ANDELI CT-520

Contents

ANDELI CT-520 Multi-Function Welding Machine User Manual

Model: CT-520DPL | Brand: ANDELI

1. Introduction

The ANDELI CT-520DPL is a versatile 3-in-1 multi-function welding machine, combining TIG welding, Plasma CUT, and MMA (Manual Metal Arc) welding capabilities. This machine is designed for efficiency and precision, suitable for various metal processing tasks including carbon steel, stainless steel, and aluminum. This manual provides essential information for the safe and effective operation and maintenance of your CT-520DPL welding machine.

ANDELI CT-520DPL Welder with accessories and dimensions
Figure 1: ANDELI CT-520DPL Multi-Function Welding Machine and Included Accessories

2. Safety Precautions

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or damage to equipment.

  • Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Never operate the machine in wet conditions or near flammable materials.
  • Ensure proper grounding of the machine.
  • Disconnect power before performing any maintenance or changing accessories.
  • Keep children and unauthorized personnel away from the welding area.

3. Product Overview

3.1. Machine Components

Front Panel Introduction
Figure 2: Front Panel Introduction
  • 1. Function Indicator: Displays the currently selected welding/cutting function (TIG, COLD, CUT, MMA).
  • 2. Function Selector: Knob to select between TIG, COLD, CUT, and MMA modes.
  • 3. Display: Digital display for current, time, and other parameters.
  • 4. Auto-storage (M): Memory function to save and recall settings.
  • 5. Parameter Indicator: Shows which parameter is currently being adjusted (e.g., Current, Time, Frequency).
  • 6. Parameter Adjust Knob: Used to increase or decrease parameter values.
  • 7. Parameter Selector: Button to cycle through adjustable parameters.
  • 8. Gas Pressure Regulator: Gauge to monitor and adjust gas pressure.
Rear Panel Connections
Figure 3: Rear Panel Connections
  • Power Switch: Turns the machine ON/OFF.
  • Input Power Cable: Connects the machine to the main power supply (AC 220V).
  • Gas Pressure Adjust Knob: Manual adjustment for gas pressure.
  • Gas Inlet: Connection point for the gas supply hose.
Internal Details Display
Figure 4: Internal Details Display
  • M12 Pneumatic Fittings: For secure gas connections.
  • Built-in Oil-water Separator: Ensures clean gas supply for optimal performance.
  • Gas Pressure Regulator: Integrated component for precise gas flow control.

3.2. Included Accessories

  • Ground Clamp (2M)
  • WP-17F 4M TIG Torch
  • SG-55 4M Plasma Cutting Torch
  • Hose Clamp (x2)
  • Hose Barb (x2)
  • Pyrex Cup Kit
  • Electrode (x10)
  • Tip (x10)
  • Gas Pipe (3M)
  • Welding Wire (3M)
  • Gloves
  • MMA Holder
  • Welding Rod (x5)
  • WP-9F 4M TIG Torch
  • Collet (x10)
  • Nozzle (x10)
  • Tungsten Electrode (x10)
  • Stainless Steel Wire

4. Setup

4.1. Power Connection

  1. Ensure the power switch on the rear panel is in the OFF position.
  2. Connect the input power cable to a suitable AC 220V power outlet.
  3. Ensure the power source meets the machine's requirements (AC 220V ±15%, 50/60Hz).

4.2. Gas Connection

  1. Connect the gas pipe to the Gas Inlet on the rear panel.
  2. Secure the gas pipe using the provided hose clamps.
  3. Connect the other end of the gas pipe to your gas cylinder (e.g., Argon for TIG, Compressed Air for Plasma CUT).
  4. Adjust the gas pressure using the Gas Pressure Adjust Knob on the rear panel and monitor the Gas Pressure Regulator on the front panel.

4.3. Torch and Ground Clamp Connection

  1. Connect the appropriate torch (TIG, Plasma CUT, or MMA holder) to its designated connector on the front panel.
  2. Connect the ground clamp cable to the Negative Pole (-) connector.
  3. Attach the ground clamp securely to the workpiece, ensuring good electrical contact.

5. Operating Instructions

Turn on the machine using the Power Switch on the rear panel. The display will light up.

5.1. General Operation

  • Use the Function Selector to choose your desired welding/cutting mode (TIG, COLD, CUT, MMA).
  • Press the Parameter Selector button to cycle through the adjustable parameters for the selected mode.
  • Use the Parameter Adjust Knob to set the desired value for the selected parameter.
  • The Auto-storage (M) function allows you to save and recall frequently used settings.

5.2. TIG Welding (Tungsten Inert Gas)

TIG Welding Function Introduction
Figure 5: TIG Welding Function and Examples
  • Recommended Material Thickness: 0.8mm - 10mm.
  • Gas Saving: Utilize Per-flow and Post-flow settings to optimize gas consumption.
  • 2T/4T Function: Select between 2-stroke (press and hold for welding) and 4-stroke (press to start, press again to stop) trigger modes for torch control.
  • Applications: Ideal for precise welding of stainless steel, carbon steel, and aluminum (DC TIG for aluminum).

5.3. COLD Welding

COLD Welding Function Introduction
Figure 6: COLD Welding Function and Examples
  • Benefits: Achieves welding without deformation or discoloration, eliminating the need for post-weld polishing.
  • Modes: Supports both Spot Welding and Pulsed Welding for various applications.

5.4. Plasma CUT (Plasma Cutting)

Plasma CUT Function Introduction
Figure 7: Plasma CUT Function and Examples
  • Thickness Selection: Built-in options for 1.0mm, 3.0mm, 5.0mm, and 8.0mm.
  • Cutting Capability: Fast cutting for plates below 10mm thickness. Can limit cut for 10-15mm plates.
  • Max Current: 50A.
  • 2T/4T Function: Available for torch trigger control.
  • Applications: Effective for cutting galvanized sheets, carbon steel plates, and carbon steel pipes.

5.5. MMA Welding (Manual Metal Arc)

MMA Welding Function Introduction
Figure 8: MMA Welding Function and Examples
  • Electrode Selection: Built-in options for 2.0mm, 2.5mm, 3.2mm, and 4.0mm electrodes.
  • Operation: One-click welding with manual current setting.
  • Features: Supports lasting welding with HOT START, ARC FORCE, and ANTI-STICK functions for improved arc stability and ease of use.

6. Maintenance

  • Regularly clean the machine's exterior with a dry cloth to prevent dust buildup.
  • Check all cables and connections for wear, damage, or looseness before each use.
  • Inspect torches and consumables (electrodes, tips, nozzles) for wear and replace as needed.
  • Ensure the cooling fan is free from obstructions to prevent overheating.
  • Store the machine in a dry, clean environment when not in use.

7. Troubleshooting

  • No Power: Check the power cable connection, power switch, and circuit breaker.
  • No Arc: Ensure the ground clamp is securely attached to the workpiece. Check torch connections and consumables. Verify correct welding mode and parameters are selected.
  • Poor Weld Quality: Adjust welding current, voltage, gas flow, or travel speed. Ensure proper electrode/tip selection and cleanliness of the workpiece.
  • Overheating: Allow the machine to cool down. Ensure adequate ventilation and that the cooling fan is not obstructed. Check the duty cycle for the current operation.
  • Gas Flow Issues: Check gas cylinder level, regulator settings, and hose connections for leaks or kinks.

8. Specifications

CT-520DPL Specifications Table
Figure 9: Detailed CT-520DPL Specifications
Function TIG COLD CUT MMA
Rated Input Voltage(V) AC 220±15%
Frequency(Hz) 50/60HZ
Efficiency(%) 80%
Power Factor 0.75
Rated Power(KW) 5.7 5.7 8.1 9.2
Rated Input Current(A) 26 26 37 42
Welding Current Range(A) 5-200 10-200 20-50 10-170
Output Voltage(V) 10.2-18 10.2-18 88-100 20.4-28
No-Load Voltage(V) 64 64 255 64
Rated Duty Cycle (% 40℃ 10min) 40% (200A), 60% (163A), 100% (126A) 40% (200A), 60% (163A), 100% (126A) 40% (50A), 60% (41A), 100% (32A) 40% (200A), 60% (163A), 100% (126A)
Cold Welding Time(MS) / 1-200 / /
Cold Welding Interval(Hz) / 0-10 / /
Pre-Flow Time(S) 0-1 / / /
Start current 5-200 / / /
Rise Time(S) 0-5 / / /
Peak Current(A) 200 / / /
Pulse Frequency(Hz) 0.5-100 / / /
Base Current(A) 5-200 / / /
Down Time(S) 0-5 / / /
Crater Current(A) 5-200 / / /
Post-Flow Time(S) 1-10 0-10 / /
Welding Thickness 0.8-12 mm / 1-15 mm 2-12 mm
Protection Class IP21S
Insulation Class H
Cooling FAN
Dimension(MM) 430x172x250
Net Weight(KG) 10.7

9. User Tips

  • For TIG welding, always ensure your tungsten electrode is properly ground to a sharp point for optimal arc stability.
  • When plasma cutting, maintain a consistent standoff distance between the torch and the workpiece for a clean cut.
  • In MMA mode, experiment with different electrode types and sizes to find the best match for your material and desired weld characteristics.
  • Regularly check and clean the oil-water separator to ensure a dry and clean air supply for plasma cutting, which extends consumable life.

10. Warranty and Support

The ANDELI CT-520DPL Multi-Function Welding Machine comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For warranty claims, technical support, or any questions regarding your product, please contact the seller or authorized service center. Please retain your proof of purchase for warranty validation.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.