GLOBACT 1.9in RC Crawler Tires Instruction Manual

Introduction

Thank you for choosing GLOBACT 1.9in RC Crawler Tires. These high-quality rubber tires are designed to enhance the performance and appearance of your 1/10 scale RC crawler vehicle. This manual provides essential information for proper setup, usage, and maintenance to ensure optimal performance and longevity of your tires.

Compatibility

These 1.9in RC tires are designed for use with almost all 1/10 scale 1.9in beadlock wheels. They are suitable for various RC crawler models, including but not limited to:

• 1/10 TRX4
• 1/10 TRX6
• Axial SCX10 II
• Axial SCX10 III
• Redcat Gen 8
• Redcat Gen 7
• RC4WD D90

Ensure your RC vehicle's wheels are compatible with 1.9-inch tires for proper fitment.

Key Features

• Excellent Performance: Anti-skid surface provides strong road holding and durability for stable and flexible driving.
• Enhanced Grip: Unique deep-grooved style tread pattern offers superior grip on various terrains such as pavement, dry grass, stony ground, and loose surfaces.
• High-quality Rubber Material: Made from durable and sturdy rubber for long service life and resistance to wear.
• Lining Sponge Design: Includes standard lining sponge and reinforcement design to enhance tire support, stability, and maintain a fuller appearance.

Setup and Installation

Follow these steps to properly install your GLOBACT RC Crawler Tires onto your beadlock wheels:

1. Prepare Wheels: Ensure your 1.9in beadlock wheels are clean and free from debris.
2. Insert Foam Inserts: Carefully insert the provided foam lining sponges into each tire. The foam should sit snugly inside the tire, filling the cavity to provide proper support.
3. Mount Tire to Wheel:
   • Place one side of the tire bead onto the inner lip of one half of the beadlock wheel.
   • Position the other half of the beadlock wheel, ensuring the tire bead is properly seated between the two halves.
   • Align the screw holes of the wheel halves.
4. Secure with Screws: Insert and tighten the screws (typically provided with your beadlock wheels, not the tires) to secure the two halves of the wheel together, clamping the tire beads firmly in place. Tighten screws evenly in a star pattern to ensure even pressure and prevent warping.
5. Check Fitment: Once installed, ensure the tire is seated correctly on the wheel and rotates freely without wobbling.

Operating Guidelines

These tires are designed for off-road RC crawling. To maximize performance and tire life:

• Terrain: Utilize on varied terrains such as dirt, rocks, grass, and loose surfaces where their deep tread pattern can provide optimal grip.
• Avoid Harsh Surfaces: While durable, prolonged use on abrasive surfaces like concrete or asphalt can accelerate wear.
• Driving Style: The tires are designed for crawling and trail driving. Aggressive high-speed driving or drifting on hard surfaces may cause premature wear.

Maintenance

Proper maintenance will extend the life and performance of your RC tires:

• Cleaning: After each use, especially in muddy or dusty conditions, clean the tires with a soft brush and water to remove dirt and debris from the treads. Avoid harsh chemicals that could degrade the rubber.
• Drying: Allow tires to air dry completely before storage to prevent mold or mildew, especially if foam inserts are present.
• Storage: Store tires in a cool, dry place away from direct sunlight and extreme temperatures. UV exposure can cause rubber to harden and crack over time.
• Inspection: Regularly inspect tires for cuts, tears, or excessive wear. Replace damaged tires to maintain optimal performance and prevent further issues.
• Foam Inserts: Periodically check the foam inserts for compression or damage. Worn-out foams can affect tire performance and shape.

Troubleshooting

Issue: Poor Grip

Possible Causes:

• Tires are dirty or clogged with debris.
• Tires are worn out.
• Driving on unsuitable terrain.

Solutions:

• Clean tires thoroughly.
• Inspect for wear and replace if necessary.
• Ensure foam inserts are in good condition.
• Adjust driving style or choose appropriate terrain.

Issue: Tire Wobble

Possible Causes:

• Tire not properly seated on the beadlock wheel.
• Screws on beadlock wheel are unevenly tightened or loose.
• Damaged wheel or tire.

Solutions:

• Re-seat the tire on the wheel, ensuring both beads are correctly positioned.
• Check and re-tighten beadlock screws evenly.
• Inspect wheel and tire for damage and replace if necessary.

Specifications

User Tips

• For optimal performance, ensure the foam inserts are correctly positioned within the tires during installation.
• When mounting beadlock wheels, tighten screws gradually and evenly to prevent tire bead damage and ensure a secure fit.
• Consider the terrain before driving; these tires excel on loose and uneven surfaces.

Warnings and Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• This product is intended for use by individuals aged 14 years and older.
• Always supervise younger users.
• Keep small parts away from children to prevent choking hazards.
• Do not ingest any part of the product.

Warranty and Support

For any questions, concerns, or support regarding your GLOBACT RC Crawler Tires, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.

Brand: Globact

Seller: Globact Official Store