Dooya DC2700AM, DC2760AM, DC2702AM

Contents

Dooya Remote Controller User Manual

Models: DC2700AM, DC2760AM, DC2702AM

1. Introduction

This manual provides instructions for the Dooya DC2700AM, DC2760AM, and DC2702AM Rolling Code Remote Controllers. These wireless emitters are designed to control Dooya Rolling Code RF Motors used in electric curtain systems. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

Dooya Rolling Code Remote Controls (DC2700, DC2760, DC2702) for Electric Curtains
Figure 1: Dooya Rolling Code Remote Controls (DC2700, DC2760, DC2702) for Electric Curtains

2. Safety Information

  • This device operates at low voltage (below 50Vac or 75Vdc).
  • No high-concerned chemicals are used in the product.
  • Keep the remote control away from water and high humidity.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Ensure batteries are inserted with correct polarity.

3. Product Overview

The Dooya remote controllers are available in single, double, and 15-channel versions, allowing flexible control over various electric curtain setups. All models operate on a 433MHz frequency and are designed for use with Dooya Rolling Code RF Motors.

3.1 Models

  • DC2700AM: Single Channel Remote Control
  • DC2760AM: Double Channel Remote Control
  • DC2702AM: 15 Channel Remote Control with digital display
Comparison of Dooya DC2700 (Single Channel), DC2760 (Double Channel), and DC2702 (15 Channel) remotes
Figure 2: Comparison of Dooya DC2700 (Single Channel), DC2760 (Double Channel), and DC2702 (15 Channel) remotes

3.2 Components

Each remote control typically includes:

  • Remote control unit
  • Wall mount bracket (may vary by model)

Note: Batteries are not included and must be purchased separately.

Dooya DC2700AM Single Channel Remote Control, front and open back view showing battery compartment
Figure 3: DC2700AM Remote Control with open battery compartment
Dooya DC2760AM Double Channel Remote Control, front and open back view showing battery compartment and wall mount
Figure 4: DC2760AM Remote Control with open battery compartment and wall mount

4. Setup and Pairing

4.1 Battery Installation

  1. Open the back cover of the remote control.
  2. Insert the required batteries (typically AAA, not included) into the battery compartment, ensuring correct polarity (+/-).
  3. Close the back cover securely.

4.2 Pairing with Dooya Rolling Code RF Motor

Follow these steps to pair your remote control with a compatible Dooya Rolling Code RF Motor:

  1. Select Indicator Light: Ensure the remote is ready for pairing. For multi-channel remotes (DC2702AM), select the desired channel.
  2. Activate Motor Pairing Mode: Open the back cover of the remote control to access the P2 key. Power on the electric curtain motor. Press and hold the setting key (P2 key) on the motor for 3 seconds. The motor indicator light will turn on.
  3. Initiate Remote Pairing: Press the P2 key on the remote control once. The motor indicator light will flash slowly.
  4. Confirm Pairing: Press the P2 key on the remote control again. The motor indicator light will flash quickly, indicating successful pairing.
  5. Test Operation: Test the Up and Down keys on the remote control to confirm the motor responds correctly.

5. Operating Instructions

Once paired, operate your electric curtain motor using the remote control buttons:

  • Up Arrow (▲): Moves the curtain upwards or opens it.
  • Down Arrow (▼): Moves the curtain downwards or closes it.
  • Stop/Pause (—): Stops the curtain at its current position.
  • Channel Selection (DC2760AM, DC2702AM): Use the channel selection buttons (often marked with arrows or a display) to switch between different motors or groups of motors.
Dooya DC2700AM Single Channel Remote Control, front view
Figure 5: DC2700AM Single Channel Remote Control
Dooya DC2760AM Double Channel Remote Control, front view
Figure 6: DC2760AM Double Channel Remote Control
Dooya DC2702AM 15 Channel Remote Control, front view
Figure 7: DC2702AM 15 Channel Remote Control

6. Maintenance

6.1 Battery Replacement

When the remote control's range decreases or buttons become unresponsive, it's time to replace the batteries. Follow the battery installation steps in Section 4.1.

6.2 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.

7. Troubleshooting

  • Remote not responding: Check battery levels and ensure they are inserted correctly. Re-pair the remote with the motor if necessary (refer to Section 4.2).
  • Limited range: Replace batteries. Ensure there are no obstructions between the remote and the motor.
  • Motor not responding to specific channel (multi-channel remotes): Ensure the correct channel is selected on the remote.

8. Specifications

FeatureSpecification
Model NumbersDC2700AM, DC2760AM, DC2702AM
Frequency433MHz
VoltageLow voltage: Below 50Vac or 75Vdc
Wattage0W (for remote control unit)
CertificationCE
OriginMainland China
BatteryNot Included
Approx. Package Dimensions (L x W x H)15cm x 15cm x 15cm
Approx. Package Weight0.3 kg

9. User Tips

  • Compatibility Check: These remote controllers are specifically designed for Dooya Rolling Code RF Motors. They are not compatible with Dooya fixed code motors. Always verify your motor type before attempting to pair.
  • Battery Availability: Batteries are not included with the remote control. Please purchase the appropriate batteries (e.g., AAA) from your local market before setup.

10. Warranty and Support

For warranty information, technical support, or any issues not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format may be available for download from the manufacturer's website or by contacting customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.