JIKONG JKBMS Smart External BMS

Contents

JIKONG JKBMS Smart External BMS User Manual

Model: JKBMS Smart External BMS (Supports 8S-24S Li-ion/LiFePo4/LTO Battery Packs)

1. Introduction

The JIKONG JKBMS Smart External BMS is an intelligent active balanced power management system designed for various battery applications, including power BMS, energy storage BMS, and 3C digital BMS. It supports 8S-24S series Li-ion, LiFePo4, and LTO battery types with a continuous charge/discharge current of up to 200A. This BMS features active balancing technology, a high-performance MCU, and a robust all-aluminum alloy shell for efficient heat dissipation and durability. It offers comprehensive protection functions including overcharge, over-discharge, overcurrent, and short circuit protection.

JIKONG intelligent active balanced power management system (BMS) with app interface and key features
Figure 1: JIKONG Intelligent Active Balanced Power Management System (BMS) Overview. Key features include five major interfaces (RS485/CAN/GPS/Display/Heat), multi-interface display, high-performance MCU, full aluminum alloy shell, continuous current (100A-200A), and instantaneous current (200A-350A).

2. Setup

2.1. Packing List

Please verify that all components are present in the package:

  • BMS x 1
  • Screw x 4
  • NTC (Temperature Sensor) x 2 (40cm long)
  • Sampling line x 1 (70cm long)
  • Switch key x 1
Packing list for JIKONG BMS showing the BMS unit, four screws, two NTC cables, and one sampling line.
Figure 2: Contents of the JIKONG JKBMS package.

2.2. Interface Description

The JKBMS features a rich set of interfaces to meet various daily needs and communication modes. These include:

  • Communication: CAN, RS485, Bluetooth (BT)
  • Sensors: NTC (Temperature)
  • Control: Soft Switch, Key Switch
  • Indicators: SOC Indicator
  • Balancing: Active Equalizer
  • Optional Ports: Parallel, GPS, CANBUS RS485, Heat
  • Standard Ports: Display, Sampling Port
Diagram of the JIKONG BMS interfaces including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer, GPS, CANBUS RS485, Display, Sampling Port, and Heat ports.
Figure 3: Overview of JKBMS interfaces and their functions.

2.3. Wiring Instructions

Proper wiring is critical for the safe and correct operation of the BMS. Follow these general steps and refer to the specific diagrams for your battery configuration:

  1. Connect all individual cell balance wires (sampling lines) to the BMS. Ensure correct polarity and sequence.
  2. Insert the main sampling cable into the designated port on the BMS.
  3. Connect the main B- (negative) line from the battery pack to the B- terminal on the BMS.
  4. Connect the main P- (negative) line from the BMS to the load/charger negative terminal.
  5. Connect the main P+ (positive) line from the battery pack to the load/charger positive terminal.
  6. If applicable, connect the heater, inverter, and charger as shown in the diagrams.

2.3.1. Wiring for 8-String Cells

Wiring diagram for an 8-string battery cell configuration with the JIKONG BMS, showing connections for P+, B-, P-, heater, inverter, and charger.
Figure 4: Wiring diagram for an 8-string cell battery pack.

2.3.2. Wiring for 24-String Cells

Wiring diagram for a 24-string battery cell configuration with the JIKONG BMS, showing connections for P+, B-, P-, heater, inverter, and charger.
Figure 5: Wiring diagram for a 24-string cell battery pack.

3. Operating Instructions

3.1. Active Balancing Technology

The JKBMS utilizes intelligent active balancing technology to optimize battery performance and lifespan. Active balancing transfers energy from cells with higher voltage to those with lower voltage, minimizing energy loss and heat generation. This process operates continuously during charging, discharging, or idle states until the voltage difference between cells is within the set range. This method is highly effective for larger capacity battery packs due to its ability to handle larger currents (typically 0.6A-2A) without affecting cooling.

Diagram illustrating active balancing technology, showing energy transfer between battery cells to achieve balance.
Figure 6: Explanation of intelligent active balancing technology.

3.2. Intelligent Interaction and Monitoring

The JKBMS offers intelligent interaction through its dedicated app (compatible with iOS, Android, and HarmonyOS) and an optional external display. This allows users to:

  • Freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance parameters.
  • View real-time information including voltage, current, temperature, and the number of strings with a single click.

To adjust parameters, first read the internal parameters of the protection board via the app or display, and then make the desired changes.

Images showing the JIKONG BMS app interface on a computer monitor and an external display unit showing battery status (voltage, current, SOC).
Figure 7: Intelligent interaction via app and external display.

4. Maintenance

4.1. Physical Protection and Heat Dissipation

The JKBMS is designed with a fully enclosed aluminum alloy shell, providing effective dustproof, waterproof, and anti-vibration properties. This reduces damage from external environments and protects internal electronic components. The all-aluminum alloy shell also ensures superior heat dissipation, which is crucial for the longevity and performance of the BMS, especially during high current operations.

Image demonstrating the dustproof and waterproof capabilities of the JIKONG BMS, with water splashing on the unit.
Figure 8: Dustproof, waterproof, and anti-vibration design.
Exploded view of the JIKONG BMS showing the cooling aluminum alloy casing, low internal resistance MOS, flexible wiring terminals, and Jikong High performance MCU.
Figure 9: Internal structure highlighting cooling aluminum alloy and high-performance components.

4.2. General Care

  • Keep the BMS clean and free from debris.
  • Ensure proper ventilation around the unit if installed in an enclosure.
  • Regularly check all wiring connections for tightness and corrosion.
  • Avoid exposing the BMS to extreme temperatures or direct sunlight for prolonged periods.

5. Troubleshooting

If you encounter issues with your JIKONG JKBMS, consider the following common troubleshooting steps:

  • No Power/No Display: Check all power connections, ensure the battery pack is charged, and verify the switch key is in the ON position.
  • BMS Not Balancing: Confirm that the sampling lines are correctly connected to each cell. Check the balancing current settings in the app. Active balancing occurs when cell voltage differences exceed a set threshold.
  • Over-Voltage/Under-Voltage Protection Triggered: This indicates a cell voltage outside the safe operating range. Check individual cell voltages using the app. Ensure your charger and load are compatible with your battery pack's voltage limits.
  • Overcurrent/Short Circuit Protection Triggered: This means the current draw exceeded the BMS's limit or a short circuit occurred. Disconnect the load immediately and inspect for any short circuits in your system. Reduce the load if it consistently triggers overcurrent protection.
  • Temperature Protection Triggered: The NTC sensors detected an abnormal temperature. Ensure the BMS and battery are in a well-ventilated area and not exposed to excessive heat or cold.
  • Communication Issues (Bluetooth/RS485/CAN): Ensure the app is updated and Bluetooth is enabled on your device. Check physical connections for RS485/CAN. Restart the BMS and your device.

For persistent issues, refer to the detailed specifications and wiring diagrams, or contact JIKONG customer support.

6. Specifications

The JIKONG JKBMS Smart External BMS offers various models with specific configurations. Below is a summary of key parameters. For detailed specifications of specific models, please refer to the comprehensive product parameters table.

6.1. General Specifications

  • Brand Name: JIKONG
  • Type: LIFEPO4 Battery BMS (also supports Li-ion, LTO)
  • Handware or Smart: SMART BMS
  • Balance Function: Active Balanced BMS
  • Charging Current: Up to 200A (Continuous)
  • Charge and Discharge Port: Common Port BMS
  • Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
  • Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
  • Certification: CE
  • Origin: Mainland China

6.2. Detailed Product Parameters

The following table provides detailed technical indices for various JIKONG BMS models. Note: Data tolerance range is ±2mm.

Detailed product parameters table for JIKONG BMS models including JK-WBD6A24S15P, JK-WB1A8S15P, JK-WBD6A24S12PHCR, JK-WBD6A20S20P, JK-WBD6A20S20PH. Parameters include Number of Battery Strings, Balance Method, Balance Current, Conductive Resistance, Continuous Charge/Discharge Current, Maximum Instantaneous Current, Other Interfaces, Wiring Output, Supply Voltage, Single Cell Voltage Range, Voltage Acquisition Accuracy, Over Charge/Discharge Protection/Release Voltage, Overcurrent Defend Delay, Short Circuit Protection, Coulomb Counter, and Bluetooth Function.
Figure 10: Comprehensive Product Parameters Table.

6.3. Dimensions

Dimensions vary slightly by model. Below are examples for common models:

6.3.1. Models JK-WBD6A24S15P, JK-WBD6A24S12P, JK-WBD6A20S20P

Dimensions for JIKONG BMS models JK-WBD6A24S15P, JK-WBD6A24S12P, JK-WBD6A20S20P, showing front and side views with measurements like 169mm height, 106mm width, 18.1mm thickness.
Figure 11: Dimensions for JK-WBD6A24S15P, JK-WBD6A24S12P, JK-WBD6A20S20P.

6.3.2. Model JK-WB1A8S15P

Dimensions for JIKONG BMS model JK-WB1A8S15P, showing front and side views with measurements like 207mm height, 113mm width, 18.1mm thickness.
Figure 12: Dimensions for JK-WB1A8S15P.

7. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the JIKONG Official Store where you purchased the product. Ensure you have your purchase details and product model information ready for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.