Sluban M38-B1185

Contents

Sluban Snow Phantom Mechanical Armor Series Robot Building Blocks

Model: M38-B1185

Introduction

Thank you for choosing the Sluban Snow Phantom Mechanical Armor Series Robot Building Blocks. This manual provides detailed instructions for assembling, operating, and maintaining your model. Please read it carefully before beginning assembly to ensure a smooth and enjoyable building experience.

Sluban Snow Phantom Mechanical Armor Robot

Image: The fully assembled Snow Phantom Mechanical Armor Robot, ready for display.

Safety Information

  • Recommended Age: Suitable for ages 14+ years and 18+ years.
  • Material: Made from ABS plastic, which is non-toxic and complies with European and American toy safety standards, as well as GB standards.
  • Small Parts Warning: This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
  • Chemical Information: This product is reported to contain no high-concerned chemicals. However, please note the following:
  • California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Your package should contain the following:

  • 752 pieces of building blocks (Model: M38-B1185)
  • Instruction Manual
  • (Optional: Original Color Box, depending on purchase option)

Please verify all parts are present before beginning assembly. If any parts are missing, please refer to the "Troubleshooting" section.

Assembly Instructions

Follow the step-by-step diagrams provided in the included instruction manual to assemble your Snow Phantom Mechanical Armor Robot. Take your time and ensure each piece is securely connected.

  1. Preparation: Unpack all building blocks and organize them by type or color to facilitate assembly.
  2. Follow the Manual: Refer to the detailed, illustrated instructions provided in the physical manual. Each step will guide you through connecting the various components.
  3. Modular Assembly: The model is typically assembled in sections (e.g., legs, arms, torso, head, weapons). Complete each section before combining them.
  4. Weapon Assembly: Assemble the long rifle and any other accessories as per the manual.
  5. Final Touches: Attach any decorative elements or specialized parts, such as the cloak for "Wear Cloak Mode".
Sluban Snow Phantom Robot with Rifle

Image: The assembled robot holding its long rifle, showcasing its detailed design.

Sluban Snow Phantom Robot in dynamic pose

Image: The robot in a dynamic action pose, demonstrating articulation.

Operating Instructions

Once assembled, your Sluban Snow Phantom Mechanical Armor Robot is ready for display and imaginative play.

  • Articulation: The robot features multiple points of articulation, allowing for various poses. Gently adjust the limbs and joints to achieve desired stances.
  • Weapon Handling: The long rifle and other accessories can be held by the robot's hands. Ensure they are securely placed.
  • "Wear Cloak Mode": The model includes a cloak accessory that can be attached to create a "Snow Mirage" or "Wear Cloak Mode" appearance. Refer to the manual for specific attachment points.
Sluban Snow Phantom Robot in various poses and cloak mode

Image: The mecha displayed in different directions, including a view of the "Wear Cloak Mode".

Close-up of Snow Phantom Robot in Wear Cloak Mode

Image: A close-up view of the Snow Phantom in "Wear Cloak Mode" with the cloak accessory.

Care and Maintenance

  • Cleaning: To clean the model, gently wipe it with a dry, soft cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the assembled model or unbuilt blocks in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Disassembly: If disassembling the model, do so carefully to avoid damaging the connection points of the blocks.

Troubleshooting

Missing Parts:
If you find any quality problems or missing parts when you open the parcel, please do not open a dispute directly. It is better to contact the seller first. They will assist in solving the issue and can arrange for lost parts to be reissued.
Difficulty Assembling:
Ensure you are following the instruction manual step-by-step. Sometimes, a small piece might be oriented incorrectly, preventing subsequent steps. Double-check the diagrams carefully.
Loose Connections:
Ensure that each block is firmly pressed into place. If a connection remains loose, check if the correct pieces are being used as per the manual.

Specifications

FeatureDetail
Model NumberM38-B1185
Number of Pieces752 PCS
MaterialABS Plastic
Recommended Age14+ years, 18+ years
ThemeRobots
CertificationCE
High-concerned ChemicalNone
OriginMainland China
Assembled Dimensions (approx.)Height: 27.8 cm, Width: 15.7 cm
Package Dimensions (approx.)Length: 24 cm, Width: 19 cm, Height: 9 cm
Package Weight (approx.)0.594 kg
Dimensions of the Sluban Snow Phantom Robot

Image: Diagram showing the approximate height (27.8cm) and width (15.7cm) of the assembled B1185 model.

User Tips

  • Keep the Manual Safe: It is recommended to keep the physical instruction manual in a safe place, as it contains detailed assembly diagrams.
  • Organize Parts: Before starting assembly, sort the building blocks by color, size, or type. This can significantly speed up the building process and reduce frustration.
  • Check Connections: For a stable model, ensure all connections are firm. If a piece feels loose, re-examine the connection point and the surrounding blocks.

Warranty and Support

This product is designed for durability and enjoyment. In case of any issues:

  • Missing or Damaged Parts: If you encounter any missing or damaged parts upon opening the package, please contact the seller directly for assistance. They are equipped to help resolve such issues and can arrange for replacement parts if necessary.
  • General Inquiries: For any other questions or support regarding the product, please reach out to the seller through your purchase platform.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.