1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Navirider GPS Navigation Auto Carplay System. This system is designed to enhance your driving experience with advanced navigation, multimedia, and connectivity features, specifically tailored for Land Rover Defender 90/110/130 L663 models from 2018 to 2024.
Figure 1: Navirider 13-inch display installed in a Land Rover Defender dashboard.
2. Setup and Installation
Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified professional.
2.1 Package Contents
Before installation, ensure all components are present:
- Navirider 13-inch Head Unit
- Power Harness (Plug and Play)
- GPS Antenna
- USB Cables
- External Microphone
- Reverse Camera (Gift)
- Mounting Brackets and Screws
2.2 Installation Steps (Land Rover Defender 2018-2024)
The system is designed for non-destructive installation, utilizing a plug-and-play cable that does not require cutting original car wiring. This preserves your car's warranty.
Figure 2: Installation diagram for Land Rover Defender, illustrating dashboard disassembly and wiring connections.
- Prepare the Dashboard: Carefully remove the original car's trim panels and radio unit. This typically involves using plastic pry tools to avoid damage.
- Connect Wiring Harness: Connect the provided plug-and-play wiring harness to the original car's harness. Ensure all connections are secure.
- Connect USB Interfaces: The system supports two USB interfaces for external storage or device connection. Connect these as needed.
- Connect LVDS and Power Cables: Connect the LVDS cable and the main power cable to the new head unit.
- Install GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield.
- Install External Microphone: Position the external microphone for optimal voice pickup, usually near the driver's sun visor.
- Install Reverse Camera: If using the included reverse camera, install it at the rear of the vehicle and connect its video and power cables to the head unit.
- Secure the Head Unit: Mount the Navirider head unit into the dashboard opening using the provided brackets and screws.
- Reassemble Dashboard: Carefully reassemble all removed trim panels.
Important: Do NOT connect to the original car's power outlet directly without the provided harness.
2.3 Initial Power On and Configuration
After installation, turn on your vehicle's ignition. The Navirider system should power on automatically.
- Language Selection: Follow on-screen prompts to select your preferred OSD language.
- Network Connection: Navigate to System Settings to connect to a Wi-Fi network or insert a 4G SIM card for mobile data access.
- Bluetooth Pairing: Pair your mobile phone via Bluetooth for hands-free calling and audio streaming.
3. Operating Instructions
Your Navirider system offers a wide range of functions accessible via the intuitive Android 15 interface.
Figure 3: Android home screen displaying core application icons.
3.1 Navigation Function
The system supports both online and offline maps. Real-time traffic information is available when connected to the internet.
Figure 4: Navigation screen displaying Google Maps with route information.
- Online Maps: Requires Wi-Fi or 4G connection. Download map applications from the Play Store.
- Offline Maps: Download map data for offline use to navigate without an internet connection.
- AR Real-life Navigation: Supports AutoNavi map AR real-scene navigation, real-time positioning, and scanning of real-scene roads.
3.2 Bluetooth Function
Connect your smartphone via Bluetooth 5.0 for various features.
Figure 5: Bluetooth function screen indicating connection status and music playback.
- Hands-Free Calling: Answer and make phone calls directly from the head unit.
- Music Streaming (A2DP): Play audio from your phone through the car's speakers.
- Bluetooth OBD: Support for external Bluetooth devices like OBD scanners.
3.3 CarPlay / Android Auto
The system features built-in wireless Apple CarPlay and Android Auto for seamless smartphone integration.
Figure 6: Wireless CarPlay interface displayed on the screen, showing various phone applications.
- Wireless Connection: Connect your iPhone or Android device wirelessly.
- Features: Access navigation, make calls, send/receive messages, and enjoy music directly from the car's display.
3.4 Reversing Video and 360 Panoramic View
The system supports AHD HD reversing video and an optional 360 panoramic view.
Figure 7: AHD HD Reversing Video display with dynamic parking guidelines.
Figure 8: Seamless 360 Panoramic view from a bird's-eye perspective, showing surrounding road conditions.
- AHD Reversing Video: Automatically switches to the camera image when reverse gear is engaged. Features AHD ultra-clear 1080P resolution.
- 360 Panoramic Function: Built-in function (requires separate purchase and installation of 4 cameras) provides a bird's-eye view to eliminate blind spots.
3.5 Wi-Fi / 4G LTE Connection
Stay connected with built-in Wi-Fi and 4G LTE capabilities.
Figure 9: Wi-Fi/4G LTE connection screen demonstrating video playback after networking.
- App Downloads: Download various Android applications from the Play Store.
- Map Updates: Keep your map software updated to the latest versions.
- Dual-Band 5G Wi-Fi: Ensures faster and more stable connections.
3.6 Split Screen Display
Enjoy multitasking with the split-screen feature, allowing simultaneous display of navigation, movies, music, or other applications.
Figure 10: Split screen display showing radio and video applications simultaneously.
3.7 Audio Settings (DSP)
The built-in ROHM DSP (Digital Sound Processor) with 36 bands allows for precise audio customization.
Figure 11: Audio Equalizer (EQ) settings interface with multiple frequency bands for sound tuning.
- Equalizer: Adjust frequency bands to tailor sound output.
- Surround Sound: Enhance the audio experience with virtual surround sound.
- Bass Boost/Filter: Customize bass levels for desired impact.
3.8 Steering Wheel Control
The system supports original steering wheel buttons for convenient control of media and calls.
3.9 ADAS Intelligent Assisted Driving
The system supports ADAS features for enhanced driving safety.
Figure 12: ADAS features diagram illustrating 'Watch out for the car ahead', 'lane departure', and 'front car start' warnings.
3.10 Dual Microphone Design
Features both built-in and external microphones for clear communication.
Figure 13: Diagram illustrating built-in and external microphone placement for optimal call quality.
4. Maintenance
To ensure the longevity and optimal performance of your Navirider system, follow these maintenance guidelines:
- Screen Cleaning: Use a soft, lint-free cloth slightly dampened with a screen cleaner (or water) to clean the display. Avoid harsh chemicals or abrasive materials.
- Software Updates: Periodically check for system and application updates via the Wi-Fi/4G connection to ensure you have the latest features and security patches.
- SIM Card Handling: If using a 4G SIM card, ensure the device is restarted after insertion for proper recognition.
- Environmental Conditions: Operate the device within the specified temperature range of -30℃ to 80℃.
5. Troubleshooting
If you encounter issues with your Navirider system, refer to the following common problems and solutions:
- No Power: Check all power connections. Ensure the car's ignition is on. If professionally installed, verify the wiring harness is correctly seated.
- No Sound: Check volume settings on the head unit and your connected device. Verify speaker connections. Ensure the DSP settings are not muting audio.
- GPS Signal Lost: Ensure the GPS antenna is properly installed and has a clear view of the sky. Check for obstructions.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the head unit and your phone. Delete previous pairings and try re-pairing.
- Wi-Fi/4G Connectivity Problems: Verify Wi-Fi network password. Ensure the 4G SIM card is correctly inserted and activated. Restart the device after inserting a SIM card.
- Touch Screen Unresponsive: Restart the system. If the issue persists, contact support.
- CarPlay/Android Auto Not Connecting: Ensure your phone's software is up to date. Try connecting with a different USB cable if using a wired connection, or re-pair for wireless.
6. Specifications
The Navirider system offers various configurations. Below are the general specifications:
| Feature | Specification |
|---|---|
| RAM+ROM Options | 4GB RAM 32GB ROM, 4GB RAM 64GB ROM, 6GB RAM 128GB ROM, 8GB RAM 128GB ROM, 8GB RAM 256GB ROM |
| Internet Connectivity | WIFI + Built-in 4G LTE Network (Dual-Band 5G WIFI 5.0 Bluetooth Module) |
| Processor | TS10 UIS7862 Chip, 8-core (2*A75+6*A55), 1.8GHz main frequency |
| CarPlay / Android Auto | Built-in Wireless Carplay & Android Auto |
| 360 Panoramic Function | Built-in (360 camera needs to be purchased separately) |
| DSP | Built-in ROHM DSP, 36-band digital audio processor |
| Bluetooth Version | Bluetooth 5.0 (Supports phone book, A2DP, Bluetooth OBD, mouse, handle, keyboard) |
| Radio Tuner | FM1, FM2, FM3, AM1, AM2, RDS, Built-in digital radio TDA7708 |
| Amplifier Chip | TDA7851 |
| Power Output | 4*50W |
| USB Ports | USB1, USB2 (Supports MAX 2TB External Harddisk) |
| Operating Temperature | -30℃ to 80℃ |
| Operating System | Android 15 |
| Screen Type | 2.5D IPS Screen, 1920*720 Resolution, 13.3-inch Display Size |
| Material | Plastic & Glass |
| Item Weight | 3kg |
| Voltage | 12 V |
| Special Features | Built-In Speaker/Microphone, Wi-Fi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, Support steering wheel control |
| Digital Media Format | JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese |
| Certification | CE |
7. User Tips
- Keep Software Updated: Regularly check for system and app updates to ensure optimal performance, new features, and security.
- Utilize Split Screen: For enhanced multitasking, use the split-screen feature to view navigation and media simultaneously.
- Optimize Audio: Experiment with the DSP equalizer settings to find the perfect sound profile for your preferences.
- Secure Network: When connecting to Wi-Fi, ensure you are using a secure network. For 4G, monitor data usage if on a limited plan.
- Backup Data: If storing important files on external USB drives, ensure you have backups.
8. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.
