ARROWMAX AM-171040-LE

Contents

ARROWMAX AM-171040-LE Set-Up System for 1/10 Touring Cars

Model: AM-171040-LE

1. Introduction

The ARROWMAX AM-171040-LE Set-Up System is a precision tool designed for enthusiasts and professionals to accurately measure and adjust the chassis geometry of 1/10 scale touring cars. This limited edition system ensures optimal performance by allowing precise adjustments to camber, toe, and ride height. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your set-up system.

2. Package Contents

Please inspect the package contents carefully to ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.

  • Precision Acrylic Set-Up Boards (2 pcs)
  • Wheel Stands/Gauges (6 pcs)
  • Small Hardware (screws, nuts, bearings for assembly)
  • Limited Edition Carrying Bag (1 pc)
All components of the ARROWMAX AM-171040-LE Set-Up System laid out
Figure 2.1: All components included in the ARROWMAX AM-171040-LE Set-Up System.
Limited Edition Carrying Bag with components stored inside
Figure 2.2: The included carrying bag for convenient storage and transport.

3. Setup

Follow these steps to assemble and prepare your ARROWMAX Set-Up System for use:

  1. Unpack Components: Carefully remove all parts from the carrying bag.
  2. Assemble Wheel Stands: Attach the necessary small hardware (screws, nuts, bearings) to the wheel stands as indicated by the design. Ensure all connections are secure but do not overtighten.
  3. Position Set-Up Boards: Place the two clear acrylic set-up boards on a flat, level surface. These boards will serve as the base for your measurements.
  4. Mount Wheel Stands: Securely attach the assembled wheel stands to the designated positions on the set-up boards. The design allows for precise placement to accommodate the 1/10 touring car chassis.
  5. Verify Stability: Ensure the entire set-up system is stable and does not wobble. A stable base is crucial for accurate measurements.
Assembled ARROWMAX Set-Up System with clear acrylic boards and wheel stands
Figure 3.1: The ARROWMAX Set-Up System fully assembled and ready for use.

4. Operation

This set-up system is designed to help you achieve precise adjustments for your 1/10 touring car. Here are general guidelines for its operation:

  1. Place Car on System: Carefully place your 1/10 touring car onto the assembled set-up system, ensuring each wheel rests securely on its respective wheel stand.
  2. Level the Car: Ensure the car is level and settled on the stands. Gently press down on the chassis a few times to allow the suspension to settle.
  3. Measure Ride Height: Use a ride height gauge (not included) to measure the distance from the chassis to the ground at various points. Adjust your car's suspension as needed.
  4. Measure Camber: Utilize a camber gauge (not included) in conjunction with the set-up system to measure the vertical angle of the wheels. Adjust camber links to achieve desired settings.
  5. Measure Toe: Use a toe gauge (not included) to measure the angle of the wheels relative to the car's centerline. Adjust steering linkages to set the toe-in or toe-out.
  6. Repeat and Refine: After each adjustment, re-measure to confirm the changes. Repeat the process until all desired settings are achieved.

Note: Specific measurement tools (ride height gauge, camber gauge, toe gauge) are typically sold separately and are essential for utilizing this set-up system effectively.

5. Maintenance

Proper maintenance will prolong the life and accuracy of your ARROWMAX Set-Up System.

  • Cleaning: After each use, wipe down all components with a soft, dry cloth to remove dust and debris. For stubborn grime, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the system in its dedicated carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. This protects the acrylic boards from scratches and warping.
  • Inspection: Periodically check all screws and connections for tightness. Ensure the bearings in the wheel stands move freely.
  • Handling: Handle the acrylic boards with care to prevent scratches or cracks, which can affect measurement accuracy.

6. Troubleshooting

If you encounter issues with your set-up system, consider the following:

Inaccurate Measurements

  • Uneven Surface: Ensure the surface on which the set-up system is placed is perfectly flat and level.
  • Unsettled Suspension: Make sure the RC car's suspension has fully settled before taking measurements. Gently bounce the car a few times.
  • Damaged Components: Inspect the acrylic boards and wheel stands for any visible damage, scratches, or warping that could affect accuracy.
  • Loose Connections: Check that all wheel stand components are securely fastened.

Difficulty Placing Car

  • Incorrect Scale: Verify that your RC car is a 1/10 touring car, as the system is specifically designed for this scale.
  • Obstructions: Ensure no debris or foreign objects are preventing the car from sitting properly on the wheel stands.

7. Specifications

AttributeValue
BrandARROWMAX (also listed as GWOLVES)
Model NumberAM-171040-LE
Scale Compatibility1/10 Touring Cars
Main Material (Bag)Polyester
Recommended Age14+ years
Quantity1 set
Power SourceNot Electric, No Battery Required
CertificationCE
OriginMainland China
Intended UseVehicles & Remote Control Toys, Cars

8. User Tips

No specific user tips were available from reviews or Q&A for this product.

9. Warranty and Support

For any questions, technical assistance, or warranty claims regarding your ARROWMAX AM-171040-LE Set-Up System, please refer to the seller's contact information provided at the time of purchase. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.