OnePlus Buds 3V

OnePlus Buds 3V In-Ear Wireless Headphones

User Manual

Introduction

Welcome to the user manual for your new OnePlus Buds 3V In-Ear Wireless Headphones. These headphones are designed to provide a superior audio experience with features like a 12.4mm dynamic driver, dual-mic AI call noise cancelling, 3D Spatial Audio, and ultra-low gaming latency. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your device to ensure you get the most out of your headphones.

OnePlus Buds 3V key features: 54-hour battery life, 12.4mm large dynamic driver, ultra-low gaming latency, 3D Spatial Audio

Image: Overview of OnePlus Buds 3V key features.

Setup

1. Initial Pairing

  1. Ensure your OnePlus Buds 3V are charged.
  2. Open the charging case. The headphones will automatically enter pairing mode.
  3. On your mobile device (smartphone, tablet, etc.), go to Bluetooth settings.
  4. Select "OnePlus Buds 3V" from the list of available devices to connect.
  5. For compatible OnePlus devices, a pop-up pairing notification may appear for quick connection.
OnePlus Buds 3V auto-pairing feature with a smartphone showing a pop-up connection prompt.

Image: Automatic pop-up pairing for quick connection.

2. Dual Device Connection

The OnePlus Buds 3V supports simultaneous connection to two devices. This allows for seamless switching between listening to music on one device and taking calls on another.

  1. Pair the headphones with your first device as described above.
  2. Put the headphones back in the case, then open the case and press and hold the function button (if available, or refer to device-specific instructions for entering pairing mode again).
  3. Pair the headphones with your second device.
  4. The headphones will now be connected to both devices and can switch automatically based on audio playback.
OnePlus Buds 3V connected to both a smartphone and a tablet simultaneously.

Image: Dual device connection for seamless audio switching.

3. Huanlv App Installation (for extended features)

To unlock more exciting features and customize your listening experience, download and install the Huanlv App on your smartphone. The app allows you to check battery levels, adjust sound effects, manage dual device connections, personalize pop-ups, and configure gaming mode settings.

Screenshot of the Huanlv App interface showing features like battery level, sound effects, device connection, personalized pop-ups, and gaming mode settings.

Image: Huanlv App features overview.

Operating Instructions

1. Basic Controls

The OnePlus Buds 3V feature touch controls for various functions:

  • Play/Pause: Single tap on either earbud.
  • Next Track: Double tap on the right earbud.
  • Previous Track: Double tap on the left earbud.
  • Answer/End Call: Single tap on either earbud.
  • Reject Call: Press and hold either earbud.
  • Activate AI Voice Assistant: Tap the earbuds to instantly activate your AI assistant for tasks like making calls, playing music, or checking the weather.
  • Remote Control Photo: Double-tap the earbuds to remotely control your phone's camera and initiate a 3-second countdown for taking photos.
Person using OnePlus Buds 3V to remotely control a phone camera for a group photo.

Image: Remote control photo function using earbuds.

OnePlus Buds 3V with text bubbles indicating 'Make a small call', 'Heart Broadcast Music', and 'Check weather' for AI voice assistant functions.

Image: AI voice assistant capabilities.

2. Advanced Audio Features

  • 3D Spatial Audio: Experience immersive surround sound with precise directional audio positioning for a realistic 360-degree soundstage.
  • Personalized EQ: Use the Huanlv App to access 6 customizable EQ frequencies and three preset master tuning modes for deeper bass, clearer midrange, and brighter treble.
  • Dual-mic AI Call Noise Reduction: Dual microphones combined with AI algorithms accurately pick up and amplify human voices while filtering ambient noise, ensuring ultra-clear calls.
Diagram illustrating 3D Spatial Audio with sound waves emanating from the earbuds.

Image: 3D Spatial Audio for immersive sound.

People listening to music with earbuds, with a graphic showing 3-level master tuning and 6-band custom EQ frequencies.

Image: Personalized EQ settings for custom sound profiles.

3. Gaming Mode (Low Latency)

Equipped with Bluetooth 5.4 protocol, the Buds 3V offer ultra-low latency as low as 47ms, ensuring synchronized audio and video for an enhanced gaming experience. Activate gaming mode via the Huanlv App for optimal performance.

Smartphone displaying a game with earbuds and '47ms low latency' text, indicating synchronized audio and video.

Image: 47ms low latency for gaming.

4. Find Headphones

If you misplace your earbuds, use the "Find Headphones" feature on your phone (via the Huanlv App) to easily locate them by sound.

Smartphone screen showing 'Find Headphones' interface with a map and sound activation option.

Image: 'Find Headphones' feature on a smartphone.

5. AI Translate

For communication across language barriers, activate AI Translate 9 on your phone. With one tap, you can break language barriers and chat smoothly.

Smartphone screen showing an AI translation interface with earbuds, translating 'Where is the nearest station?' from English to Simplified Chinese.

Image: AI Translate feature in action.

Maintenance

1. Charging

To charge your OnePlus Buds 3V, place them in the charging case and connect the case to a power source using a Type-C cable. A 10-minute fast charge provides up to 8 hours of continuous listening.

OnePlus Buds 3V charging case connected via USB-C, showing '10 Minutes of fast charging' for '8 Hours of continuous listening'.

Image: Fast charging capabilities.

2. Cleaning and Care

The earbuds are IP55 dustproof and waterproof, making them resistant to sweat and rain. However, it is recommended to wipe them clean with a dry, soft cloth after use, especially after workouts, to maintain hygiene and performance. Avoid submerging them in water.

OnePlus Buds 3V earbuds with water droplets, illustrating IP55 dustproof and waterproof rating.

Image: IP55 Dustproof and Waterproof rating.

3. Durability

The OnePlus Buds 3V have undergone rigorous durability testing:

  • 75Β°C extreme temperature test.
  • 1.5m drop test for the charging case.
  • 1.8m drop test for the headphones.
  • Over 20,000 open-close tests for the charging case.

These tests ensure robust performance and longevity under various conditions.

Diagram showing durability tests: 75Β°C extreme temperature test, 1.5m drop test (charging case), over 20,000 open-close tests, 1.8m drop test (headphones).

Image: Durability tests for the earbuds and charging case.

Troubleshooting

Common Issues and Solutions:

  • Headphones not pairing: Ensure the earbuds are charged and the charging case is open. Check your device's Bluetooth settings and try re-pairing.
  • No sound from one earbud: Place both earbuds back in the charging case, close it, wait a few seconds, then open it again to reset the connection.
  • Poor call quality: Ensure the earbuds are clean and properly seated in your ears. Check for strong Bluetooth signal and minimize environmental noise.
  • Battery draining quickly: Ensure the earbuds are fully charged. Reduce volume levels and disable features like ANC if not needed to conserve battery.
  • Touch controls unresponsive: Ensure your fingers are clean and dry. Try resetting the earbuds by placing them in the case and closing it.

If issues persist, refer to the Huanlv App for additional diagnostic tools or contact customer support.

Specifications

Feature Specification
Product Model (Headphones/Charging Case) E520A
Sound Unit 12.4mm Dynamic Driver Unit
Speaker Sensitivity 112Β±3dB
Frequency Response Range 20 Hz - 20 kHz
Microphone Sensitivity -38 dBV/Pa
Bluetooth Version 5.4
Bluetooth Effective Distance 10m
Bluetooth Codec AAC/SBC
Battery Type Rechargeable Lithium-ion Battery
Battery Capacity 58mAh (Single Headphone), 560mAh (Charging Case)
Music Playback Time (AAC Codec, Default Settings, 50% volume) 12h (Single Charge) / 54h (With Charging Case)
Charging Time Approx. 60min (headphones), Approx. 120min (headphones + charging case)
Charging Input (charging case) 5V~0.9A
Charging Input (single headphone) 5V~0.17A
Charging Output (charging case to headphone) 5V~0.35A
Charging Port Type-C
Water Resistance Rating (headphones) IP55
Dimensions - Overall 60.20mm * 47.50mm * 24.00mm
Dimensions - Headphones 31.10mm * 20.30mm * 23.30mm
Net Weight - Entire Unit 38.6g Β± 2g
Net Weight - Headphones 4.5g Β± 0.2g

Image: Detailed product parameters table.

Detailed product parameters table for OnePlus Buds 3V.

Compatibility

Feature Color OS 12.0 And above version mobile phones Android 7.0 And above version mobile phones iOS 13.2 And above version mobile phones
Pairing Pop-up βœ“ / /
Reconnection Pop-up βœ“ "Manual app required. "Huan Lvyu" Lab Function > Enable pop-up in Device Connection Pop-up." /
Headphones & Charging Case Battery level display βœ“ βœ“ βœ“
Space Sound *Specific model support details / /
Control Customization βœ“ βœ“ βœ“
Personalized Pop-up βœ“ βœ“ /
Remote control photo βœ“ / /
Device Dual Connection βœ“ βœ“ βœ“
Find headphones βœ“ βœ“ βœ“
Game Mode βœ“ βœ“ βœ“

Image: Compatibility table for various features across different mobile operating systems.

Compatibility table for OnePlus Buds 3V features across Color OS, Android, and iOS.

Warranty and Support

Your OnePlus Buds 3V are covered by a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, or for technical support, please visit the official OnePlus support website or contact your retailer.

For assistance with product features or troubleshooting, you can also utilize the Huanlv App's support resources.

User Tips

  • Optimize Battery Life: While the Buds 3V offer up to 54 hours of total playback with the charging case, individual earbud playback is 12 hours. For extended use, remember to place them back in the case when not in use.
  • Personalize Your Sound: Don't forget to explore the Personalized EQ settings in the Huanlv App to tailor the audio to your preferences.
  • Gaming Advantage: Always activate Gaming Mode through the app when playing to benefit from the ultra-low 47ms latency for a competitive edge.
  • Stay Connected: Utilize the dual device connection feature to effortlessly switch between your phone and tablet without re-pairing.

Related Documents - Buds 3V

Preview OnePlus Earbuds Troubleshooting Guide
A comprehensive guide to troubleshooting common issues with OnePlus TWS and neckband earbuds, covering connection problems, sound issues, charging failures, and noise cancellation.
Preview OnePlus Buds Pro User Guide: Setup, Features, and Controls
Comprehensive guide to setting up, pairing, controlling, and charging your OnePlus Buds Pro wireless earbuds. Learn about noise cancellation, Zen Mode Air, and the HeyMelody app.
Preview OnePlus Buds Z User Manual: True Wireless Earbuds Guide
Comprehensive user manual for the OnePlus Buds Z true wireless earbuds, covering features, specifications, setup, usage, safety, and troubleshooting.
Preview OnePlus Buds Z2: Reviewer's Guide and Specifications
Explore the features of the OnePlus Buds Z2, including 40dB Active Noise Cancellation, high-quality sound with Dolby Atmos, refined design, water resistance, 38-hour battery life, seamless connectivity, and detailed specifications.
Preview OnePlus Buds Pro 2 User Manual: Features, Safety, and Warranty
Comprehensive user manual for OnePlus Buds Pro 2 wireless earbuds, covering setup, controls, noise cancellation, safety guidelines, warranty information, and material recycling details.
Preview OnePlus Buds Z User Guide: Setup, Features, and Troubleshooting
Comprehensive user guide for OnePlus Buds Z wireless earbuds, covering setup, pairing, controls, charging, app integration, and troubleshooting. Learn how to get the most out of your audio experience.