1. Introduction
This manual provides essential information for the safe and effective use of your TELESIN 1220mAh batteries and the accompanying 3-slot LED light battery charger. Designed for GoPro Hero 5, 6, 7, and 8 Black cameras, this product offers a convenient solution for charging and storing multiple batteries.
2. Product Features
- 3-Slot Charger: The mini USB charger can simultaneously charge up to three batteries.
- Fast Charging: Fully charges three batteries in approximately 1.5 hours.
- Durable Connectors: Features premium copper plugs for high performance and stability.
- Versatile Power Options: Can be powered by a wall charger adapter, power bank, PC, or laptop.
- Type-C Interface: Equipped with a Type-C cable for convenient power input.
- Advanced Circuit Protection: Includes 100% safe circuit board protection.
- LED Indicators: Three LED lights correspond to each slot, showing RED for charging and GREEN for a completed charge.
- GoPro Compatibility: Batteries are 100% compatible with GoPro Hero 8, 7, 6, and 5, matching the original battery size.
- Decoding Technology: Features upgraded battery packaging with complete decoding, preventing pop-up windows on your camera.
- High-Density Cells: Utilizes high-density Lithium-Ion cells for reliable power.
- Flame Retardant Material: Constructed from flame-retardant materials for enhanced safety.
- Low-Temperature Performance: Capable of shooting 4K30 frames for approximately 67 minutes at -20°C, comparable to original battery life.
- Nine Protection System: Automatic identification of voltage environment with multiple protection mechanisms.
3. Product Overview
Familiarize yourself with the components of your TELESIN battery and charger.

Figure 3.1: A single TELESIN 1220mAh battery, compatible with GoPro Hero 8, 7, 6, and 5 Black cameras.

Figure 3.2: The TELESIN 3-slot charger functioning as both a charging station and a storage box for batteries.
4. Setup and Charging Instructions
4.1 Initial Setup
- Remove all protective films from the batteries and charger.
- Insert up to three TELESIN batteries into the designated slots in the charger.
4.2 Charging the Batteries
- Connect the provided Type-C USB cable to the charger.
- Connect the other end of the Type-C cable to a certified 5V power adapter, power bank, PC, or laptop.
- The LED indicators on the charger will illuminate.

Figure 4.1: Multiple ways to power the TELESIN 3-slot charger.
4.3 LED Indicator Guide
- Red Light: Indicates that the battery in the corresponding slot is currently charging.
- Green Light: Indicates that the battery in the corresponding slot is fully charged.

Figure 4.2: LED indicators for charging status (Red = Charging, Green = Full).
It takes approximately 1.5 hours to fully charge three batteries simultaneously.
5. Battery Performance
The TELESIN 1220mAh batteries are designed for reliable performance, even in challenging conditions.
5.1 Estimated Battery Life
Expected recording times with a fully charged TELESIN 1220mAh battery:
- 4K/30FPS: Approximately 67 minutes
- 1080P/60FPS: Approximately 99 minutes
- 720P/120FPS: Approximately 120 minutes

Figure 5.1: Estimated battery life for various GoPro recording modes.
5.2 Low-Temperature Environment Performance
The batteries maintain performance even in cold conditions, capable of shooting 4K30 frames for about 67 minutes at -20°C, comparable to original GoPro batteries.

Figure 5.2: Battery performance in low temperatures.
6. Safety and Protection
The TELESIN charger and batteries are built with multiple safety features to ensure safe operation.
6.1 Charger Protection Features
The charger incorporates an advanced chip technology providing comprehensive protection:
- Over-charging Protection
- Short-circuit Protection
- Overcurrent Protection
- Overvoltage Protection
- Overdischarge Protection

Figure 6.1: Charger's intelligent protection features.
6.2 General Safety Warnings
- Keep the device and its cord out of reach of children under 3 years old.
- Do not swallow batteries or any parts of the device.
- Use only with specified chargers and adapters.
- Do not disassemble, crush, puncture, or short-circuit the batteries or charger.
- Do not expose to high temperatures (above 60°C / 140°F) or fire.
- Avoid extreme physical shock or vibration.
7. Technical Specifications

Figure 7.1: Detailed specifications for the TELESIN charger and battery.
7.1 Charger Specifications
| Feature | Detail |
|---|---|
| Input | 5V 2A |
| Output | 4.3V, 800mAh * 3 |
| Size | 46mm * 46mm * 49mm |
| Interface | Type-C |
7.2 Battery Specifications
| Feature | Detail |
|---|---|
| Capacity | 1220mAh |
| Material | Li-ion (Lithium-Ion) |
| Rated Voltage | 3.85V |
| Compatibility | GoPro Hero 5, 6, 7, 8 Black Camera |
| Certifications | CE, RoHS |
8. Maintenance and Storage
8.1 Cleaning
- Turn off the charger and remove batteries before cleaning.
- Use a soft, lint-free cloth to wipe the charger and batteries. Do not use harsh chemicals or abrasive materials.
8.2 Storage
- Store the charger and batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage (if not used for several months), charge the batteries to approximately 50% capacity every 3 months to prolong their lifespan.
- The charger also functions as a storage box, keeping your batteries organized and protected.
9. Troubleshooting
9.1 Charger Not Working / Batteries Not Charging
- Ensure the Type-C cable is securely connected to both the charger and the power source.
- Verify that the power source (adapter, power bank, PC) is functioning correctly and providing 5V 2A output.
- Check if the batteries are inserted correctly into the charger slots.
- If an LED indicator remains off or flashes erratically, try a different battery or charging slot to isolate the issue.
9.2 Short Battery Life
- Ensure batteries are fully charged (Green LED).
- Battery performance can decrease over time with repeated use.
- Extreme temperatures (very hot or very cold) can affect battery life.
- High-resolution video recording (e.g., 4K) consumes battery faster. Refer to the estimated battery life section.
10. Disposal and Recycling
This symbol (a crossed-out wheeled bin) on the product or its packaging indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health. Please contact your local authorities for information on proper disposal and recycling facilities.
11. Additional Resources
A generic user manual template in PDF format is available for reference. Please note that this PDF is a general template and may not contain specific instructions tailored to this exact product model.