MCHOSE G75 V2

Contents

MCHOSE G75 V2 Mechanical Keyboard User Manual

Model: G75 V2 | Brand: MCHOSE

Introduction

Thank you for choosing the MCHOSE G75 V2 Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new keyboard. The G75 V2 is a versatile 82-key mechanical keyboard featuring tri-mode connectivity (2.4GHz wireless, Bluetooth, and wired USB-C), RGB backlighting, a 10000mAh battery, and hot-swappable switches for a customizable typing experience.

MCHOSE G75 V2 Keyboard lineup in various colors

Image: MCHOSE G75 V2 Keyboard lineup showcasing different color options.

Package Contents

Please check the package for the following items:

  • MCHOSE G75 V2 Mechanical Keyboard
  • Keycap puller x1
  • Corresponding version replacement switches x2
  • Dust cover x1
  • Data cable x1 (USB-C to USB-A)
  • Certificate of compliance x1

Setup and Connection

The MCHOSE G75 V2 supports three connection modes: 2.4GHz wireless, USB wired, and Bluetooth wireless.

Mode Switch

Locate the mode switch on the keyboard. The symbols indicate the following modes:

  • 【】: 2.4GHz wireless mode
  • []: USB wired mode
  • [B]: Bluetooth wireless mode
Keyboard showing tri-mode switch and USB dongle storage

Image: Side view of the keyboard highlighting the tri-mode switch and the hidden 2.4G dust-proof storage compartment for the USB receiver.

2.4GHz Wireless Connection

  1. Switch the toggle on the keyboard to the 【】 position to enter 2.4GHz mode.
  2. Open the nameplate cover behind the keyboard and take out the USB dongle from its slot.
  3. Insert the USB dongle into an available USB port on your computer.
  4. The keyboard is now ready for use.

Manual Pairing (if needed):

  • Switch the toggle to the 【】 position.
  • Press and hold [FN + *~]. The indicator of the Q key will quickly flash to enter pairing mode.
  • Ensure the keyboard is in 2.4G pairing mode before inserting the USB receiver into the computer. Keep the keyboard close to the receiver during pairing.

USB Wired Connection

  1. Switch the toggle on the keyboard to the [] position to enter wired mode.
  2. Connect the provided USB-C cable to the Type-C port on the keyboard.
  3. Connect the other end of the cable (USB-A) to an available USB port on your computer.
  4. The keyboard is ready to use.

Bluetooth Wireless Connection

The keyboard supports up to three Bluetooth devices.

  1. Switch the toggle on the keyboard to the [B] position to enter Bluetooth mode.
  2. To pair with Wireless Channel 1, press and hold [FN + 1!] for approximately 3 seconds until the backlight flashes quickly. This activates Bluetooth pairing mode.
  3. On your device (computer, tablet, phone), search for Bluetooth devices and select [MCHOSE G75] to connect. The wireless indicator light will return to normal after successful pairing.
  4. To pair with Wireless Channel 2, press and hold [FN + 2@] for approximately 3 seconds.
  5. To pair with Wireless Channel 3, press and hold [FN + 3#] for approximately 3 seconds.
  6. To switch between paired Bluetooth devices, simply press [Fn + 1!], [Fn + 2@], or [Fn + 3#].

Keyboard Polling Rate

  • Wired Mode: 1000Hz
  • 2.4GHz Mode: 1000Hz
  • Bluetooth Mode: 125Hz

Operating Instructions

Volume Control Knob

The MCHOSE G75 V2 features a convenient volume control knob for easy audio adjustment at your fingertips. It also includes a one-key wake-up and one-key mute function.

Hand using the volume control knob on the keyboard

Image: A hand demonstrating the use of the volume control knob, which also supports one-key wake-up and mute.

Power Display

In 2.4GHz or Bluetooth wireless mode (when the USB dongle is not plugged in), press [FN + B] to display the current battery status.

F-Zone Functions (Windows System)

The F1-F12 keys have dual functions. They can be used as standard F-keys or as multimedia/system control keys when combined with the Fn key.

Key Single Press Function FN Combination Function
F1Screen brightness-Screen brightness-
F2Screen brightness+Screen brightness+
F3Switch windowSwitch window
F4Open ExplorerOpen Explorer
F5HomeHome
F6EmailEmail
F7Previous songPrevious song
F8Play / PausePlay / Pause
F9Next songNext song
F10MuteMute
F11Volume-Volume-
F12Volume+Volume+

F-Zone Functions (Mac System)

When switched to Mac System, the functions of the WIN key and Left ALT key are interchanged. F1-F12 keys will function as multimedia keys by default.

Key Single Press Function FN Combination Function
F1Screen brightness-Screen brightness-
F2Screen brightness+Screen brightness+
F3Switch windowSwitch window
F4Back to desktopBack to desktop
F5Press and hold call out SIRIPress and hold call out SIRI
F6ScreenshotScreenshot
F7Previous songPrevious song
F8Play / PausePlay / Pause
F9Next songNext song
F10MuteMute
F11Volume-Volume-
F12Volume+Volume+

FN Key Combination Functions

  • Fn + Esc: Reset (Hold for 3 seconds)
  • Fn + Win: Lock/Unlock the Win key. In Windows systems, the indicator light remains lit when the Win key is locked, and the Win key becomes inactive.
  • Fn + 1!: Wireless Channel 1. Press to switch channels, press and hold for 3 seconds to enter pairing mode.
  • Fn + 2@: Wireless Channel 2. Press to switch channels, press and hold for 3 seconds to enter pairing mode.
  • Fn + 3#: Wireless Channel 3. Press to switch channels, press and hold for 3 seconds to enter pairing mode.
  • Fn + \: Switch between 17 different backlight effects.
  • Fn + ↑: Increase backlight brightness.
  • Fn + ↓: Decrease backlight brightness.
  • Fn + ←: Decrease backlight speed.
  • Fn + →: Increase backlight speed.
  • Fn + Prtsc: Switch backlight color.
  • Fn + Scroll Lock: Switch backlight mode.
  • Fn + Pause: Lock/Unlock Win key.
  • Fn + B: Press and hold to check battery level.

Backlight Effects

Your keyboard features approximately 16 million colors (RGB) for backlighting. You can cycle through 17 different backlight effects by pressing [FN + \]. Further customization of backlights is available through the dedicated driver software.

MHUB Software

The MCHOSE G75 V2 is supported by the fully self-developed MHUB driver software, available in both web and client versions. MHUB allows for advanced customization, including Divine Light Synchronization, Music Rhythm 2.0, and GIF lighting effects.

MHUB software interface showing keyboard, mouse, and headphones

Image: MHUB software interface demonstrating multi-device light synchronization and customization options.

Charging and Battery

Charging Instructions

The MCHOSE G75 V2 is equipped with a 10000mAh super long-life battery, providing all-day, non-stop performance for gaming and office use. It also features NTC Temperature Control Black Technology for extended battery life.

10000mAh battery life graphic with NTC Temperature Control

Image: Graphic illustrating the 10000mAh super long battery life and NTC Temperature Control technology.

To charge the keyboard, connect it to your computer using the provided USB-C cable. During the charging process, the [ESC] key light will remain lit. Once fully charged, the keyboard's backlight will return to its normal effect. If the [ESC] key flashes red, please charge the keyboard promptly.

Important: This product does not support fast charging.

Charging instructions warning against fast charging

Image: Charging instructions emphasizing 'No Fast Charging'.

For optimal battery health and safety, please follow these guidelines:

  • It is recommended to charge the device only via a computer's built-in USB port.
  • Do not charge the device using a fast-charging mobile phone charger.
  • Do not charge the device with low-quality non-standard power adapters.
  • Do not charge the device with over-voltage or over-current power adapters.
  • Keep the keyboard away from high-temperature devices while charging.
  • If the device will not be used for an extended period, please turn off the power switch.

Power Saving Mode

  • In 2.4GHz wireless mode, the keyboard backlight will turn off after 1 minute of inactivity.
  • The keyboard will disconnect from 2.4GHz/Bluetooth mode after 30 minutes of inactivity. Press any key to reactivate it.

Maintenance

To ensure the longevity and optimal performance of your MCHOSE G75 V2 keyboard, please observe the following maintenance tips:

  • Keep the keyboard clean by regularly dusting it with a soft brush or compressed air.
  • Avoid exposing the keyboard to liquids or excessive moisture.
  • Do not expose the keyboard to extreme temperatures, especially high heat, as this can damage the battery and internal components.
  • When not in use for extended periods, turn off the keyboard's power switch to conserve battery life.
  • Use only the provided USB-C cable for charging, or a standard USB port on a computer. Avoid non-compliant power adapters.
  • The keyboard features full-key hot-swappable switches, allowing for easy customization and replacement of switches without soldering.
Close-up of hot-swappable keyboard switches

Image: Close-up view of the keyboard demonstrating full-key hot-swap capability for free customization.

Troubleshooting

If you encounter issues with your MCHOSE G75 V2 keyboard, please refer to the following common problems and solutions:

Common "Non-Human Quality Problems"

These issues are typically covered under warranty if they occur under normal usage conditions:

  • Keypad unresponsive during normal input.
  • Device reboots or disconnects automatically when idle.
  • Device not recognized after successful connection.

Issues Not Covered by Warranty (Man-Made Damage)

The following conditions are considered man-made damage and are not covered by the free warranty:

  • Visible drop damage.
  • Liquid ingress corrosion.
  • Burning.
  • Unauthorized disassembly or modification.
  • Malfunctions caused by non-original or incompatible accessories.
  • Abnormalities caused by third-party firmware, drivers, or illegal system modification.

In cases of man-made damage, repair or replacement services may be available for a fee after an inspection.

Specifications

Feature Specification (G75 V2)
Product ModelG75 V2
Connectivity3-Mode Connection (2.4G Wireless / Bluetooth / Type-C Wired)
Keyboard Standard82 Key
Layout75% distribution
Axis (Switches)Ice Blue Switch (Linear Shaft - Huan Nuo)
Key Cap HeightOriginal factory
Key Cap ProcessPBT Two-Color Injection
StructureGasket structure (5-Layer Sound-Dampening Gasket with Filling Structure)
Internal FillSandwich Cotton + IXPE Axle Lower Pad + PET Sound-Absorbing Pad + Bottom Cotton + Silicone Bottom Pad
Structural ComponentsGrooved PC Positioning Plate, 1.2mm Single Key Slotted, Fog-transparent PC positioning plate with horizontal slots, 2mm single-key slot
Transmission TechnologyMCHOSE TOPSPEED Wireless Technology
Battery Capacity10000mAh
FunctionVolume control knob, battery color-changing breathing light
DriverMaicong fully self-developed driver MHUB (web version/client)
Lamp PositionLower Light
BacklightApproximately 16,000,000 Colors (RGB)
System SupportWindows / macOS
Charging InterfaceType-C
Charging Voltage/CurrentDC 5V 1.5A
ApplicationDesktop, Laptop
Operation StyleMechanical
LanguageEnglish
CertificationCE

Switch Specifications

The G75 V2 is available with different premium switches, offering a smooth feel and sensitive actuation.

Ice Blue Switch (Linear Shaft - Huan Nuo)

  • POM core, PC top cover, nylon base.
  • Smooth feel, sensitive actuation, fast rebound.
  • Trigger Pressure: 35±8gf
  • Trigger Stroke: 2.0±0.4mm
  • Total Travel: 3.6±0.4mm

Matcha Latte Switch V2 (Linear Shaft - Huan Nuo)

  • POM spindle pre-bottoming with integrated light guide pillar for concentrated feel.
  • Trigger Pressure: 45±8gf
  • Trigger Stroke: 2.0±0.4mm
  • Total Travel: 3.6±0.2mm
Diagram showing specifications for Ice Blue Switch and Matcha Latte Switch V2

Image: Detailed specifications for Ice Blue Switch and Matcha Latte Switch V2.

Keyboard Structure

The G75 V2 features a 5-layer sound-dampening gasket with a filling structure for enhanced typing feel and acoustics.

Exploded view diagram of the 5-layer sound-dampening gasket structure

Image: Exploded view diagram illustrating the 5-layer sound-dampening gasket structure, including PBT Key Cap, Shell, Axis, Fog-Permeable PC Positioning Plate, Sandwich cotton, IXPE Switch Bottom Pad, PET voice coil pad, 1.2mm Single Key Slotted, Bottom Cotton, Silicone base pad, and Bottom shell.

Keycap Styles

The keyboard may ship with one of two official genuine keycap character styles.

Two different keycap styles for the keyboard

Image: Comparison of two random keycap styles that may be shipped with the product.

Warranty and Support

Warranty Information

Your MCHOSE G75 V2 keyboard comes with a warranty covering product performance failures under normal usage conditions. Please retain your purchase certificate (order number, electronic invoice, or transaction screenshot) as it is required for after-sales service.

  • Warranty Coverage: Covers product performance failures.
  • Exclusions: Apparent damages like scratches, paint chipping, keycap shine, or minor cracks that do not affect functionality are not covered by the free warranty. Man-made damages (e.g., visible drop damage, liquid ingress, unauthorized modification) are also excluded.
  • After-Warranty Service: If your product is out of warranty, you can still contact after-sales for inspection and repair. Product condition will be evaluated, and repair/replacement options will be offered with associated costs.
  • Warranty for Replaced/Repaired Products: Products repaired or with parts replaced by after-sales will have a unified warranty period of no less than 90 days. If the remaining original warranty is less than 90 days, it will be extended to 90 days. If the remaining original warranty exceeds 90 days, the original warranty duration continues.

For any quality issues within the warranty period, please contact customer support and provide your warranty card or purchase certificate for comprehensive after-sales service.

FCC Compliance Statement

This device has been tested and complies with the limits for Class B digital devices under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device does cause harmful interference to radio or television reception (which can be determined by turning the device off and on), the user is encouraged to try one or more of the following measures to correct the interference:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Additional Resources

A detailed user manual (PDF) is available for download. Please refer to the official product page or contact customer support for the direct link.

© MCHOSE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.