AYINO MR260

Contents

AYINO MR260 Bluetooth Transmitter Receiver User Manual

2-in-1 Bluetooth 5.2 Audio Adapter with AptX Support

1. Product Overview

The AYINO MR260 is a versatile 2-in-1 Bluetooth 5.2 audio adapter designed to function as both a transmitter (TX) and a receiver (RX). Equipped with a Qualcomm QCC chip, it supports various aptX protocols, including aptX Adaptive, aptX HD, and aptX Low Latency, ensuring lossless, low-latency, and CD-level sound quality. Its compact design and dual-mode compatibility make it suitable for a wide range of audio devices, from car stereos and home speakers to TVs and headphones.

AYINO MR260 Bluetooth Transmitter Receiver
The AYINO MR260 Bluetooth Transmitter Receiver.
AYINO MR260 with aptX logos and microphone
The AYINO MR260 highlighting aptX support and built-in microphone for RX mode.
AYINO MR260 in hand for size comparison
The compact and exquisite design of the AYINO MR260, easily held in one hand.

2. Package Contents

Please check the package for the following items:

  • AYINO MR260 Bluetooth Transmitter Receiver
  • USB-A to USB-C Power Cable
  • 3.5mm Audio Cable
  • 3.5mm to RCA (Lotus Line) Audio Cable
  • Lanyard
  • User Manual (this document)
AYINO MR260 with included accessories
The AYINO MR260 device and its accompanying accessories.

3. Device Layout and Controls

Familiarize yourself with the device's ports and controls:

AYINO MR260 device layout with ports and controls
Detailed view of the MR260's ports and controls.
  • On/Off Switch: Powers the device on or off.
  • Receive/Transmit One-Key Switch: Toggles between RX (Receiver) and TX (Transmitter) modes.
  • Microphone: For voice calls in RX mode.
  • 3.5mm Input/Output: Universal audio jack for connecting to audio sources or output devices.
  • Type-C Charging Port: For charging the device.
  • Control Buttons (Side):
    • RX Mode: Up/Down buttons control volume (+/-).
    • TX Mode: Click to mute.
    • Multi-function Button: Click to connect back to a previously paired device, double-click to enter pairing mode. In RX mode, also functions as pause/play/answer/hang up/reject for calls.
  • LED Indicators: Display current CODEC (SBC, AAC, APTX, LL, HD, AD) and mode (RX/TX).

4. Setup and Operation

4.1 Powering On/Off

Slide the On/Off switch to power on or off the device.

4.2 Switching Modes (RX/TX)

Use the Receive/Transmit one-key switch to select the desired mode:

  • RX (Receiver) Mode: To receive audio wirelessly from a Bluetooth source (e.g., smartphone, tablet) and output it to a non-Bluetooth device (e.g., wired headphones, speakers, car stereo).
  • TX (Transmitter) Mode: To transmit audio wirelessly from a non-Bluetooth source (e.g., TV, projector, CD player) to Bluetooth-enabled headphones or speakers.

4.3 Pairing in RX (Receiver) Mode

In RX mode, the MR260 allows your traditional audio equipment to receive Bluetooth audio. It supports multi-point connection, allowing two mobile phones to connect simultaneously.

  1. Switch the device to RX mode.
  2. Connect the MR260 to your non-Bluetooth audio device (e.g., headphones, speakers, amplifier) using the 3.5mm audio cable or 3.5mm to RCA cable.
  3. The MR260 will automatically enter pairing mode (LED indicator may flash).
  4. On your Bluetooth-enabled source device (e.g., smartphone, tablet, computer), search for Bluetooth devices and select "MR260" to connect.
  5. Once connected, the LED indicator will show the active CODEC.
Wireless audio receiver setup diagram
Setup for RX (Receiver) mode, connecting mobile devices to traditional audio equipment.

4.4 Pairing in TX (Transmitter) Mode

In TX mode, the MR260 enables your non-Bluetooth audio source to transmit audio to Bluetooth headphones or speakers. It supports dual-stream one-to-two connection, allowing two Bluetooth headphones to connect simultaneously.

  1. Switch the device to TX mode.
  2. Connect the MR260 to your non-Bluetooth audio source (e.g., TV, projector, CD player) using the 3.5mm audio cable or 3.5mm to RCA cable.
  3. Place your Bluetooth headphones or speakers into pairing mode.
  4. The MR260 will actively search for and connect to nearby Bluetooth devices. For new devices, you may need to double-click the multi-function button to initiate pairing.
  5. Once connected, the LED indicator will show the active CODEC.
Wireless audio transmission setup diagram
Setup for TX (Transmitter) mode, transmitting audio from a TV/projector to Bluetooth headphones.

4.5 LED Indicators for CODEC Recognition

The front of the device features LED lights that indicate the active audio CODEC, providing clear feedback on the sound quality being transmitted or received.

LED indicators for aptX sound quality recognition
Explanation of LED indicators for various aptX and other audio codecs.
  • AD (aptX Adaptive): When this LED is on, it indicates that the connected device is using aptX Adaptive.
  • Other Lights (SBC, AAC, APTX, LL, HD): These lights indicate other audio mode devices are connected and the corresponding CODEC is active.
aptX protocol delay comparison table
Comparison of various aptX protocols and their respective delays and audio quality.

5. Maintenance and Charging

5.1 Charging the Device

The MR260 has a built-in 250mAh Li-polymer battery. To charge:

  1. Connect the supplied USB-A to USB-C power cable to the Type-C charging port on the MR260.
  2. Connect the other end of the USB cable to a DC5V/0.5A USB power adapter (not included) or a computer USB port.
  3. The charging time is approximately 1.5 hours.
  4. The device can be used while charging.

5.2 Battery Life

A full charge provides:

  • RX Mode: More than 15 hours of continuous use.
  • TX Mode: More than 12 hours of continuous use.
Battery life and charging diagram
Visual representation of battery life in RX and TX modes, and charging time.

5.3 General Care

  • Keep the device dry and away from moisture.
  • Avoid exposing the device to extreme temperatures.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals.

6. Troubleshooting

  • Device does not power on: Ensure the battery is charged. Connect to a power source and try again.
  • Cannot pair with a device:
    • Ensure the MR260 is in the correct mode (RX or TX).
    • Make sure the MR260 and the target device are within 10 meters range.
    • For new devices in TX mode, double-click the multi-function button to force pairing.
    • Ensure the target device is in pairing mode.
  • No sound or poor sound quality:
    • Check all audio cable connections.
    • Verify the volume levels on both the MR260 and the connected audio devices.
    • Ensure the correct CODEC LED is lit, indicating a successful audio profile connection.
    • If experiencing low quality, ensure both devices support the desired aptX protocol.
  • Intermittent connection: Ensure no obstructions are between the MR260 and the connected Bluetooth device. Move closer to reduce interference.
  • Bluetooth version verification: If you suspect issues with the Bluetooth version, you can check the Qualcomm QCC chip model online for verification.

7. Specifications

FeatureDetail
BrandAYINO
Model NumberMR260
Bluetooth Version5.2
Bluetooth ChipQualcomm QCC
Supported Protocols (RX)aptX Adaptive/aptX HD/aptX/AAC/SBC (A2DP/AVRCP)
Supported Protocols (TX)aptX Adaptive/aptX HD/aptX LL/aptX/SBC (A2DP)
Wireless Work RangeUp to 10 meters
Input/Output Interface3.5mm Audio Interface
Charging MethodUSB Type-C 5V/0.5A
Power InputDC5V
Built-in Battery3.7V/250mAh Li-polymer Battery
Working Time (RX)>15 Hours
Working Time (TX)>12 Hours
Charging TimeApprox. 1.5 Hours
Dimensions (L x W x H)50 × 35 × 13.7 mm
Signal-to-Noise Ratio≥99.3dB
Working Frequency Band2.402GHz-2.480GHz
CertificationsCE, FCC
Product parameters table
Official product parameters for the AYINO MR260.

8. User Tips

  • Improved Launch Mode: The upgraded MR260 does not automatically enter pairing state when turned on. It prioritizes connecting to devices already in its pairing list. This is particularly useful for multi-device users to prevent unintended connections to new, unknown devices.
  • Volume Adjustment in TX Mode: The TX mode now includes volume adjustment. This feature can also be turned off to save memory if not needed.
  • No Indicator Sounds: Unlike some previous models, this upgraded version has canceled all indicator sounds, which is beneficial when pairing with high-sensitivity audio equipment to avoid unwanted noise.
  • Portability: The MR260 is mini-sized (48x48x12mm) and comes with a standard lanyard, making it easy to carry and use on the go.
  • Stable Connection: Featuring a new Qualcomm QCC chip and Bluetooth 5.2, the device offers stable, lossless transmission and a fast, low-power connection, minimizing audio interruptions.
Stable long-distance connection diagram
The MR260 offers stable long-distance connection up to 10 meters in open space.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.