1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new OBD2+GPS Multi-function Head-Up Display (HUD) Gadget. This device offers a dual system (OBD and GPS) to provide comprehensive vehicle data directly in your line of sight, enhancing driving safety and convenience. Please read this manual thoroughly before using the product.
The head-up display is suitable for gasoline vehicles with an OBD2 interface. The GPS function can be displayed at the same time in the OBD mode.
Video: Product overview and demonstration of features and installation methods.
2. Setup and Installation
2.1 Package Contents
- 1 x Head-Up Display (HUD) Unit
- 1 x OBD2 Cable
- 1 x Fixing Strap (Hook And Loop)
- 1 x English Manual
2.2 Compatibility Check
The dual-system head-up display is primarily suitable for gasoline vehicles. For OBD mode functionality, your vehicle must meet the following criteria:
- Gasoline vehicles with OBD2 agreement produced in the United States after 2004.
- Gasoline vehicles with OBD2 agreement produced in other regions after 2008.
Important: Some cars may still not be compatible. Please contact customer support with your car's model and year to confirm compatibility before purchasing or installation.
To determine if your car is OBD2 compatible, you can:
- Open the hood and find the sticker under the hood. Look for an "OBDII CERTIFIED" label (as shown in Figure 1).
- Check for an automobile diagnosis port under the steering wheel (as shown in Figure 2).
Image: Visual guide for checking OBD2 certification and diagnostic port.
2.3 Installation Methods
There are two primary installation methods for the HUD unit:
- A-pillar Trim Installation: The HUD can be securely tied onto the A-pillar trim. This is a unique feature of this model.
- Dashboard Installation: The HUD can be placed flat on the dashboard.
Image: Examples of HUD installation on A-pillar trim and dashboard.
2.4 Connecting the Device
Connect the provided OBD2 cable to your vehicle's OBD2 diagnostic port and to the HUD unit. Ensure a secure connection.
3. Operating Instructions
3.1 Power On/Off
The HUD unit will typically power on automatically when the vehicle is started and power off when the vehicle is turned off. There is also a power on/off button on the side of the unit.
3.2 Button Functions
The device features several buttons for navigation and settings:
- M button: Used to short press and switch between display interfaces.
- OK button: Used to confirm selections.
- Left button: Used to navigate left or decrease values.
- Right button: Used to navigate right or increase values.
Image: Detailed view of the HUD unit with button labels.
3.3 Display Modes and Functions
The HUD supports both OBD and GPS modes, offering a wide range of data displays. The screen can rotate 270 degrees for optimal viewing.
Image: Comprehensive list of functions available in OBD and GPS modes.
OBD Mode Functions:
- Vehicle speed
- Water temperature
- Voltage
- Fuel consumption
- Engine speed (RPM)
- Single mileage
- Total mileage
- Driving time
- Driving direction
- Number of stars searched (GPS data integrated)
- Altitude (GPS data integrated)
- Time
- Intake pressure
- Oil temperature
- Air fuel ratio
- Turbo pressure
- Acceleration test
- Brake test
- Clearing fault codes
- Reading data flow
GPS Mode Functions:
- Vehicle speed
- Voltage
- Satellite time
- Altitude
- Satellite quantity
- Driving direction
- Single mileage
- Driving time
- Acceleration test
- Braking test
3.4 Display Interfaces
The device offers 8 different display screens that can be freely switched using the 'M' button. These include:
- Simple function display
- Speed display
- Multi-function display
- 6 kinds of information display
- Turbo pressure display
- Acceleration test display
- Brake test display
- Data stream display
Image: Examples of the 8 selectable display interfaces.
3.5 Unit Switching
- When the speed unit is switched to MPH, the water temperature will automatically switch to Fahrenheit (℉), the single driving distance will automatically switch to Miles, and the fuel consumption will automatically switch to Gallon MPG.
- Turbo pressure units can be adjusted and calibrated between PSI, 100kPa, and bar.
- Fuel consumption unit: KM/L.
3.6 Performance Tests
The HUD includes functions for performance testing:
- Acceleration Test: Measures the time taken to accelerate from 0 km/h to 100 km/h.
- Brake Test: Measures the time and distance taken to stop the car from a certain speed.
Image: Visual representation of acceleration and brake test functions.
4. Maintenance
4.1 General Care
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Do not use harsh chemicals or abrasive cleaners on the display or casing.
4.2 Clearing Fault Codes
In OBD mode, the device can read and clear fault codes. Navigate to the 'Clear fault code' option in the menu to perform this action. This can help resolve minor engine light issues.
5. Troubleshooting
5.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| HUD does not power on. | Loose OBD2 cable connection, vehicle not compatible, vehicle's OBD2 port not supplying power. | Check OBD2 cable connection. Ensure vehicle is running. Verify car model and year compatibility. |
| No data displayed in OBD mode. | Vehicle not OBD2 compliant, incorrect settings, faulty OBD2 connection. | Confirm vehicle OBD2 compatibility. Reconnect OBD2 cable. Check HUD settings. |
| Turbo pressure not displayed or incorrect. | Vehicle does not have a turbocharger, or it's not a 2.0T type engine. | This function requires a compatible turbocharging system in the car (e.g., 2.0T). If your car lacks this, no data will be displayed. This is a car hardware limitation. |
| GPS data is inaccurate or slow to update. | Poor satellite signal, device obstruction. | Ensure the device has a clear view of the sky. Move to an open area for better signal acquisition. |
| Display stutter or delay. | Rare, but could be a software issue. | The device has a 10 Hz refresh rate to prevent this. If it occurs, try restarting the device or vehicle. If persistent, contact support. |
5.2 Alarms
The device provides various alarms to alert the driver:
- OBD Mode Alarms: Overspeed alarm, speed alarm, water temperature alarm, voltage alarm.
- GPS Mode Alarms: Overspeed alarm, low voltage alarm.
Refer to the device settings to configure or disable specific alarms.
6. Specifications
| Feature | Specification |
|---|---|
| Product Size | 97mm * 61mm * 49mm (3.82in * 2.40in * 1.93in) |
| Net Weight | 40g |
| Display Resolution | 240*240 |
| Refresh Rate | Up to 10 Hz |
| System | OBD+GPS Dual System |
| Screen Rotation | 270 degrees |
| Turbo Pressure Units | PSI, 100kPa, Bar (adjustable) |
| Fuel Consumption Unit | KM/L (automatically switches to Gallon MPG with MPH) |
| Water Temperature Unit | Celsius (automatically switches to Fahrenheit ℉ with MPH) |
7. User Tips
- Check Compatibility First: Always verify your car's OBD2 compatibility (model and year) before installation to avoid issues. If unsure, consult customer support.
- Turbo Functionality: The turbo pressure display requires your car to have a built-in turbocharger, typically indicated by 'T' after the engine displacement (e.g., 2.0T). Without this, the function will not display data.
- Optimal Placement: Experiment with both A-pillar trim and dashboard installation to find the position that offers the best visibility and least distraction for your driving style.
- Unit Customization: Take advantage of the automatic unit switching (MPH/Fahrenheit/Miles/Gallon MPG) and manual turbo pressure unit selection to match your preferred measurement system.
- Regular Fault Code Checks: Utilize the 'Clear fault code' feature in OBD mode to quickly address minor diagnostic trouble codes and keep your vehicle's system clear.
8. Warranty and Support
For any product-related issues, technical assistance, or warranty claims, please contact the seller or manufacturer's customer support. Ensure you have your purchase details and product information readily available when contacting support.
