JIKONG 5 LED SOC Power Bar

Contents

JIKONG 5 LED SOC Power Bar User Manual

For use with JKBMS Systems

1. Introduction

The JIKONG 5 LED SOC Power Bar is an essential accessory designed to provide a clear and immediate visual indication of your battery's State of Charge (SOC) when used with JIKONG Battery Management Systems (JKBMS). This compact and easy-to-integrate unit helps users monitor their battery status at a glance, ensuring optimal performance and preventing unexpected power loss.

2. Product Features

  • Visual State of Charge (SOC) Indication: Five blue LEDs clearly display battery charge levels (20%, 40%, 60%, 80%, 100%).
  • Integrated Switch Key: Allows for manual activation of the SOC display.
  • Compact Design: Small form factor (15mm x 60mm) for easy integration.
  • Dedicated Connector: Designed for seamless connection to JKBMS units.
  • Durable Construction: Built for reliable performance in power management applications.

3. Specifications

AttributeValue
Brand NameJIKONG
TypeLIFEPO4 Battery BMS
Handware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Charge and Discharge PortCommon Port BMS
Charging Current10A
Usage ScenarioPower BMS
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
CertificationCE
Dimensions (approx.)15mm (width) x 60mm (length)
Cable Length (approx.)50cm

4. Package Contents

Please check the package for the following items:

  • 1 x JIKONG 5 LED SOC Power Bar
  • 1 x Connecting Cable (approx. 50cm)

If any items are missing or damaged, please contact your vendor.

5. Setup and Installation

  1. Identify the Connection Port: Locate the dedicated connection port on your JKBMS unit. This port is typically labeled for external display or communication.
  2. Connect the Cable: Carefully insert one end of the provided 50cm connecting cable into the connector on the JIKONG 5 LED SOC Power Bar. Ensure it is securely seated.
  3. Connect to JKBMS: Connect the other end of the cable to the corresponding port on your JKBMS unit. Ensure the orientation is correct to avoid damage.
  4. Mounting (Optional): The power bar has mounting holes. You can secure it to a suitable surface using appropriate fasteners (not included) for a stable installation.
Connection diagram showing the JIKONG 5 LED SOC Power Bar connected to a JKBMS unit via a 50cm cable.
Figure 1: Connection diagram of the JIKONG 5 LED SOC Power Bar to a JKBMS unit. The cable length is approximately 50cm.
Back view of the JIKONG 5 LED SOC Power Bar, showing the PCB and the connector with a black connecting cable.
Figure 2: Rear view of the SOC Power Bar with its connector and cable.

6. Operation

Once connected to a powered JKBMS, the JIKONG 5 LED SOC Power Bar will display the battery's State of Charge (SOC) using its five blue LEDs.

  1. Activating the Display: Press the 'Switch key' button located on the front of the power bar to activate the LED display. The LEDs will illuminate to indicate the current charge level.
  2. Reading the SOC: Each illuminated blue LED represents a specific percentage of charge:
    • 1 LED: 20%
    • 2 LEDs: 40%
    • 3 LEDs: 60%
    • 4 LEDs: 80%
    • 5 LEDs: 100%
Diagram illustrating the dimensions (15mm width, 60mm length) and the function of the 5 LEDs as State of Charge (SOC) indicators (20%, 40%, 60%, 80%, 100%) and the 'Switch key'.
Figure 3: Front view diagram showing the dimensions, switch key, and SOC indication levels of the 5 LEDs.
Front view of the JIKONG 5 LED SOC Power Bar, showing the switch and five blue LED indicators.
Figure 4: Front view of the JIKONG 5 LED SOC Power Bar.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the power bar. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the connecting cable for any signs of wear or damage. Ensure the connector remains secure.
  • Storage: If storing the power bar separately, keep it in a dry, cool environment away from direct sunlight and extreme temperatures.

8. Troubleshooting

If the JIKONG 5 LED SOC Power Bar is not functioning as expected, consider the following:

  • No LED Indication:
    - Ensure the power bar is correctly and securely connected to the JKBMS.
    - Verify that the JKBMS itself is powered on and functioning correctly.
    - Press the 'Switch key' to activate the display.
  • Incorrect SOC Reading:
    - Confirm that your JKBMS is properly calibrated for your battery type (LiFePO4).
    - Check the JKBMS settings for any display-related configurations.
  • Physical Damage: If there is visible damage to the power bar or cable, discontinue use and contact support.

For persistent issues, refer to your JKBMS manual or contact JIKONG technical support.

9. Warranty and Support

JIKONG products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your JKBMS or visit the official JIKONG website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.