1. Introduction
This manual provides essential information for the safe and effective operation, setup, and maintenance of your ANDELI MIG-270DLS 4-in-1 Multi-Process Welder. Please read this manual thoroughly before using the equipment to ensure proper function and safety.

The ANDELI MIG-270DLS is a versatile 4-in-1 welding machine capable of performing MIG (Gas MIG, Flux MIG), Lift TIG, and MMA (Stick) welding processes. It supports dual voltage input (110V/220V) and is designed for welding various materials including aluminum, carbon steel, stainless steel, galvanized plate, square tube, and angle steel.

2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ensure adequate ventilation to avoid inhaling welding fumes.
- Protect bystanders from arc rays and hot metal.
- Do not operate the welder in damp or wet conditions.
- Ensure the work area is free of flammable materials.
- Always disconnect power before performing maintenance or changing accessories.
3. Package Contents
Upon unpacking, verify that all items are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

Standard accessories typically include:
- Ground Clamp (2M)
- MMA Holder (3M)
- 15AK MIG Torch (3M)
- Gas Pipe (3M)
- Wire Feeding Tube
- Flux-cored Wire
- W Wire Feed Roller
- U Wire Feed Roller
- Nozzle Shield (2 pieces)
- Nozzles (10 pieces)
- Welding Rods (5 pieces)
4. Product Overview
4.1. Control Panel Introduction
The MIG-270DLS features a humanized design control panel for easy understanding and operation. Refer to Figure 4 for a detailed breakdown of the control panel elements.

- Gas Checking: For verifying gas flow.
- Mode Selection: Switch between MIG, Synergy MIG, MMA, and TIG welding modes.
- MIG Parameter: Select gas type for MIG welding (CO2, MIX, or Flux).
- Aluminium Welding: Dedicated setting for aluminum welding.
- Wire Checking: For checking wire feed.
- 2T/4T: Trigger mode selection (2-stroke or 4-stroke).
- Spot Welding: For spot welding applications.
- Welding Wire Diameter: Select appropriate wire diameter (1.0mm, 0.9mm, 0.8mm, 0.6mm).
The welder also features dual digital displays for voltage and current, and double knob adjustments for synergistic control.

4.2. Product Interfaces

- MIG Torch Connection: For connecting the MIG welding torch.
- Function Button: To cycle through various settings or confirm selections.
- Screen: Digital display for welding parameters.
- Adjusting Knob: For fine-tuning welding voltage and current.
5. Setup
5.1. Power Connection
The MIG-270DLS supports dual voltage input (110V/220V). Ensure the correct power supply is used and the machine is properly grounded.
5.2. Welding Mode Specific Setup
5.2.1. MIG Welding Setup
- Connect the MIG torch to the designated port.
- Connect the ground clamp to the workpiece.
- Install the appropriate wire feed roller (W for solid wire, U for aluminum wire).
- Load the welding wire into the wire feeder and through the wire feeding tube to the torch.
- Connect the gas pipe to the gas cylinder (if using Gas MIG) and to the welder's gas inlet.
- Select "MIG" or "SYNMIG" mode on the control panel.
- Choose the correct MIG parameter (CO2, MIX, or Flux) based on your wire and material.
- Select the appropriate welding wire diameter.
- Perform a "Gas Checking" and "Wire Checking" to ensure proper flow and feed.

5.2.2. Lift TIG Welding Setup
- Connect a TIG torch (not included in standard accessories) to the appropriate connection.
- Connect the ground clamp to the workpiece.
- Connect the gas pipe to the gas cylinder (Argon) and to the welder's gas inlet.
- Select "TIG" mode on the control panel.
- Ensure the tungsten electrode is properly sharpened and installed in the TIG torch.

5.2.3. MMA (Stick) Welding Setup
- Connect the MMA holder to the positive (+) terminal and the ground clamp to the negative (-) terminal (or vice-versa depending on electrode polarity requirements).
- Connect the ground clamp to the workpiece.
- Insert the welding rod into the MMA holder.
- Select "MMA" mode on the control panel.

6. Operating Instructions
6.1. General Operation
- Turn on the welder using the main power switch.
- Select the desired welding process (MIG, SYNMIG, MMA, TIG) using the mode selection button (2 on Figure 4).
- Adjust welding parameters (voltage, current, wire feed speed) using the adjusting knobs. For synergistic modes, the machine will automatically suggest parameters based on wire type and material.
- For MIG welding, select the appropriate gas type (CO2, MIX, Flux) and wire diameter (3 and 8 on Figure 4).
- For TIG welding, ensure proper gas flow and tungsten setup.
- For MMA welding, select the appropriate current for your electrode.
- Begin welding, ensuring proper technique and safety.
6.2. Aluminum Welding
The MIG-270DLS is capable of welding aluminum with a thickness of 2-4mm. Ensure you use appropriate aluminum wire, U-groove wire feed rollers, and 100% Argon shielding gas for optimal results. Select the "AL" (Aluminium Welding) setting on the control panel (4 on Figure 4).

7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the power supply before performing any maintenance.
- Cleaning: Regularly clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is powered off and unplugged.
- Torch and Cable Inspection: Inspect welding torches, cables, and connections for wear, damage, or loose connections before each use. Replace damaged parts immediately.
- Wire Feeder: Keep the wire feeder mechanism clean and free of debris. Ensure wire feed rollers are appropriate for the wire type and are not worn.
- Gas System: Check gas hoses and connections for leaks. Ensure gas flow is consistent.
- Electrode Holder/TIG Torch: Clean the electrode holder and TIG torch components. Replace worn contact tips, nozzles, and collets as needed.
No specific maintenance schedule or detailed instructions were provided in the product description. Refer to general welding equipment maintenance guidelines for best practices.
8. Troubleshooting
This section provides general troubleshooting tips. For complex issues, contact qualified service personnel.
- No Power: Check power cord connection, circuit breaker, and ensure the main power switch is on.
- No Arc: Ensure ground clamp is securely attached to the workpiece, welding cables are properly connected, and the correct welding mode is selected. Check for proper wire feed (MIG) or electrode contact (MMA/TIG).
- Poor Weld Quality: Adjust welding parameters (voltage, current, wire feed speed), ensure proper gas flow (MIG/TIG), use clean base metal, and check for correct electrode/wire type and size.
- Wire Feeding Issues (MIG): Check wire spool tension, ensure wire is not tangled, inspect wire liner for blockages or kinks, and verify correct wire feed roller size and tension.
- Overheating: Allow the machine to cool down. Ensure ventilation openings are clear and the duty cycle is not exceeded.
No specific troubleshooting guide was provided in the product description.
9. Specifications
The following table details the technical specifications of the ANDELI MIG-270DLS welder.

| Parameter | 110V | 220V | ||||
|---|---|---|---|---|---|---|
| MIG | MMA | LIFT TIG | MIG | MMA | LIFT TIG | |
| Power Supply Voltage (V) | 110 | 220 | ||||
| Frequency (Hz) | 60 | 50 | ||||
| Rated Input Power (KW) | 4.2 | 4.3 | 3.1 | 5.9 | 6 | 4.4 |
| Rated Input Current (A) | 38.1 | 38.6 | 28.3 | 26.8 | 27.7 | 20.1 |
| Effective Input Current (A) | 15.9 | 17.5 | 11.6 | 9.4 | 10.7 | 7 |
| Welding Current Range (A) | 30-140 | 20-120 | 30-140 | 30-180 | 20-160 | 30-180 |
| Load Voltage (V) | 21 | 24.8 | 15.6 | 23 | 26.4 | 17.2 |
| No-Load Voltage (V) | 62 | |||||
| Efficiency (%) | 85% | |||||
| Power Factor | 0.93 | |||||
| Protection Class | IP21S | |||||
| Insulation Class | H | |||||
| Cooling | Fan | |||||
| Dimension (MM) | 490 x 200 x 320 | |||||
| Net Weight (KG) | 10 | |||||
Additional specifications:
- Origin: Mainland China
- Wire Melting Type: Short Circuit Transfer
- Usage: Welding
- Key Selling Points: Competitive Price
- Applicable Industries: Building Material Shops
10. User Tips
Based on general user experiences with multi-process welders:
- For best results with aluminum welding, ensure your aluminum wire is clean and use a dedicated U-groove roller to prevent deformation.
- When switching between welding processes, double-check all connections and settings on the control panel to avoid errors.
- Practice on scrap material to fine-tune settings before working on your main project.
- Keep your welding area tidy and well-lit to enhance safety and precision.
11. Warranty and Support
The ANDELI MIG-270DLS welder typically comes with a 1-year warranty. For warranty claims, technical support, or service inquiries, please contact your original point of purchase or the ANDELI customer service department.
Manufacturer: ANDELI Group Co,Ltd
Company Profile: Andeli Group Co,Ltd, founded in 1985, is a leading group in the electrical industry, with production, scientific research, transport, import and export trade, and investment. They are based in Liushi, China, known as "the Electric Device Metropolis of China." Andeli has passed ISO9001:2000 Quality Management System and various international certifications (ROHS, CECBSIMKO, KEMA). They produce a wide range of high-and-low voltage electrical devices, complete equipment power transformers, cables, wires, instruments, meters, and welding equipment.