Introduction
Thank you for choosing the Beitian BE-357 GPS Module. This manual provides essential information regarding the safe use, setup, operation, and maintenance of your GPS module. Please read it carefully before use and retain it for future reference. This module is designed for use in various applications, including FPV, drones, and fixed-wing aircraft, offering reliable Global Navigation Satellite System (GNSS) capabilities.
Safety & Warnings
WARNING: To reduce the risk of injury, fire, electric shock, or property damage, please read and follow all safety information and instructions before using this product.
- This product is intended for users aged 16 years and above.
- Not suitable for children under 3 years. Small parts may present a choking hazard.
- Keep away from fire, high temperature, water, moisture, and corrosive environments.
- Do not disassemble, modify, or repair the product without authorization.
- Use the product only for its intended purpose. Misuse may cause injury or damage.
- If the product (especially electronic parts) is damaged, overheated, emits smoke, unusual odor, or noise, stop using it immediately and contact customer support.
- Keep packaging materials (plastic bags, foam, etc.) away from children to avoid suffocation risk.
- For indoor use only unless otherwise specified on the product or packaging.
Product Overview
The Beitian BE-357 is a compact GNSS module designed for precise positioning. It supports multiple satellite systems and is suitable for integration into various remote-controlled vehicles.



Technical Specifications

| Feature | Specification |
|---|---|
| Model | BE-357 |
| Chip | M10050 |
| Default Position Mode | GPS, BDS, GALILEO |
| Frequency | GPS L1 C/A, QZSS L1 C/A/S, BDS B1I/B1C, GALILEO E1B/C, SBAS L1 C/A (WAAS, EGNOS, MSAS, GAGAN) |
| Horizontal Accuracy | 2.0m CEP |
| Baud Rate (bps) | 38400 |
| Update Rate | 1HZ |
| Input Voltage (VCC) | DC 3.6V - 5.5V (Typical: 5.0V) |
| Current | 15mA/5.0V |
| Size | 35 x 27 x 8.5 mm |
| Weight | 13.9g |
| Connectors | 1.25mm 6pin |
| Compass | No |
| Material | ABS/Electronic Components |
| Operating Temperature | -10°C ~ 40°C |
| Recommended Age | 16+ |
| Certifications | CE, ROHS |
| Intended Use | Vehicles & Remote Control Toys |
Setup
1. Preparation
- Remove all protective films or packaging materials from the module.
2. Power Supply & Connection
- Connect the provided cable to the 1.25mm 6-pin connector on the GPS module.
- Ensure the power supply is within the specified voltage range of DC 3.6V - 5.5V (typical 5.0V).

Pin Description:
| PIN | Name | I/O | Description |
|---|---|---|---|
| 1 | PPS | O | 1 Pulse Per Second when 3D fixed |
| 2 | GND | G | Ground |
| 3 | TX | O | TTL Serial Data Output |
| 4 | RX | I | TTL Serial Data Input |
| 5 | VCC | I | DC 3.6V - 5.5V supply input, Typical: 5.0V |
| 6 | BOOT | I | N.C. |
Operating Instructions
1. Power On
- Once connected to a stable power supply, the module will power on automatically.
2. Indicator Lights
- Blue Light (TX light): The blue light flashes when power is on, indicating that there is data output.
- Red Light (PPS light): The red light does not light up if the module is not positioned. After achieving 3D positioning, it starts to flash.
3. General Operation
- Use the product only as described in this manual and according to its intended purpose for GPS/GNSS positioning in FPV, drone, or fixed-wing applications.
Maintenance & Storage
Cleaning
- Turn off the device before cleaning.
- Use a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials.
Storage
- Store in a dry place at room temperature (15°C - 35°C).
- Keep away from direct sunlight and moisture.
Long-term Storage
- If not used for a long time, ensure the device is stored in optimal conditions to prevent degradation.
Troubleshooting
No specific troubleshooting information is provided in the available documentation. If you encounter issues, please refer to the "Customer Support" section for assistance.
User Tips
No specific user tips were available from customer reviews or Q&A for this product.
Compliance Information
This product complies with the essential requirements of the following EU Directives and Regulations (where applicable):
- General Product Safety Regulation (EU) 2023/988 (GPSR)
- Toy Safety Directive 2009/48/EC (for toys)
- EMC Directive 2014/30/EU (for applicable products)
- ROHS Directive 2011/65/EU and (EU) 2015/863
- WEEE Directive 2012/19/EU
- REACH Regulation (EC) No 1907/2006
CE marking indicates conformity with applicable EU Directives. (Not all products may require CE marking.)
Disposal & Recycling
This symbol indicates that this product should not be treated as household waste.
According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
Dispose of packaging materials responsibly. Recycle paper, cardboard, and plastic where facilities exist. Protect our environment. Thank you for your cooperation.
Customer Support
If you encounter any problems such as product damage, missing parts, or require customization or bulk order discounts, please contact us through the following channels:
- Phone/WhatsApp: +86 18929344627
- Email: sales09@diymalls.com
We will reply to you as soon as possible.
Manufacturer: Shenzhen DIY Maker Co., Limited
EU Responsible Person: eVatmaster Consulting GmbH
Document Information
| Field | Detail |
|---|---|
| Document Type | Product Safety & User Manual |
| Version | V1.0 |
| Revision Date | May 2026 |
| Language | English (EN) |
A PDF version of the user manual is available at https://manuals.plus/m/2912f295cd8b8444bc811f0e1c326e04c18aed0c5646415bdde8a9bae5555f8c. Please refer to it for additional details.