1. Product Overview
This CARABC module is designed to upgrade your original car screen with Wireless CarPlay and Android Auto functionality. It is compatible with specific Peugeot, Citroen, and DS vehicles equipped with the SMEG system. The module integrates seamlessly, allowing you to use navigation, music, and communication apps directly on your car's display.
Important Note: This product does not affect the original car's functions.
1.1. Key Features
- Wireless or wired CarPlay function for iPhone.
- Wireless or wired Android Auto function for Android mobile phones.
- Mirror Link/reflection function for iPhone (AirPlay).
- Mirror Link/auto link function for Android phones (AutoLink).
- USB playback function.
- Support for original car camera and reversing radar.
- Support for aftermarket rear and front cameras.
- Support for original car controls (buttons may vary based on compatibility).
- Audio output via AUX or original car Bluetooth for enhanced sound quality.
1.2. Compatibility
This module is compatible with Peugeot, Citroen, and DS vehicles that have the SMEG system. To verify your system, go to the factory settings of your car's radio and check the system version. If it displays "SMEG", this module is suitable.
Compatible Peugeot models with SMEG version:
- Peugeot 207, 307, 308, 3008, 407, 508, 5008, 807, 4008, 408, 208, 2008, Expert
Compatible Citroen and DS models with SMEG version:
- Citroen C3, C4, C5, C8, Berlingo
- DS3, DS4, DS5
If your system is NAC or RNEG, this module is not compatible. Please consult the seller for alternative solutions.
2. Setup and Installation
This module features a Plug & Play installation, requiring no modification to the original car harness.
2.1. Package Contents
The accessories included may vary slightly by model. Please refer to the goods received.
- CARABC Wireless Carplay Android Auto Module
- Power cable
- CAN Gateway Cable
- WIFI Antenna
2.2. Wiring Diagram and Connections
Refer to the detailed wiring diagram below for proper installation. Ensure all connections are secure.
- LVDS: Connect to the original vehicle LVDS.
- ANT: WIFI Antenna (cannot be pasted with metal).
- POWER: Yellow: B+, Red: ACC, Black: GND.
- Camera Power Supply (Blue wire): Connect to the rear-view, front-view camera power supply.
- Rear Detect (Brown wire): Connect the rearview light cable or 360 panoramic detection cable. For manual transmission vehicles with original reversing cameras, this connection may be required.
- 360-TX (White wire): Connect to 360 panoramic universal box TXD.
- 360-RX (White-Black wire): Connect to 360 panoramic universal box TXD.
- REAR-CVBS: Connect to rearview camera or 360-degree panoramic AHD output.
- FRONT-CVBS: Connect to the frontview camera.
- AUX: Audio output.
- USB: Connect mobile phone, USB flash drive, software upgrade.
Note on Optical Fiber Cable: If your original power cable has an optical fiber cable, you need to remove it and transfer it to the power cable of the CarPlay box.
Attention: When inserting to the host, please ensure it is stuck properly.
2.3. DIP Switch Settings
CAUTION: Please ensure CarPlay POWER is disconnected when adjusting the dip switches. Once the dip switches are set, then connect CarPlay POWER.
| 1 | 2 | Car Model |
|---|---|---|
| OFF | OFF | Default |
| OFF | ON | Another reverse data |
| 3 | 4 | Screen Size |
| OFF | OFF | 800*480 7" |
For cars with built-in reversing cameras, please turn DIP "2 ON" if the transmission is manual. After changing DIP, you need to unplug the power cord of the box and plug it back in.
3. Operating Instructions
3.1. Switching Systems
- Using Steering Wheel Buttons: Long press the 'LIST' button on your steering wheel to switch between systems.
- Using Screen Touch: Long press the upper left corner of the screen to switch systems.
3.2. Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth settings.
- In the module's interface, navigate to "Wireless CarPlay Settings" and select "Discover and connect devices".
- Select the Bluetooth device named "CX_BT....." and pair your iPhone with it.
3.3. Wireless Android Auto Connection
- On your Android phone, open Wi-Fi and Bluetooth settings.
- In the module's interface, navigate to "Wireless Android Auto Settings".
- Select the Bluetooth device named "CX-BTXXXX" and pair your Android phone with it.
3.4. Audio Settings
There are two ways to output audio from the module:
- Method 1: AUX Output Audio: Select AUX as the audio source in your car's multimedia system.
- Method 2: Original Car Bluetooth Output Audio:
- First, use your mobile phone's Bluetooth to pair with the CARABC module's Bluetooth.
- Then, use your mobile phone's Bluetooth to connect to your original car's Bluetooth device.
- Ensure the original car Bluetooth switch is turned ON. This method generally provides better sound quality.
Note: If you are using AirPlay/Mirror Link/USB play, disconnect the original car Bluetooth and select AUX as the audio source.
3.5. Voice Control
The module supports voice control (Siri for iPhone, Google Assistant for Android) for hands-free operation of phone calls, navigation, and music playback.
- Activating Voice Control: Long press the phone button on your steering wheel (without using the original car Bluetooth).
3.6. Original Vehicle Button Control
The module integrates with your car's existing buttons for control:
- Switch System: Long press the 'LIST' button on the steering wheel or long press the upper left corner of the screen.
- Answer/Hang Up Phone: Short press the phone button on the steering wheel.
- Activate Voice Control: Long press the phone button on the steering wheel (without using the original car Bluetooth).
- Volume Control: Short press the volume up/down buttons on the steering wheel.
- Reset Module: Long press the lower right corner of the screen for 15 seconds.
4. Maintenance
To ensure optimal performance and longevity of your CARABC module, keep it free from dust and moisture. Avoid exposing the unit to extreme temperatures. Periodically check all cable connections to ensure they are secure. No user-serviceable parts are inside the module; do not attempt to open or repair it yourself.
5. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
- Screen not showing normally: Check the LVDS cable connection and ensure the DIP switches are set correctly according to the installation instructions.
- No sound after installation:
- For mobile phone audio, connect your phone to the original car's Bluetooth and select the multimedia Bluetooth mode for the car audio source.
- Verify that the Multimedia and install system settings of the original car are correct.
- Black screen after installation: Check the LVDS cable line. It should transfer at the back of the main unit, not the back of the screen. Re-check DIP switch settings.
- Mainframe's pilot lamp not working: Check the power cable connection and the fuse.
- How to confirm the correct LVDS cable wire: When the screen is bright, the screen will turn black after unplugging the LVDS cable line from the back of the car host.
- How to connect Wireless CarPlay and Android Auto: Your mobile phone only needs to connect to the module's Bluetooth. The mobile phone's Bluetooth idle state should not be connected to other devices (e.g., watch recorder). Connecting to the module's Bluetooth will automatically initiate Wi-Fi transmission; you cannot manually enter a password to connect to Wi-Fi.
If the problem persists, please contact customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model | CX-SMEG-004 |
| Dimensions (L x W x H) | 25 cm x 21 cm x 7 cm (approximate package size) |
| Weight | 0.8 kg (approximate package weight) |
| Compatibility | Peugeot, Citroen, DS vehicles with SMEG system |
| Connectivity | Wireless/Wired CarPlay, Wireless/Wired Android Auto, Mirror Link, USB |
| Video Input | Supports original and aftermarket rear/front cameras (CVBS/AHD720P) |
| Audio Output | AUX, Original Car Bluetooth |
7. User Tips
- For the best audio experience, always try to use the original car's Bluetooth for audio output if available, after pairing your phone with the module's Bluetooth.
- If you experience any lag or connectivity issues with wireless features, try a wired connection to see if it resolves the problem.
- When using AirPlay, Mirror Link, or USB playback, remember to disconnect your phone from the original car's Bluetooth and select AUX as the audio source for proper sound routing.
- For manual transmission cars with an original reversing camera, you might need to manually connect the brown 'Rear Detect' wire. If unsure, consult the seller for guidance.
- Always ensure the CarPlay module's power is disconnected before making any adjustments to the DIP switches to prevent damage.
8. Warranty and Support
The CARABC Wireless Carplay Android Auto Module comes with a 1-year guarantee from the date of purchase. This warranty covers manufacturing defects and ensures free updates for the product.
For exclusive support and any inquiries, you can contact us via WhatsApp or visit our website:
- WhatsApp: +86 13794490723
- Website: www.carabc.cn
A detailed user manual in PDF format is also available for download: User manual (PDF)
