Introduction
This manual provides detailed instructions for the safe and efficient operation of your Irado R6000 DMR Walkie Talkie. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
Setup
1. Package Contents
Before you begin, please check the package contents to ensure all items are present:
- 1 x Irado R6000 Radio
- 1 x Antenna
- 1 x Battery
- 1 x Charger base
- 1 x Belt Clip
- 1 x Type-C cable
- 1 x Adaptor
- (Note: Other accessories may vary depending on your specific purchase choice.)

Image: The Irado R6000 Walkie Talkie shown with its standard accessories including antenna, battery, charger, belt clip, Type-C cable, and adaptor.
2. Battery Installation and Initial Charging
- Install the Battery: Align the battery with the compartment on the back of the radio and press firmly until it clicks into place.
- Attach the Antenna: Screw the antenna clockwise into the connector on the top of the radio until it is secure.
- Initial Charging: Connect the Type-C cable to the radio's charging port or use the charger base. Plug the adaptor into a power outlet. The charging indicator will show the charging status. Fully charge the battery before first use.

Image: Close-up of the Irado R6000 showing the convenient Type-C charging port for fast charging.
3. Powering On/Off
To power on the radio, rotate the Power/Volume knob clockwise until you hear a click and the display illuminates. To power off, rotate the knob counter-clockwise until it clicks off.
Operating Instructions
1. Basic Operation
- Volume Control: Adjust the Power/Volume knob to set the desired listening volume.
- Channel Selection: Use the channel selector knob or programmable buttons to navigate through available channels.
- Push-to-Talk (PTT): Press and hold the PTT button on the side of the radio to transmit. Release it to receive.
2. Dual Mode Operation (Digital & Analog)
The Irado R6000 supports both digital (DMR Tier1 & Tier 2) and analog communication modes, with adaptive switching for seamless operation.

Image: The Irado R6000 display highlighting its Digital-Analog compatible dual-mode and adaptive switching capabilities.

Image: The Irado R6000, emphasizing its function as a DMR Digital Walkie Talkie.
3. Frequency Range
The radio operates within the following frequency ranges:
- Transmit (TX):
- Analog: 136-174MHz, 400-470Mhz
- Digital: 136-174MHz, 400-470Mhz
- Receive (RX):
- FM Broadcast: 64-108Mhz
- AM Aviation: 108-136Mhz
- Analog: 136-520MHz
- Digital: 136-174MHz, 400-470Mhz
4. Advanced Features
- Contacts & Memory: Features 32M big memory, supporting up to 500,000 global contacts (insertable via CSV file) and 2000 local contacts.
- Encryption: Features ARC/AES-128/AES-256 encryption for secure communications.
- Call Types: Supports Single Call, Group Call, and All Call functions.
- Display: Equipped with a 2.4-inch large color LCD display for clear information viewing.
- Spectrum Scanning: Allows for scanning across the frequency spectrum.
- NOAA Weather Channel: Receive weather alerts and information.
- SMS: Send and receive text messages.
- DTMF: Dual-Tone Multi-Frequency signaling.
- FM Broadcast Radio: Listen to FM radio stations.
- Promiscuous Mode: Enables listening to all traffic on a channel, regardless of talk group or color code.
- Dual-Standby: Monitor two different channels simultaneously.
- Talk Around and Frequency Reverse: For direct radio-to-radio communication and reversing transmit/receive frequencies.
- High Power Output: 10W output power for UHF/VHF for powerful transmission and penetration.

Image: The Irado R6000 display illustrating its 32M big memory and capacity to store up to 500,000 contacts.

Image: The Irado R6000 highlighting its 10W powerful transmission for high power penetration.
5. Customization and Security
- Programmable Keys: Customize programming keys and side-key functions for quick access to features.
- Device & Startup Customization: Define device name (sent at the end of calling), startup logo, and startup greetings.
- Voice Prompt: Customizable voice prompts in various languages.
- Channel Management: Editable channel names and support for 250 zones.
- Security Features: Includes Stun/Kill/Activation and Remote Monitor capabilities for managing lost or stolen radios.
- Privacy: One-click Privacy Decode (Analog Mode) and CTCSS/DCS Decode Remotely (Analog Mode).
- Power Management: Timed Lock or Auto-Lock, Backlight Level adjustment, and Timed Shutdown.
- Frequency Detect/Measurement: Allows for detection and measurement of frequencies.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: To prolong battery life, avoid overcharging and fully discharging the battery frequently. Store the battery in a cool, dry place when not in use for extended periods.
- Antenna Care: Ensure the antenna is securely attached. Avoid bending or forcing the antenna, as this can damage the connector.
- Environmental Conditions: Operate the radio within the specified working temperature range of -20°C to +60°C. Protect the device from extreme temperatures, direct sunlight, and moisture.
Troubleshooting
If you encounter issues with your Irado R6000, please refer to the following common problems and solutions:
- Radio does not power on: Ensure the battery is correctly installed and fully charged. Check the Power/Volume knob is rotated clockwise past the click.
- No signal or poor reception: Verify the antenna is securely attached. Check if you are within range of other radios or repeaters. Ensure the correct frequency and channel settings are selected.
- No audio or distorted audio: Adjust the volume knob. Check the speaker and microphone for obstructions. Ensure any connected audio accessories (e.g., headsets) are properly plugged in.
- Cannot transmit: Ensure the PTT button is fully pressed. Check if the channel is busy or if there are transmission restrictions (e.g., time-out timer).
- Display issues: If the display is blank or shows errors, try powering the radio off and on again. If the problem persists, contact support.
Specifications
| Category | Parameter | Value |
|---|---|---|
| General | Model Number | Iradio R6000 |
| Brand Name | RONGYIN | |
| Channel Capacity | 1024 Channels + 2*VFO Channels | |
| Channel Spacing (W/N) | Analog: 25kHz/12.5kHz, Digital: 12.5Khz | |
| Voltage | 7.4V DC | |
| Working Mode | Same frequency simplex, different frequency simplex | |
| Antenna | Removable Antenna | |
| Performance | Frequency Stability | ±2.5ppm |
| Working Temperature | -20°C to +60°C | |
| Dimension | 149*64*37 mm (approx. 300g) | |
| Transmitting | Output Power (W) | 10W (UHF/VHF) |
| Modulation Mode | Analog: F3E, Digital: 4FSK | |
| Maximum Deviation (W/N) | ≤5KHz/≤2.5KHz | |
| TX Current | ≤1500mA | |
| Receiving | Intermodulation (W/N) | 65dB/60dB |
| Audio Distortion | <5% | |
| Audio Output Power | ≤1W (16Ω) | |
| RX Current | ≤350mA (Standby: ≤70mA) |
Note: Specifications are subject to change due to technical improvements without prior notice.
User Tips
- Maximize Range: For optimal transmission and reception range, ensure the antenna is fully extended and you have a clear line of sight. High power (10W) can help penetrate obstacles, but terrain and environmental factors still play a significant role.
- Contact Management: Utilize the large memory capacity by organizing your contacts into zones and talk groups for efficient communication, especially when dealing with a large number of users.
- Battery Conservation: If not actively transmitting, consider using lower power settings when possible to extend battery life. The timed lock/auto-lock feature can also prevent accidental button presses and conserve power.
- Stay Updated: Regularly check for firmware updates (if available from the manufacturer) to ensure your radio has the latest features and performance enhancements.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.