Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your ATK Blazing Sky Series Gaming Mouse 8K Dongle. This high-performance wireless receiver is designed to provide an ultra-low latency connection for compatible ATK gaming mice, enhancing your e-sports experience with an 8000Hz polling rate.
Compatibility
The ATK 8K Wireless Dongle is specifically designed for certain ATK gaming mouse models to achieve optimal performance. Please verify your mouse model against the lists below:
Compatible Models:
- ATK Rayquaza Series: X1 Pro, X1 PROMAX, X1 ULTRA, X1 ULTIMATE
- ATK Rayquaza Series: Z1 Series
- ATK Dragonfly: A9 Ultra
- Liekong Series: F1, X1, Z1
Incompatible Models (Not Applicable):
- X1 Standard
- X1 Master Star Flash
- F1 Leviathan
- F1 Explorer
- F1 Master versions
Setup Instructions
- Unpack the Dongle: Carefully remove the 8K Wireless Dongle from its packaging.
- Connect to PC: Insert the USB connector of the 8K Dongle into an available USB port on your computer. For best performance, use a direct USB port on your motherboard rather than a USB hub.
- Automatic Recognition: Your computer should automatically detect and install the necessary drivers for the dongle. This process may take a few moments.
- Pairing with Mouse:
- Ensure your compatible ATK gaming mouse is powered on and in wireless mode.
- The dongle and mouse should automatically pair. If pairing does not occur, refer to your specific ATK gaming mouse's manual for its pairing procedure, which may involve pressing a button on the mouse or using its software.
- Software Installation (Optional): For advanced customization and to verify the 8000Hz polling rate, download and install the official ATK software for your gaming mouse from the manufacturer's website.
Operating the 8K Dongle
Once successfully set up, the 8K Dongle operates seamlessly in the background, providing a high-speed wireless connection for your compatible ATK gaming mouse.
- 8000Hz Polling Rate: The dongle enables your mouse to report its position and clicks to your computer 8000 times per second, significantly reducing input lag compared to standard polling rates.
- Ultra-Low Latency: Experience an average key delay of 0.3993ms, with a minimum of 0.27ms, thanks to the advanced hardware support including optical microswitches, Nordic chips, and ATK JueSha professional competitive firmware.
- Stable 2.4G Wireless: The dongle utilizes a robust 2.4GHz wireless frequency for a stable and interference-resistant connection.
Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe the dongle if it becomes dusty. Avoid using liquid cleaners or abrasive materials.
- Storage: When not in use, store the dongle in a cool, dry place away from direct sunlight and extreme temperatures.
- Physical Care: Avoid dropping the dongle or subjecting it to strong impacts, as this can damage internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dongle not recognized by PC | Loose connection, faulty USB port, driver issue. | Try a different USB port. Restart your computer. Ensure the dongle is fully inserted. |
| Mouse not connecting to dongle | Mouse is incompatible, mouse is out of range, pairing issue. | Verify mouse compatibility (see Compatibility section). Ensure mouse is within close proximity to the dongle. Refer to your mouse's manual for specific pairing instructions. |
| High latency or unstable connection | Interference, dongle too far from mouse, outdated mouse firmware. | Move the dongle closer to the mouse (e.g., using a USB extension cable). Ensure no other 2.4GHz devices are causing interference. Update your mouse's firmware via the ATK software. |
Specifications
- Product Type: 8K Wireless Dongle / Receiver
- Connectivity: 2.4GHz Wireless
- Polling Rate: 8000Hz
- Average Key Delay: 0.3993ms (measured)
- Minimum Key Delay: 0.27ms
- Dimensions: 44mm x 57mm x 20mm (Receiver)
- Brand Name (as per product properties): BITCED
- Origin: Mainland China
User Tips
- Verify Compatibility: Always double-check the compatibility list before purchasing or attempting to use the dongle with your mouse. Some models, even within the same series, may not be supported.
- Optimal Placement: For the most stable connection and lowest latency, place the dongle as close as possible to your gaming mouse, ideally on your desk and unobstructed.
- Firmware Updates: Regularly check for and install firmware updates for your ATK gaming mouse, as these often include performance improvements and bug fixes that can affect dongle performance.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official ATK website or contact your retailer. Keep your proof of purchase for warranty claims.
