POSEIDON Wireless Tattoo Pen Kit User Manual

1. Introduction

Thank you for choosing the POSEIDON Wireless Tattoo Pen Kit. This kit is designed for professional embroidery tattooing and permanent makeup applications, offering quiet stability, strong motor performance, and a comfortable user experience. This manual provides detailed instructions for the safe and effective use of your new tattoo kit.

2. Package Contents

Please check the package to ensure all items are present:

• Tattoo Pen (1 unit)
• Tattoo Wireless Power Supply (1 unit)
• Tattoo Cartridge Needles (20 units)
• 5cm Black Bandage (1 unit)
• Tattoo Clean Pad (4 units)
• Gloves (1 Pair)
• Tattoo Transfer Paper (4 units)
• Tattoo Practice Leather (1 unit)
• Tattoo Repair Patch (1 unit)
• Tattoo Ink Cups: Medium size (20 units) / Small-sized (20 units)
• Colors Tattoo Ink (10 bottles)
• POSEIDON Black Tattoo Ink (1 bottle)
• Blue Algae (1 bottle)

3. Specifications

4. Setup

4.1 Assembling the Tattoo Pen and Power Supply

1. Ensure both the tattoo pen and the wireless power supply are clean and sterilized.
2. Align the connector of the wireless power supply with the input port on the tattoo pen.
3. Gently twist or push the power supply onto the pen until it is securely attached.

4.2 Attaching the Needle Cartridge

1. Select the appropriate tattoo cartridge needle for your work.
2. Carefully insert the needle cartridge into the front end of the tattoo pen, twisting slightly until it locks into place.
3. Adjust the needle depth by rotating the grip of the tattoo pen.

4.3 Initial Charging

Before first use, ensure the wireless power supply is fully charged. Use the provided Type-C cable to connect the power supply to a suitable USB power adapter.

4.4 Setup Demonstration Video

Watch this video for a visual guide on assembling and operating your tattoo kit:

5. Operation

5.1 Power On/Off

• To turn ON/OFF the device, press and hold the Power button for 1.5 seconds.
• To start the motor and begin time measurement, press the Power button briefly.
• To pause the motor, press the Power button briefly. Press again to resume.

5.2 Voltage Adjustment

• Use the '+' and '-' buttons to adjust the voltage in 0.1V increments.
• Hold down the '+' or '-' button for continuous voltage adjustment.
• The voltage range is 4.0V to 12.0V. The standard default speed is 8V.

5.3 Strong Start Mode

• After turning on the device, double-press the function buttons to activate the Strong Start Mode.
• In this mode, the device will operate at maximum speed for 0.5 seconds before returning to the previously set voltage.

5.4 Screen Display and Functions

The HD color screen displays important information:

• Operating Voltage: Shows the current voltage setting.
• Charge: Indicates the battery level.
• Power Switch: Controls the device's power and motor.
• Reduce/Raise Voltage: Buttons for adjusting voltage.

• The screen will automatically turn off after 10 seconds of inactivity to save power.
• The device will enter sleep mode after 5 minutes of inactivity.
• A low battery warning will flash on the screen when the battery level is critical.

5.5 Charging

• The device supports Type-C charging.
• You can use the device while it is charging. The screen will display a charging symbol, and the actual battery level will be shown once charging is complete or paused.

6. Maintenance

• Cleaning: After each use, thoroughly clean the tattoo pen and power supply with appropriate sterilization solutions. Ensure no ink or debris remains.
• Needle Disposal: Always dispose of used needle cartridges in a designated sharps container.
• Storage: Store the kit in a clean, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the power supply frequently. Charge it regularly, even if not in use for extended periods.

7. Troubleshooting

If you encounter any other issues not listed here, please refer to the warranty and support section for further assistance.

8. User Tips

No specific user tips from reviews or Q&A were provided for this product. However, general best practices for tattoo equipment include:

• Always perform a test on practice skin before working on a client.
• Ensure proper needle depth and voltage settings for different skin types and tattoo styles.
• Maintain a clean and sterile working environment to prevent cross-contamination.
• Regularly check for wear and tear on components and replace them as needed.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the POSEIDON customer service team through your point of purchase. Keep your purchase receipt as proof of purchase.

WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

The appliance must only be supplied at safety extra-low voltage corresponding to the marking on it.