motor yourself. This will void the warranty and may cause electric shock or damage.

6. Troubleshooting

If you encounter issues with your DM35R 6/28 motor, try the following basic troubleshooting steps:

  • Motor Not Responding:
    • Check if the motor is receiving power.
    • Ensure the remote control batteries are not depleted.
    • Re-pair the remote control with the motor.
    • Verify that the remote control is within range and not obstructed.
  • Blind Stops at Incorrect Positions:
    • Re-adjust the mechanical limits using the stroke adjustment ports.
  • Motor Makes Unusual Noises:
    • Check for any obstructions in the blind mechanism or tube.
    • Ensure the motor is securely mounted.
  • Motor Overheats:
    • The motor has a running time limit (4 minutes). Allow it to cool down if used continuously for extended periods.
    • Ensure the blind is not overloaded.

If the problem persists after attempting these steps, contact your seller or a qualified technician for assistance.

7. User Tips

  • Tube Compatibility: Always double-check that your roller blind tube diameter and shape (e.g., octagonal, round, grooved) are compatible with the motor's drive adapter before installation.
  • Remote Control Options: Dooya offers various 433MHz remote controllers (e.g., DC2700AC, DC2760AC, DC2702) with different features. Choose one that best suits your needs.
  • Professional Installation: For optimal performance and safety, especially with electrical connections and precise limit settings, consider professional installation.
Dooya Remote Controller Models
Examples of Dooya 433MHz remote controllers: DC2700AC, DC2760AC, DC2702.

8. Warranty and Support

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims.

For technical support or further assistance, please contact the Dooya customer service or your product retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.