Lishui Controller X098-AXC003A

Contents

Ebike Brushless Motor Controller X098-AXC003A User Manual

Brand: Lishui Controller | Model: X098-AXC003A

1. Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Lishui Controller X098-AXC003A Brushless Motor Controller. This controller is designed for electric bicycles, electric scooters, fat-tire bikes, and mountain bikes (MTB), and is specifically compatible with KDS protocol displays.

Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Specifications

FeatureSpecification
ModelX098-AXC003A
TypeController
Battery Voltage48V
Cutoff Voltage39V
Current Limit20A
Dimensions (L*W*H)119mm * 52mm * 32mm
Weight347g
Display Meter ProtocolKDS
OriginMainland China
Controller with dimensions 119mm x 52mm x 32mm

Figure 1: Controller dimensions (119mm x 52mm x 32mm).

3. Compatibility

  • Display Compatibility: This controller is exclusively compatible with KDS protocol display meters. It will not function with displays using other communication protocols.
  • Vehicle Types: Suitable for a wide range of electric vehicles including electric bicycles, electric scooters, fat-tire bikes, and mountain bikes (MTB).

Before purchasing or installing, it is crucial to verify that your display meter uses the KDS protocol. If unsure, please consult the seller or manufacturer with a photo of your current controller label for confirmation.

4. Installation and Wiring

The controller acts as the "brain" of your e-bike, managing power and processing signals from various components. Proper wiring is essential for safe and correct operation.

Ebike Brushless Motor Controller X098-AXC003A with all wires and connectors

Figure 2: Overview of the controller with its wiring harness.

Controller with various disconnected connectors laid out for identification

Figure 3: Various connectors of the controller.

Wiring Connections:

The controller features multiple connectors for integrating with your e-bike's components. While specific connector types may vary, the general connections are as follows:

  • Battery Connection: Connects the controller to the e-bike's battery for power supply. This is typically a robust connector designed for high current.
  • Motor Connection: Connects the controller to the brushless motor. This usually involves three phase wires and a smaller hall sensor wire bundle (though this model is hall-sensorless, so the hall sensor wires might be absent or unused).
  • Display Panel Connection: Connects to the KDS display meter. This cable transmits data for speed, battery level, PAS level, and other operational parameters.
  • Throttle Connection: Connects to the throttle for acceleration input.
  • Brake Lever Connections: Connects to the brake levers, typically providing a signal to cut motor power when brakes are applied.
  • Pedal Sensor (PAS) Connection: Connects to the pedal assist sensor, which detects pedaling motion and provides motor assistance.
  • Other Auxiliary Connections: May include connections for headlights, taillights, or other accessories, depending on your e-bike's setup.

Important: Always ensure that all connections are secure and correctly matched according to your e-bike's wiring diagram. Incorrect wiring can damage the controller or other components. If you are unsure, seek professional assistance.

5. Operation

The Lishui X098-AXC003A controller manages the power delivery to your e-bike's motor based on inputs from the throttle, pedal assist sensor, and brake levers, all communicated via the KDS display.

Basic Operation Sequence:

  1. Power On: Turn on your e-bike's battery and then the KDS display. The display should illuminate and show basic information.
  2. Select Assist Level: Use the KDS display to select your desired pedal assist level (PAS).
  3. Start Riding:
    • Pedal Assist: Begin pedaling, and the controller will provide motor assistance according to the selected PAS level.
    • Throttle (if equipped): Gently engage the throttle to accelerate the e-bike.
  4. Braking: When the brake levers are engaged, the controller will cut power to the motor, ensuring safe deceleration.
  5. Power Off: Turn off the KDS display, then the e-bike's battery, after your ride.

This controller features frontier hall-sensorless motor technology, which contributes to low-cost maintenance and reduced interference during motor startup.

6. Maintenance

To ensure the longevity and optimal performance of your Lishui X098-AXC003A controller, follow these maintenance guidelines:

  • Keep Clean: Regularly clean the exterior of the controller to prevent dust and dirt buildup, which can affect heat dissipation. Use a soft, dry cloth.
  • Check Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent power or component damage.
  • Avoid Water and Moisture: While the controller may have some water resistance, avoid submerging it in water or exposing it to heavy rain for extended periods.
  • Temperature Management: Ensure the controller is installed in a location that allows for adequate airflow to prevent overheating, especially during prolonged use or in hot weather.
  • Physical Damage: Protect the controller from physical impacts or drops, which can damage internal components.

The hall-sensorless design of this controller inherently reduces maintenance needs associated with hall sensor malfunctions, which are a common issue in traditional motor controllers.

7. Troubleshooting

If you encounter issues with your e-bike's motor system, perform the following basic troubleshooting steps:

ProblemPossible CauseSolution
Motor not starting/no powerLoose battery connection, low battery, display off, faulty display/throttle.Check battery charge and connections. Ensure display is on and functioning. Inspect throttle and brake lever connections.
Intermittent powerLoose wiring, poor connection, overheating.Inspect all wiring for secure connections. Allow controller to cool down if it feels hot.
Motor runs roughly/noisyMotor phase wire issue, incorrect settings (less likely for this model).Check motor phase wire connections. If problem persists, consult a professional.
Display not workingLoose display cable, display fault, controller fault.Check display cable connection to controller. Ensure battery is charged.

If these steps do not resolve the issue, it is recommended to consult a qualified e-bike technician or contact Lishui Controller support.

8. User Tips

  • Verify Compatibility: Always double-check the compatibility of your display meter (must be KDS protocol) and motor with this controller before installation to avoid potential damage or malfunction.
  • Professional Installation: If you are not confident with electrical wiring, consider having the controller installed by a professional e-bike technician.
  • Secure Mounting: Ensure the controller is securely mounted to your e-bike frame in a location protected from excessive vibration, moisture, and direct impact.
  • Cable Management: Route all cables neatly and securely, avoiding sharp bends or areas where they might be pinched or abraded. Use zip ties or cable wraps to keep them tidy.

9. Support and Contact Information

For further assistance, technical support, or inquiries, please contact Lishui Controller through the following channels:

Nanjing Lishui Electronics Research Institute Co., Ltd (Headquarters):

  • Address: No.9 Shuibao Road, Yongyang Town, Lishui District, Nanjing, 211200, P.R.China
  • Telephone: +86-25-5720-2368 / +86-25-5720-7820
  • Fax: +86-25-5721-2368
  • Email: sales@lsdzs.com

Lishui Electronics Europe GmbH (EU R&D Center):

  • Address: Am Bahnhof 21, 53757 Sankt Augustin, Germany
  • Mobile: +49 15221467527
  • Telephone: +49-2241-9454576
  • Fax: +49-2241-9454577
  • Email: info@lsee.eu

Taiwan Office:

  • Address: No.450, Fuxing Rd., Taoyuan Dist., Taoyuan City 330, Taiwan
  • Telephone: +886 3-333 2298
  • Fax: +886 3-333 3843

A detailed user manual in PDF format is also available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.