Introduction
The LEXXSON CarPlay Android Auto Retrofit Kit is designed to upgrade your vehicle's infotainment system by adding CarPlay and Android Auto functionality. This decoder box integrates seamlessly with your existing display and retains the original vehicle controls, including the rotary controller and steering wheel buttons, providing an OEM-like experience.
Key Features:
- CarPlay Video Interface specifically for VW Tiguan, Lamando, Magotan, Teramont, and other models with MIB2 Platform.
- Built-in 2.4G and 5.8G Wi-Fi for stable connection and Bluetooth 5.0 Technology.
- Supports both wired and wireless CarPlay and Android Auto.
- Control via original steering wheel controls, touch control (if vehicle equipped), and voice control (e.g., "Hey Siri...").
- Compatible with popular GPS navigation apps like Google Maps, Waze, and Apple Maps, offering live traffic information.
- Plug-and-play, non-destructive installation without requiring wire cuts.
- Allows switching between the CarPlay display and the original factory system at any time using existing controls.
Package Contents
Please verify that all items are present in your package:
- 1 x LEXXSON VW Decoder Box
- 1 x Power Harness
- 2 x LVDS Cable
- 1 x USB/MIC Cable
- 1 x Wi-Fi Antenna
Setup and Installation
Before installation, ensure your vehicle is compatible. This kit is suitable for VW vehicles with an 8/9-inch display and an MIB2 unit located in the glovebox. If you are unsure about compatibility, please contact customer support with photos of your car’s center console and glovebox.
Wiring Diagram
Follow the detailed wiring diagram below for proper connection. Ensure all cables are securely connected to their respective ports.
DIP Switch Setup
The decoder box features toggle (DIP) switches that must be set according to your specific car model, year, and screen size. Refer to the tables below to configure the switches correctly. The DIP switches are typically located on the side of the decoder box.
| Model | Years | Screen | DIP |
|---|---|---|---|
| Phideon | 2017-2020 | 8-inch | 3/4 ON |
| Phideon | 2017-2020 | 9-inch | 1/2/3 ON |
| Tiguan L | 2021-2022 | 8-inch | 2/3 ON |
| Tiguan L | 2022 | 9-inch | 1/4 ON |
| Touran L | 2017-2019 | 8-inch | 1/2/4 ON, 1/3/4 ON |
| Touran L | 2021-2022 | 8-inch | 2/3 ON |
| Touran L | 2022 | 9-inch | 1/4 ON |
| Magotan | 2022 | 9-inch | 1/4 ON |
| Passat | 2022 | 9-inch | 1/4 ON |
| T-Cross | 2022 | 9-inch | 1/4 ON |
| Superb | 2022 | 9-inch | 1/4 ON |
| Sagitar | 2018 | 8-inch | 2/4 ON |
| Model | Years | Screen | DIP |
|---|---|---|---|
| SUPERP-B | 2014-2019 | 8-inch | 230N/30N |
| Octavia | 2014-2019 | 8-inch | 230N/30N |
| KODIAQ | 2014-2019 | 8-inch | 230N/30N |
| KOROC | 2014-2019 | 8-inch | 230N/30N |
| KAMIQ | 2014-2019 | 8-inch | 230N/30N |
| Model | Years | Screen | DIP |
|---|---|---|---|
| Arona | 2016-2019 | 8-inch | 124/234 |
| New Leon | 2016-2019 | 8-inch | 124/234 |
| NEW IBIZA | 2016-2019 | 8-inch | 124/234 |
| Toledo Ateca | 2016-2019 | 8-inch | 124/234 |
| Seat Leon | 2016-2019 | 8-inch | 124/234 |
Operating Instructions
Switching Between Systems
The kit allows for a one-key switch between the original car system and the CarPlay/Android Auto interface, retaining all functions of the original car.
CarPlay and Android Auto
Connect your iPhone for wired or wireless CarPlay, or your Android phone for Android Auto. This allows you to access navigation, music, messages, and other apps directly on your car's screen.
Voice Control
Utilize voice commands like "Hey Siri" for CarPlay or Google Assistant for Android Auto to control various functions, including music playback, navigation, and making calls, enhancing safety and convenience while driving.
Navigation and Multimedia
Access precise online navigation with real-time updates and enjoy mobile music playback with high-fidelity sound quality. The system supports various third-party mobile apps for entertainment and utility.
Camera Functionality
The system supports both factory original reverse cameras and parking radar, as well as aftermarket reverse cameras and 360-degree camera systems.
Original Vehicle Controls
The kit maintains compatibility with your vehicle's original controls, including key operations and steering wheel controls, ensuring a familiar and integrated user experience.
Maintenance
The LEXXSON CarPlay Android Auto Retrofit Kit is designed for durability and minimal maintenance. To ensure optimal performance:
- Keep the unit and connections free from dust and moisture.
- Avoid exposing the unit to extreme temperatures.
- Ensure all cables are securely connected to prevent signal loss or intermittent functionality.
- Periodically check for firmware updates from the manufacturer to enhance features and stability.
Troubleshooting
If you encounter issues with your retrofit kit, please refer to the following common troubleshooting steps:
- No Display/Black Screen: Check all power and LVDS cable connections. Ensure the DIP switches are set correctly for your vehicle model.
- No Sound: Verify the AUX connection (if used) and ensure the car's audio input is set to the correct source. Check volume levels on both the car and the connected phone.
- CarPlay/Android Auto Not Connecting: Ensure Wi-Fi and Bluetooth are enabled on your phone. For wireless connections, try forgetting the device and re-pairing. For wired connections, try a different USB cable.
- Controls Not Responding: Confirm that the kit is correctly integrated with the vehicle's CAN-bus system. Check for any loose connections to the original car controls.
- Intermittent Connection: This could be due to weak Wi-Fi signal (for wireless connections) or a faulty cable. Try moving your phone closer to the unit or replacing the USB cable.
- App Compatibility (e.g., Netflix): While the system supports many third-party apps, some streaming services like Netflix may have restrictions on video playback while driving for safety reasons. This is typically a software limitation of the app or the CarPlay/Android Auto platform itself, not a defect of the retrofit kit.
If problems persist, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | RM-VW9013W |
| Compatibility | VW, Skoda, Seat models with MIB2 platform (8/9-inch screen) |
| Connectivity | 2.4G & 5.8G Wi-Fi, Bluetooth 5.0 |
| Supported Systems | Wired & Wireless CarPlay, Android Auto |
| Control Methods | Steering wheel controls, touch control (vehicle dependent), voice control |
| Navigation | GPS navigation apps (Google Maps, Waze, Apple Maps) with live traffic |
| Camera Support | Factory original reverse camera, parking radar, aftermarket reverse/360 cameras |
| Dimensions (Decoder Box) | 15 cm (Length) x 10 cm (Width) x 2.5 cm (Height) |
| Weight (Package) | 0.9 kg |
User Tips
- Verify Compatibility: Always double-check your car's model, year, and screen size against the provided compatibility tables and DIP switch settings before installation. When in doubt, consult customer support.
- Secure Connections: Ensure all wiring harness connections are firm and properly seated to prevent intermittent issues or signal loss.
- App Functionality: Be aware that some video streaming apps (like Netflix) may restrict playback while the vehicle is in motion due to safety protocols inherent in CarPlay/Android Auto, regardless of the retrofit kit's capabilities.
- Voice Command Practice: Familiarize yourself with voice commands for navigation and media playback to minimize distractions while driving.
Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact LEXXSON customer support. Provide your product model number (RM-VW9013W) and a detailed description of the issue for efficient service.
The manufacturer offers support for product-related issues and installation guidance. Please refer to your purchase documentation for specific warranty terms and contact information.
