AYINO MR265

Contents

AYINO MR265 2-in-1 Bluetooth 5.2 Audio Transceiver & Receiver User Manual

Model: MR265 | Brand: AYINO

Introduction

The AYINO MR265 is a versatile 2-in-1 Bluetooth 5.2 audio transceiver, functioning as both a receiver (RX) and a transmitter (TX). Equipped with a Qualcomm QCC chip, it offers high-fidelity audio transmission with support for advanced codecs like aptX Adaptive, aptX HD, and aptX Low Latency. This device is designed to seamlessly integrate wireless audio into your existing home entertainment systems, providing flexible connectivity options through optical, coaxial, and 3.5mm AUX interfaces, along with a unique Bypass function for synchronous output.

AYINO MR265 Bluetooth Receiver & Transmitter with key features
Figure 1: AYINO MR265 device highlighting Hi-Res, 2-in-1 functionality, 20M transmission, Optical/Coaxial/AUX support, Qualcomm BT5.2, 28H/1000mAh battery, aptX HD, aptX Adaptive, DAC, and Bypass features.

Key Features

  • Bluetooth V5.2 with Qualcomm QCC Chip: Ensures optimal transmission efficiency, stability, and ultra-low power consumption.
  • Advanced Audio Codec Support: Supports aptX Adaptive, aptX HD, aptX Low Latency, AAC, and SBC for seamless high-fidelity CD quality stereo sound.
  • 2-in-1 Functionality: Operates as both a Bluetooth Receiver (RX) and a Bluetooth Transmitter (TX).
  • BYPASS Function: Allows conversion of any single input (optical, coaxial, or AUX) to synchronous output via optical, coaxial, AUX, or Bluetooth transmission.
  • Multiple Compatible Interfaces: Features optical, coaxial, and 3.5mm AUX for both audio input and output.
  • Extended Range: External antenna provides up to 20 meters of long-distance transmission indoors without interruption.
  • Long Battery Life: Built-in 1000mAh battery offers up to 28 hours of operation on a single charge. Can be used while charging.
  • Independent Headphone Amps: Delivers purer sound quality with stereo dual-channel sound effect, outputting 80mW * 2 (32 Ω) with THD+N=0.1%.
  • Smart Power Management: Includes automatic shutdown after 30 minutes without connection and automatic power-on with intelligent reconnection.
  • User-Friendly Design: Features anti-slip silicone pads and a hanging hole design for flexible placement.

Package Contents

The following items are included in your AYINO MR265 package:

  • AYINO MR265 Bluetooth Transceiver Unit
  • Power Adapter (EU/US/AU/UK Adapter, depending on selection)
  • Power Cable (USB)
  • 3.5mm Audio Cable
  • Optical Cable
  • Coaxial Cable
Included accessories: Power Adapter, USB Power Cable, 3.5mm Cable, Optical Cable, Coaxial Cable
Figure 2: Contents of the AYINO MR265 package, including various cables and power adapter.

Specifications

Feature Detail
Brand AYINO
Model MR265
Bluetooth Version V5.2
Bluetooth Protocol A2DP/AVRCP/PBAP
Bluetooth Encoding (TX Mode) aptX Adaptive/aptX HD/aptX LL/aptX/SBC
Bluetooth Encoding (RX Mode) aptX Adaptive/aptX HD/aptX/AAC/SBC
Input/Output Interface Fiber optic/Coaxial/AUX (3.5mm)
Battery Capacity 1000mAh
Effective Distance ≥ 20m (in open areas)
Working Hours (RX Mode) 28 hours
Working Hours (TX Mode) 26 hours
Charging Time 3 hours
Input Voltage DC 5V
Product Size 120 x 75 x 27mm
Product Weight 107g
Sound Track Double
Certification CE, FCC
Table of product parameters including brand, model, Bluetooth version, protocols, battery, and dimensions.
Figure 3: Detailed product parameters for the AYINO MR265.

Setup and Connections

1. Charging the Device

The MR265 has a built-in 1000mAh rechargeable lithium battery. Connect the provided USB power cable to the Type-C Charging Port on the device and to a DC 5V power source (e.g., the included power adapter, a computer USB port). The Charging Indicator light will illuminate during charging. A full charge takes approximately 3 hours. The device can be used while charging.

A physical switch allows you to cut off the battery power when not in use for extended periods.

Diagram showing the AYINO MR265 charging and battery life in RX and TX modes.
Figure 4: Battery life and charging details for the AYINO MR265.

2. Interface Overview

The MR265 offers a variety of input and output ports:

  • AUX Input/Output: 3.5mm audio jack for analog connections.
  • Coaxial Input/Output: For digital audio connections.
  • Optical Input/Output: For digital audio connections (Toslink).
  • Type-C Charging Port: For power input.
  • Charging Indicator Light: Shows charging status.
Detailed view of the AYINO MR265 interfaces, including AUX, Coaxial, Optical, and Type-C charging ports.
Figure 5: Labeled diagram of the AYINO MR265's input and output interfaces.

3. Mode Switching (RX/TX)

The device features a physical switch to toggle between Receiver (RX) and Transmitter (TX) modes. Ensure the correct mode is selected for your desired operation.

Bottom view of the AYINO MR265 showing the RX/TX mode switch and power supply switch.
Figure 6: Location of the RX/TX mode switch and battery/external power supply switch.

Operating Modes

1. Transmitter (TX) Mode

In TX mode, the MR265 converts audio signals from its input ports (fiber optic, coaxial, or AUX) into Bluetooth signals for wireless transmission. This allows you to connect audio output devices such as TVs, projectors, set-top boxes, or game consoles and transmit audio to Bluetooth headphones, speakers, or other Bluetooth-enabled audio devices. The device supports a one-to-two connection, meaning it can transmit to two Bluetooth devices simultaneously.

  • CODEC TX MODE: aptX Adaptive, aptX HD, aptX LL, aptX, SBC
Diagram showing the AYINO MR265 in TX mode, transmitting audio from a TV, projector, set-top box, or game console to Bluetooth headphones.
Figure 7: Wireless audio transmission setup in TX mode.

2. Receiver (RX) Mode

In RX mode, the MR265 receives Bluetooth audio signals from your mobile phone, tablet, or computer and outputs them to traditional audio devices such as wired headphones, old speakers, or amplifiers. This rejuvenates older audio equipment by adding wireless Bluetooth playback capabilities. The RX mode supports multi-point connection, allowing synchronous output to up to three connected devices.

  • CODEC RX MODE: aptX Adaptive, aptX HD, aptX, AAC, SBC
Diagram showing the AYINO MR265 in RX mode, receiving Bluetooth audio from a phone, tablet, or computer and outputting to headphones, amplifier, or speakers.
Figure 8: Wireless audio reception setup in RX mode.

3. BYPASS Function

The BYPASS function allows any single input audio signal (from fiber optic, coaxial, or AUX) to be converted into Bluetooth transmission (one to two) and simultaneously outputted via fiber optic, coaxial, and AUX. This feature effectively solves the problem of frequent unplugging and wiring when using multiple devices, enabling a perfect connection between your various audio systems and your TV.

Diagram illustrating the Bypass function, showing synchronous output from various interfaces.
Figure 9: Bypass function for synchronous audio output.

Controls and Indicators

The AYINO MR265 features a multifunctional display area and several control buttons:

  • Power Button: Long press to power the device on or off.
  • TX Mode Button: Short press for Bluetooth pairing (Pairing 1). Double click for Bluetooth pairing (Pairing 2). Short press during transmission to Broadcast/Pause.
  • RX Mode Button: Short press for Bluetooth pairing. Short press during reception for Previous Song or Next Track.
  • Volume Buttons (+/-): Long press in RX/TX mode to increase or decrease volume.
  • Multifunctional Display Area: Shows current mode (TX/RX), active input/output (AUX, OPT, COAX), and active Bluetooth codecs (SBC, APTX, LL, HD).
  • Codec Indicators: When the "LL/HD" position lights up, it indicates that the connected device supports aptX Adaptive. Other illuminated positions indicate other connected protocol devices.
Close-up of the AYINO MR265 display showing aptX codec indicators.
Figure 10: Intelligent recognition of aptX sound quality via LED indicators.
Detailed view of the AYINO MR265 buttons and their functions.
Figure 11: Product details showing button layout and functions.

Troubleshooting

  • No Sound:
    • Ensure the device is powered on and charged.
    • Verify that the correct mode (TX/RX) is selected.
    • Check all audio cables (Optical, Coaxial, AUX) are securely connected to both the MR265 and your audio source/destination.
    • Confirm that the volume on both the MR265 and the connected audio devices is not muted or too low.
    • In TX mode, ensure your Bluetooth receiving device (headphones/speakers) is paired and connected.
    • In RX mode, ensure your Bluetooth transmitting device (phone/tablet) is paired and playing audio.
  • Cannot Pair Bluetooth Device:
    • Ensure the MR265 is in the correct mode (TX for transmitting, RX for receiving).
    • Put the MR265 into pairing mode (short press the TX or RX button as per instructions).
    • Ensure your other Bluetooth device is also in pairing mode and within range (within 20 meters).
    • Clear previous Bluetooth connections on both devices and try pairing again.
  • Short Transmission Range or Intermittent Connection:
    • Ensure there are no significant physical obstructions (thick walls, metal objects) between the MR265 and the connected Bluetooth device.
    • Minimize interference from other wireless devices (Wi-Fi routers, microwaves).
    • Ensure the external antenna is properly attached and oriented.
    • Keep devices within the recommended 20-meter range.
  • Audio Delay (Latency):
    • Ensure both the MR265 and your connected Bluetooth device support aptX Low Latency (aptX LL) or aptX Adaptive for minimal delay. The 'LL' indicator on the display should light up.
    • Some older Bluetooth devices or codecs (like SBC) naturally have higher latency.

User Tips

  • Optimal Audio Quality: For the best audio experience, use optical or coaxial connections for digital audio input/output whenever possible, especially when utilizing aptX HD or aptX Adaptive codecs.
  • Codec Verification: Pay attention to the indicators on the device's display to confirm which Bluetooth audio codec (SBC, aptX, LL, HD) is currently active. This helps ensure you're getting the desired audio quality and latency.
  • Battery Preservation: If you plan not to use the device for an extended period, use the physical battery cut-off switch to preserve battery life.
  • Placement: For maximum range and stable connection, place the MR265 in an open area, away from other electronic devices that might cause interference.
  • Automatic Features: Take advantage of the automatic shutdown feature (after 30 minutes without music) and automatic reconnection upon power-on for convenience and energy saving.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the device with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.
  • Antenna: Ensure the external antenna is not bent or damaged, as this can affect transmission range and stability.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.