MICTUNING BC80 8-Gang Wireless Switch Panel

Contents

MICTUNING BC80 8-Gang Wireless Switch Panel

User Manual

Model: BC80 8-Gang Wireless Switch Panel

Brand: MICTUNING

1. Introduction

The MICTUNING BC80 8-Gang Wireless Switch Panel provides a streamlined solution for controlling multiple auxiliary devices in your vehicle. Featuring truly wireless control and dual power hubs, it eliminates messy wiring and offers flexible placement. This manual will guide you through the setup, operation, and maintenance of your BC80 system.

2. Package Contents

Please verify that all items listed below are included in your package:

  • Switch Panel: 1
  • Power Hub: 2
  • 140 Stickers: 1
  • User Manual: 1
  • Bracket: 1
  • USB Cable: 1
  • Wires: 2
  • Spare Fuses: 8
  • AAA Batteries: 2
  • Screws: 10
  • Screwdriver: 1
Complete package contents of the MICTUNING BC80 Wireless Switch Panel, showing the switch panel, two power hubs, stickers, wires, fuses, batteries, screwdriver, and bracket.
Figure 2.1: Complete Package Contents

3. Specifications

FeatureSpecification
Model NameBC80 8-Gang Wireless Switch Panel
Special FeaturesTruly Wireless Control
Product TypeSwitches and accessories
Item TypeSwitch panel
Working Voltage12V/24V DC
Max Current60A
Max Power720W@12V, 1440W@24V
Operating Temperature-22°F to 185°F (-30°C to 85°C)
Wireless RangeUp to 164 feet
Power Hub DimensionsApprox. 4.3in (length) x 2.5in (width)
Switch Panel DimensionsApprox. 6.1in (length) x 1.4in (width)
Image showing the wireless range of 164 feet, switch panel dimensions (6.1 inches long, 1.4 inches wide), and key specifications like DC 12V/24V input voltage, 720W@12V / 1440W@24V max power, and 60A max current.
Figure 3.1: Wireless Range and Dimensions
Image detailing compact and powerful specifications: 12-24V input voltage, -22°F to 185°F operating temperature, 60A max current, and 720W@12V / 1440W@24V max power.
Figure 3.2: Compact & Powerful Specifications

4. Setup

4.1 Powering the Switch Panel

The wireless switch panel can be powered in two ways:

  • AAA Batteries: Insert two AAA batteries into the battery compartment on the back of the switch panel.
  • USB Charging: Connect the provided USB cable to the USB port on the switch panel. When plugged in, the panel will run on USB power. The batteries will act as an instant backup if the USB power is disconnected.
Video 4.1: Product Demonstration (includes power options and control modes)

4.2 Power Hub Connection

The power hubs are the central connection points for your auxiliary devices. Each power hub features a 4-circuit fuse block.

  1. ACC Connection (Recommended): The power hub typically requires an ACC (Accessory) connection for normal operation. This ensures the power hub is only active when your vehicle's ignition is on, preventing battery drain.
  2. Direct Battery Connection (Optional): If vehicle battery drain is not a concern, the power hub may also be connected directly to the battery positive terminal. Exercise caution to avoid draining your vehicle's battery.
  3. Connect your auxiliary devices to the corresponding circuits on the power hub using the provided terminal connectors. Ensure correct polarity.
Wiring diagram for a dual battery system showing two power hubs. Each power hub connects to a battery (or ACC) and has four circuits for devices like LED headlights, wheel lights, whip lights, driving lights, light bars, and underglow lights.
Figure 4.1: Dual Battery System Wiring Diagram
Detailed 4-gang power hub wiring diagram showing positive and negative terminals, and four circuits with fuse ratings: Circuit 1 (10A), Circuit 2 (20A), Circuit 3 (10A), Circuit 4 (20A). An ACC connection is also shown.
Figure 4.2: 4-Gang Power Hub Wiring Diagram

4.3 Mounting

Use the provided bracket and screws to securely mount the switch panel in a convenient location within your vehicle. The power hubs can be flexibly placed at both the front and rear of the vehicle, ideal for dual-battery setups.

Before and after image showing how the power hub helps organize messy wiring, labeled 'NO MORE MESS'.
Figure 4.3: Organized Wiring with Power Hub
Before and after image demonstrating how the power hub helps clean up the engine bay, labeled 'CLEAN THE ENGINE BAY'.
Figure 4.4: Clean Engine Bay with Power Hub

5. Operating Instructions

5.1 Basic On/Off Operation

  1. Standby State: Press any two buttons on the panel at the same time. The white backlight will light up, indicating that the panel has entered standby mode.
  2. Working State: From the standby state, press any single button. The yellow indicator for that button will light up, indicating that the corresponding device is in its working state.
  3. Power Off: To power off the switch panel, press any two buttons again at the same time. All indicators will turn off.

5.2 Pairing the Switch Panel with Power Hubs

The BC80 allows one switch panel to connect with up to two power hubs, assigning the first four switches to one hub and the last four to another. Each group of four switches can also be connected to up to 3 power hubs for controlling multiple vehicles.

Easy pairing instructions: 1. Press the pairing button on the power hub. 2. Press any one of the first 4 switches on the panel. 3. Power hub's indicator flashes then goes off, indicating successful pairing. Note: Same actions to pair the last 4 switches with another power hub.
Figure 5.1: Easy Pairing Steps
How to pair the switch panel with a power hub, showing the pairing button on the power hub and pressing one of the switches on the panel. The power hub's indicator flashes and turns off upon successful pairing.
Figure 5.2: Pairing Process

Pairing Group 1 (First Four Switches)

  1. Ensure both the Switch Panel and Power Hub 1 are powered on. Turn on the switch panel by short pressing any two switches.
  2. Press the Pairing Button on Power Hub 1. The power hub's indicator light will illuminate, indicating it's in pairing state.
  3. Press any one of the first four switches on the Switch Panel.
  4. When Power Hub 1's indicator flashes and then goes off, pairing is successful. The first four switches are now linked to Power Hub 1.

Pairing Group 2 (Last Four Switches)

  1. Ensure both the Switch Panel and Power Hub 2 are powered on. Turn on the switch panel by short pressing any two switches.
  2. Press the Pairing Button on Power Hub 2. The power hub's indicator light will illuminate, indicating it's in pairing state.
  3. Press any one of the last four switches on the Switch Panel.
  4. When Power Hub 2's indicator flashes and then goes off, pairing is successful. The last four switches are now linked to Power Hub 2.

Note: Each panel group (first four switches or last four switches) can be paired with up to three power hubs, allowing for extensive control over multiple devices or vehicles.

Image showing three vehicles, each with a wireless signal icon, illustrating that one switch panel can control up to three devices or vehicles.
Figure 5.3: One Switch Panel Controls Multiple Devices

5.3 Setting Control Modes

The BC80 offers four control modes: Flash, Strobe, Momentary, and Toggle. You can customize the mode for each individual switch.

Four control modes: Flash (car turn signal), Toggle (Jeep light bar), Momentary (car horn), Strobe (strobe light).
Figure 5.4: Four Control Modes
Demonstration of four control modes on a switch panel: Constant Light, Strobe, Flash, and Momentary, with corresponding light cube examples.
Figure 5.5: Control Mode Demonstration
  1. Enter Setting State: Long press any two switches together until all indicators on the panel light up or flash. This indicates you have entered the setting state.
  2. Assign Modes to Switches: For each switch, press it repeatedly to cycle through the available modes. The indicator status will change to reflect the current mode:
    • Slow flashes: Flash mode
    • Rapid flashes: Strobe mode
    • Light off: Momentary mode (light only on while pressed)
    • Light on: Toggle mode (on/off with each press)
  3. Save Your Setting: Once you have set all desired modes, long press any two switches together again until all indicators flash and then turn off. This saves your settings.

Note: After saving settings, please wait for at least 2 seconds before turning off the panel to ensure the settings are properly saved.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the switch panel and power hubs. Avoid using harsh chemicals or abrasive cleaners.
  • Fuse Replacement: The power hubs are equipped with individual fuses for each circuit. If a device stops working, check the corresponding fuse on the power hub. Replace blown fuses with spare fuses of the correct amperage (10A or 20A as per the wiring diagram).
  • Battery Replacement: If the switch panel's wireless performance degrades or it fails to power on without USB, replace the AAA batteries.
  • Firmware Updates: Check the official MICTUNING website or app for any available firmware updates for enhanced performance or new features.

7. Troubleshooting

  • Switch Panel Not Powering On:
    • Ensure AAA batteries are correctly inserted and not depleted.
    • Verify the USB cable is securely connected and receiving power.
  • Devices Not Responding:
    • Check if the switch panel is powered on and in working state.
    • Confirm the power hub is correctly connected to the vehicle's power source (ACC or battery).
    • Verify that the switch panel is properly paired with the correct power hub (Group 1 with Power Hub A, Group 2 with Power Hub B). Re-attempt pairing if necessary.
    • Inspect the wiring connections between the power hub and the auxiliary device.
    • Check the fuses on the power hub for any blown fuses and replace them if needed.
    • Ensure the control mode for the specific switch is set as desired (Toggle, Momentary, etc.).
  • Pairing Failure:
    • Ensure both the switch panel and the power hub are powered on before initiating pairing.
    • Follow the pairing steps precisely, ensuring the power hub's indicator lights up when its pairing button is pressed.
    • Ensure you are pressing a switch from the correct group (first four for Power Hub 1, last four for Power Hub 2).
  • Missing Parts: If you find any parts missing from your package, please refer to the 'Package Contents' section and contact MICTUNING customer support for assistance.

8. User Tips

  • Customization: Use the included 140 stickers to label your switches for easy identification of controlled devices.
  • Flexible Placement: Take advantage of the dual power hubs for flexible installation. Place one hub near the front of your vehicle for front-mounted accessories and another near the rear for rear-mounted accessories, especially useful for dual-battery vehicles.
  • Expandability: If you need to control more than 8 devices or manage accessories across multiple vehicles, remember that each group of four switches can be paired with up to three power hubs. Additional power hubs can be purchased separately.
  • PDF Manual: A detailed user manual in PDF format is available for download. You can find it by searching for 'MICTUNING BC80 User Manual PDF' online or by visiting the official MICTUNING support page.

9. Warranty and Support

MICTUNING products are designed for quality and reliability. For warranty information, technical support, or any questions not covered in this manual, please visit the official MICTUNING website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

© 2024 MICTUNING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.