DSPIAE ES-A PRO

Contents

DSPIAE ES-A PRO Reciprocating Electric Sander Instruction Manual

Model: ES-A PRO

Ultra Fine Operation, High Efficiency Sanding

1. Introduction

The DSPIAE ES-A PRO "Illusive Shadow" Reciprocating Electric Sander is an advanced tool designed for precision sanding and polishing in model making. It features an optimized motor, gear, and drive train for high efficiency and low vibration, offering a sanding action that mimics human hand movement. This manual provides detailed instructions for the safe and effective use of your ES-A PRO sander.

DSPIAE ES-A PRO Reciprocating Electric Sander
The DSPIAE ES-A PRO "Illusive Shadow" Reciprocating Electric Sander.

2. Package Contents

Please check the package to ensure all items are present:

  • Reciprocating Electric Sander × 1
  • Sanding Head × 8 (Nylon)
  • Dedicated Silicon Sandpaper Pack (8 shapes, 7 grits, 3 pcs each)
  • Power Cord (Type-C) × 1
  • Storage Box × 1 (Aluminum alloy)
Package contents of DSPIAE ES-A PRO sander
All items included in the DSPIAE ES-A PRO package.

3. Setup

Before using your DSPIAE ES-A PRO sander, follow these steps:

  1. Select Sandpaper: Choose the appropriate grit and shape of silicon sandpaper for your task.
  2. Attach Sandpaper: Securely stick the selected sandpaper onto one of the 8 sanding heads.
  3. Insert Sanding Head: Fit the prepared sanding head onto the sander. Ensure it is fully inserted and secure.
Diagram showing how to attach sandpaper and sanding head to the sander
Instructions for attaching sandpaper and sanding head.

4. Operating Instructions

Power On/Off and Speed Control:

  1. Power On (First Gear): While the sander is powered off, click the function key once. The sander will start at the first gear sanding speed.
  2. Second Gear: Click the function key twice within three seconds to switch to the second gear.
  3. Third Gear: Click the function key again within three seconds to reach the third gear.
  4. Power Off: If the sander is running in any gear for more than three seconds, a single click on the function key will turn the sander off.

Lighting Control:

  • The default setting for the lighting system is "off".
  • While the sander is powered off, double-click the function key to turn the lighting system on.
  • The default setting of the lighting system in 1st, 2nd, and 3rd gear is "on". Double-click the function key to turn it off.

Dual Operation Modes:

The ES-A PRO features a dual operation mode, allowing you to use it unplugged or while charging. This ensures continuous operation for extended tasks.

Product demonstration video showing assembly, operation, and features like dual mode and low vibration.

5. Interchangeable Sanding Heads

The ES-A PRO comes with 8 types of quick-release, durable, and corrosion-resistant nylon sanding bits. These are designed for various sanding scenarios and feature a plug-and-play design for quick replacement.

  • Sledge Sanding Head
  • Square Sanding Head
  • Triangular Sanding Head
  • Rectangular Sanding Head
  • Slim Sanding Head
  • Spherical Sanding Head
  • Right Angle Sanding Head
  • Arc Sanding Head
Eight types of quick-release interchangeable sanding bits
The 8 types of quick-release interchangeable sanding bits and their applications.

6. Dedicated Silicon Sandpaper

The dedicated silicon sandpaper packs are designed specifically for the "Illusive Shadow" sander. The abrasive layer utilizes a fabric-like soft membrane material, providing an excellent balance between flexibility and stretchiness, with superior durability and cutting efficiency. The silicon adhesive backing ensures ample stiffness, support, and stickiness, allowing the sandpaper to conform better to sanding surfaces for a more thorough grinding action.

Available grits include #180, #280, #400, #600, #800, #1000, and #1200, each in 8 different shapes.

Various grits and shapes of silicon sandpaper packs
Overview of available silicon sandpaper grits and shapes.

7. Charging Instructions

The ES-A PRO features a direct connection charging module. It can be operated while charging, providing unlimited battery life for continuous work. The battery capacity is 280mAh, and a full charge takes approximately 25 ± 3 minutes, providing about 80 ± 5 minutes of work duration without load.

  • Use a charging device rated 5V3A or below. This product does not support quick charge protocols.
  • Connect the provided Type-C power cord to the charging port on the sander and a suitable power source.
  • The charging indicator will show the charging status.
Close-up of the direct connection charging module with USB-C cable
Direct connection charging module in use. Note: Use 5V3A or below charger.

8. Maintenance and Storage

To ensure the longevity and optimal performance of your ES-A PRO sander:

  • Cleaning: After use, gently clean any dust or debris from the sanding head and the sander body.
  • Battery Care: If the sander will not be used for a long period, charge it properly every six months to prevent damage to the Lithium battery due to over-discharge.
  • Storage: Store the sander and its accessories in the provided aluminum alloy storage box. This protects the tool and keeps all components organized.
DSPIAE ES-A PRO sander and accessories stored in its case
The ES-A PRO sander and its components stored in the dedicated case.

9. Troubleshooting and Precautions

Common Issues:

  • Automatic Shut-off: If excessive pressure is detected on the sanding head, the sander will automatically shut off for protection. Reduce pressure and restart.
  • Motor Stall: Do not apply brutal force on the working sanding head, as the motor may stall when overloaded.

General Precautions:

  • Do not use this sander when the ambient temperature is above 40°C.
  • Keep out of reach of children under 14 years of age to avoid injury.
  • Avoid tapping or dropping this product, as it may cause damage or malfunction.
  • Do not cover or block this sander while it is under working condition to ensure proper heat dissipation.
  • This sander is designed for use with compact parts for precision sanding/polishing. Do not use it on large objects.

10. Specifications

FeatureSpecification
Name"Illusive Shadow" Reciprocating Electric Sander
ModelES-A PRO
Sanding Speed4100 / 4500 / 5400 rpm
Dimensions178 × 21 × 18 mm
Net Weight65 ± 1 g
Main MaterialNylon, Aluminum Alloy
Shell MaterialAluminum Alloy
Max Pressure350 / 420 / 480 g
Reciprocating Travel2.5 ± 0.1 mm
Horizontal Tolerance± 0.1 mm
Lateral Tolerance± 0.1 mm
Battery Capacity280 mAh
Charging Time25 ± 3 min
Work Duration (without load)80 ± 5 min
Rated Power3.5 W
Load Output910 mA MAX
No-load Output330 mA MAX
Detailed specifications table comparing Illusive Shadow and Illusive Shadow PRO
Detailed specifications for the ES-A PRO model.

11. User Tips

  • The sander provides a very smooth grinding action, making it effective for cleaning plastic runners and other model parts.
  • The silicone sandpaper is highly regarded for its quality and feel.
  • This tool is particularly useful for model makers and hobbyists seeking precision sanding.
  • Remember that additional dedicated silicon sandpaper refills can be purchased separately if needed.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the manufacturer's official website or contact your retailer. Keep your purchase receipt as proof of purchase.

© 2023 DSPIAE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.