GUTWAREN 267-9710, 267-9717, 267-9722, 268-1835

Contents

GUTWAREN Diesel Injector Instruction Manual

Model(s): 267-9710, 267-9717, 267-9722, 268-1835

Brand: GUTWAREN

1. Introduction

This manual provides detailed instructions for the GUTWAREN Diesel Injector models 267-9710, 267-9717, 267-9722, and 268-1835. These injectors are designed for common rail systems in construction machinery. It covers product overview, specifications, installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity.

GUTWAREN specializes in the production of high-quality fuel injectors, utilizing advanced production equipment and rigorous testing procedures to ensure each product meets stringent quality standards.

Video: Showcase of the GUTWAREN Diesel Injector, highlighting its design and components.

2. Specifications

Product Specifications
AttributeValue
Brand NameGUTWAREN
OriginMainland China
MaterialMetal
OE Number(s)267-9710, 267-9717, 267-9722, 268-1835
ColorSliver
NameDiesel injector
ApplicationCommon rail system
Main accessoriesSolenoid valve, Injector valve, Injector nozzle
Item Length20
is_customizedNo
High-concerned chemicalNone

Compatible OE Numbers

The following is a list of compatible OE numbers for various diesel injector models:

  • 10R-7222, 392-0227, 295-1412, 2645A751, 217-2570
  • 1504453, 392-0240, 317-5278, 2645A753, 222-5965
  • 2490746, 394-3500, 319-0677, 280-0574, 222-5966
  • 0445120348, 459-8473, 328-2574, 289-0753, 223-5327
  • 0R-4987, 4W7015, 328-2576, 291-5911, 223-5328
  • 0R-9348, 4W7016, 328-2580, 2C-0273, 229-8842
  • 104-3377, 4W7017, 328-2585, 312-5620, 235-2888
  • 10R-0781, 4W7018, 328-2586, 320-0655, 235-5261
  • 10R-0960, 4W7019, 32E61-00022, 320-0677, 235-9649
  • 10R-0967, 4W7022, 350-7555, 320-0680, 236-0692
  • 10R-1003, 4W7025, 354-4340, 320-0690, 236-0962
  • 10R-1256, 4W7026, 359-4020, 321-0990, 238-8092
  • 10R-1258, 4W7032, 359-4030, 321-3600, 238-8901
  • 10R-1259, 53L-8062, 359-4040, 326-4700, 241-3239
  • 10R1279, 623-8218, 359-4050, 326-4740, 241-3283
  • 10R-1814, 6N7828, 359-4060, 326-4756, 242-0857
  • 10R-7223, 7N0449, 359-4070, 32F61-00012, 243-4502
  • 10R-7224, 7W6929, 359-4080, 32F61-00013, 246-1854
  • 10R-7225, 7W7032, 359-4090, 32F61-00014, 249-0749
  • 10R-9000, 7W7038, 359-7434, 32F61-00022, 250-1302
  • 130 1804, 8N7005, 3645A749, 32F61-00062, 250-1311
  • 161-1758, 9L6969, 376-0509, 374-0750, 250-1313
  • 162-9610, 9N2366, 387-9426, 374-0751, 254-4330
  • 171-9710, 874822, 387-9427, 4P2995, 254-4339
  • 173-4566, 1077732, 387-9428, 4P6076, 254-4340
  • 177-4752, 2123467, 387-9429, 4P9077, 256-8106
  • 177-4754, 0445120347, 387-9430, 6L4355, 263-8218
  • 178-0199, 10R-1305, 387-9431, 6L4357, 265-8106
  • 1W5829, 10R-2977, 387-9432, 6L4360, 266-4387
  • 20R-0055, 10R-3147, 387-9433, 7C4184, 266-4446
  • 20R-0056, 10R-3262, 387-9434, 7E6408, 267-3360
  • 20R1262, 10R-7636, 387-9436, 7E-8729, 267-3361
  • 20R-1275, 10R-7673, 387-9438, 9Y3773, 267-9710
  • 212-3460, 10R-7951, 392-0201, 392-0211, 267-9717
  • 212-3463, 120-8220, 392-0202, 392-0221, 267-9722
  • 212-3467, 127-8205, 392-0206, 392-0224, 268-1835
  • 212-3468, 127-8207, 392-0210, 392-0225, 268-1836
  • 293-4073, 2645A746, 294-3002, 2645A749, 268-1840
  • 293-4074, 2645A747, 269-1839, 2645A743, 127-8228
  • 127-8209, 140-8713, 235-0617, 249-0713, 127-8230
  • 127-8211, 153-5938, 235-1400, 250-1309, 127-8230
  • 127-8213, 162-0212, 235-1401, 253-0615, 20R-4148
  • 127-8216, 162-0218, 239-4908, 253-0616, 211-3022
  • 127-8218, 174-7526, 244-7716, 253-0617, 211-3028
  • 127-8222, 174-7528, 249-0705, 253-0618, 249-0708
  • 127-8225, 179-6020, 249-0707, 254-4183, 249-0709
  • 259-5409, 249-0712

3. Setup and Installation

Installation of diesel injectors requires specialized knowledge and tools. It is highly recommended that installation be performed by a qualified professional to ensure proper function and safety.

3.1 Common Rail System Overview

Understanding the common rail system is crucial for proper injector installation and function. The diagram below illustrates the key components and fuel flow within a common rail system.

Diagram of a common rail fuel system

Image: Diagram of a common rail fuel system, illustrating the flow of high and low pressure fuel, including components like the pump, pressure limiting valve, oil rail, pressure sensor, injector, nozzle, SCV (Suction Control Valve), and ECU (Engine Control Unit).

3.2 Injector Components

Familiarize yourself with the injector's components before installation. The exploded views below show the internal parts of the diesel injector.

Exploded view of diesel common rail injector

Image: Exploded view of the diesel common rail injector, showing internal components like solenoid valve, injector valve, and injector nozzle.

Detailed exploded diagram of a diesel injector

Image: Detailed exploded diagram of a diesel injector, showing individual parts and their arrangement.

3.3 Pre-Installation Checks

  • Ensure the replacement injector matches the correct model and OE number for your vehicle/machinery.
  • Inspect the new injector for any visible damage or defects.
  • Ensure all necessary seals and O-rings are present and in good condition.
  • Clean the injector bore in the cylinder head thoroughly before inserting the new injector.

3.4 Installation Steps (General)

  1. Disconnect the battery and relieve fuel system pressure.
  2. Remove the old injector carefully, ensuring no debris falls into the engine.
  3. Install new copper washers and O-rings as required.
  4. Insert the new injector into its bore, ensuring it seats correctly.
  5. Tighten the injector retaining clamp to the manufacturer's specified torque.
  6. Reconnect fuel lines and electrical connectors.
  7. Bleed the fuel system according to the engine manufacturer's instructions.
  8. Start the engine and check for leaks or abnormal operation.

4. Operation

The diesel injector is a critical component of the common rail fuel injection system. It precisely atomizes and injects fuel directly into the combustion chamber at very high pressures, controlled by the Engine Control Unit (ECU). This precise control optimizes fuel efficiency, reduces emissions, and enhances engine performance.

Once installed, the injector operates automatically as part of the engine's fuel management system. No manual intervention is required during normal operation.

5. Maintenance

Proper maintenance is essential for the longevity and optimal performance of your diesel injectors and the entire fuel system.

5.1 General Maintenance Tips

  • Fuel Quality: Always use high-quality, clean diesel fuel. Contaminated fuel is a primary cause of injector failure.
  • Fuel Filters: Regularly replace fuel filters according to the engine manufacturer's recommendations to prevent contaminants from reaching the injectors.
  • System Cleanliness: Maintain overall cleanliness of the fuel system during any service or repair.
  • Professional Inspection: Have your fuel system, including injectors, inspected periodically by a qualified technician.

5.2 Professional Testing

GUTWAREN injectors undergo rigorous testing using professional equipment to ensure quality and performance before shipment. If you suspect an issue, professional diagnostic testing is recommended.

Overview of professional testing equipment for diesel injectors

Image: Overview of professional testing equipment used for diesel injectors.

Close-up view of diesel injector testing equipment

Image: Close-up view of diesel injector testing equipment in operation.

6. Troubleshooting

If you experience issues with your diesel injector, consider the following general troubleshooting steps. Always consult a qualified mechanic or service professional for diagnosis and repair.

6.1 Common Symptoms of Injector Problems

  • Rough idling or engine misfires.
  • Reduced engine power or acceleration.
  • Increased fuel consumption.
  • Excessive smoke from the exhaust (black, white, or blue).
  • Unusual engine noises (e.g., knocking).
  • Check Engine Light (CEL) illumination.

6.2 Basic Checks

  • Visual Inspection: Check for any visible leaks around the injector or fuel lines.
  • Electrical Connections: Ensure all electrical connectors to the injector are secure and free from corrosion.
  • Fuel Filter: Verify that the fuel filter is not clogged and has been replaced recently.
  • Diagnostic Scan: Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the fuel system or injectors.

If basic checks do not resolve the issue, professional diagnosis is required.

7. User Tips

  • Model Verification: Always double-check that you have selected the correct injector model (OE number) for your specific application before installation.
  • Professional Installation: For optimal performance and to avoid potential damage, it is highly recommended to have these precision components installed by professional technicians.
  • Initial Inspection: Upon receipt, carefully inspect the product for any signs of damage that may have occurred during transit.

8. Warranty and Support

GUTWAREN is committed to providing quality products. In the event of product issues, the following support is available:

  • Free Returns: Free returns are available within 90 days of purchase.
  • Refund for Damaged Items: A refund will be issued if items are damaged upon receipt.

For any warranty claims or support inquiries, please contact our customer service team.

9. Contact Information

For further assistance, product inquiries, or to obtain our product catalog, please contact us:

  • Whatsapp: +8618396819960
  • Wechat & TEL: +8618396819960
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.