PowMr POW-HVM2H-12V-N, POW-HVM3.2H-24V-N

Contents

PowMr Hybrid Solar Inverter User Manual

Models: POW-HVM2H-12V-N, POW-HVM3.2H-24V-N

Brand: PowMr

1. Introduction

This document serves as a comprehensive instruction manual for the PowMr Hybrid Solar Inverter, available in 2KW 12V (POW-HVM2H-12V-N) and 3.2KW 24V (POW-HVM3.2H-24V-N) models. This multi-function inverter/charger integrates the functionalities of an inverter, solar charger, and battery charger into a compact unit, providing reliable uninterruptible power support.

The user-friendly LCD display allows for configurable settings and easy operation, including battery charging current, AC/solar charger priority, and acceptable input voltage ranges suitable for various applications. The inverter offers a pure sine wave output and bypass output, ensuring stable power delivery.

Two PowMr Hybrid Solar Inverters, one 2KW 12V and one 3.2KW 24V model, shown side-by-side.
Figure 1: PowMr Hybrid Solar Inverters (2KW and 3.2KW models)

2. Key Features

  • Pure sine wave inverter output.
  • Configurable input voltage range for home appliances and personal computers via LCD settings.
  • Configurable battery charging current based on applications via LCD settings.
  • Configurable AC/Solar Charger priority via LCD settings.
  • Compatible with utility voltage or generator power.
  • Automatic restart function when AC power is restored.
  • Comprehensive protection against overuse, over-temperature, and short circuits.
  • Smart battery charger design for optimized battery performance.
  • Cold start function.
  • Optional WIFI/GPRS monitoring capability (WIFI module not included).
  • Supports connection to various battery types, including Lithium, Flooded, Gel, Lead-acid, and AGM batteries.

3. Product Overview

Familiarize yourself with the components and connections of your PowMr Hybrid Solar Inverter.

Labeled diagram of the inverter's front and rear panels, showing LCD Display, Status Indicator, Charging Indicator, Fault Indicator, Function Buttons, Power On/Off Switch, AC Input, AC Output, PV Input, Battery Input, and Communication Port.
Figure 2: Inverter Components and Ports

3.1. Component Identification

  1. LCD Display
  2. Status Indicator
  3. Charging Indicator
  4. Fault Indicator
  5. Function Buttons
  6. Power On/Off Switch
  7. AC Input
  8. AC Output
  9. PV Input
  10. Battery Input
  11. Communication Port
Close-up of the inverter's LCD display, LED indicators, and function keys, along with a table explaining LED indicator messages and function key descriptions.
Figure 3: LCD Display, LED Indicators, and Function Keys

3.2. LED Indicators

LED Indicator Messages
AC / INV (Green) Solid On: Output is powered by utility in Line mode.
Flashing: Output is powered by battery or PV in battery mode.
CHG (Green) Solid On: Battery is fully charged.
Flashing: Battery is charging.
FAULT (Red) Solid On: Fault occurs in the inverter.
Flashing: Warning condition occurs in the inverter.

3.3. Function Keys

Function Key Description
ESC To exit setting mode
UP To go to previous selection
DOWN To go to next selection
ENTER To confirm the selection in setting mode or enter setting mode

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your solar inverter. It is recommended that installation be performed by a qualified professional.

4.1. Unboxing and Inspection

Upon receiving your inverter, carefully unbox it and inspect for any physical damage. Ensure all components listed in the packing list are present. The package typically includes the inverter unit and a user manual.

Video 1: Product Unboxing and Overview

4.2. Mounting the Inverter

Mount the inverter in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure sufficient clearance around the unit for proper airflow, especially for the cooling fans.

Diagram showing the internal intelligent cooling fan system of the solar inverter, with text explaining it adjusts fan speed based on ambient temperature.
Figure 4: Intelligent Cooling Fan System

4.3. Wiring Connections

Connect the solar panels (PV input), batteries (Battery Input), AC utility power (AC In), and AC loads (AC Out) according to the wiring diagrams provided. Pay close attention to polarity and ensure all connections are secure to prevent electrical hazards.

Wiring diagrams for 12V and 24V hybrid power systems, showing connections between solar panels, inverter, battery (12V Lithium/Lead-Acid or 24V Lithium/Lead-Acid), utility grid, generator, and home appliances.
Figure 5: Hybrid Power System Wiring Diagrams

The inverter supports various battery types. Ensure your battery system voltage matches the inverter model (12V for POW-HVM2H-12V-N, 24V for POW-HVM3.2H-24V-N).

An optional WIFI module can be connected to the communication port for remote monitoring and parameter changes. Note that the WIFI module is not included in the standard package.

Diagram showing the inverter with an optional WIFI module connected to its communication port, illustrating how it enables real-time performance monitoring and parameter changes via a smartphone app.
Figure 6: WIFI Monitoring Setup (Optional)

5. Operating Modes

The inverter offers multiple charging and load output modes to suit different energy management needs.

Diagram illustrating four charging modes (Solar First, Utility First, Solar and Utility, Only Solar) and three load output working modes (Utility First, Solar First, SBU First).
Figure 7: Charging and Load Output Modes

5.1. Charging Modes

  • Solar First: Prioritizes solar power for charging batteries.
  • Utility First: Prioritizes utility power for charging batteries.
  • Solar and Utility: Uses both solar and utility power to charge batteries.
  • Only Solar: Charges batteries exclusively from solar power.

5.2. Load Output Working Modes

  • Utility First: Prioritizes utility power to supply loads.
  • Solar First: Prioritizes solar power to supply loads.
  • SBU First (Solar-Battery-Utility): Prioritizes solar, then battery, then utility power to supply loads.

These modes can be configured via the LCD display using the function buttons.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Keep the inverter's exterior clean and free from dust. Ensure ventilation openings are not blocked.
  • Connection Checks: Periodically inspect all wiring connections (PV, battery, AC input/output) for tightness and signs of corrosion.
  • Ventilation: Ensure the inverter is in a well-ventilated area to prevent overheating. The intelligent cooling fan system helps regulate internal temperature.
  • Battery Health: Monitor battery voltage and performance regularly, especially for lead-acid batteries, to ensure they are within optimal operating parameters.

7. Troubleshooting

If you encounter issues with your inverter, refer to the LED indicators and the following general troubleshooting steps:

  • No Power: Check all power connections, including AC input, battery, and PV input. Ensure the Power On/Off switch is in the 'On' position.
  • Fault Indicator (Red Solid On): This indicates a fault. Refer to the specific fault codes (if available in the full manual) or contact technical support.
  • Fault Indicator (Red Flashing): This indicates a warning. Check for conditions like overload, over-temperature, or low/high voltage.
  • No Output Power: Verify that the AC output connections are secure and that no overload condition is present. Check the battery charge level.
  • No Charging: Ensure solar panels are receiving adequate sunlight and are properly connected. Check AC input if using utility charging. Verify battery connections.

The inverter is equipped with multiple protection functions to safeguard the system:

List of multi-protection functions: Short-circuit Protection, Surge Protection, Overload Protection, Over-Temp Protection, Low Voltage Protection, High Voltage Protection, Cold Start Function.
Figure 8: Multi-Protection Functions

8. Specifications

8.1. General Specifications

Feature POW-HVM2H-12V-N (2KW 12V) POW-HVM3.2H-24V-N (3.2KW 24V)
Rated Output Power2KVA/1.6KW3.2KVA/3.0KW
Output TypeSINGLE
Output Voltage Regulation230VAC ± 5%
Output Frequency50Hz/60Hz (self-detection)
Power Supply WaveformPure Sine Wave
Peak Efficiency94%
Surge Capacity2 * rated power for 5 seconds
No Load Power Consumption<25W<35W
Dimensions (D*W*H)348X270X95mm (from product properties), 357X273X95mm (from table)
Net Weight4.6kg4.8kg
Operating Temperature Range-10 °C to 55 °C
Storage Temperature-15 °C ~ 60 °C
CertificationCE
Is Smart DeviceYes (With WIFI)
ApplicationHome solar system
Compatible Battery TypesLithium Batteries, Flooded Batteries, Gel Batteries, Lead-acid Batteries, AGM Batteries

8.2. Line Mode Specifications

Feature POW-HVM2H-12V-N (2KW 12V) POW-HVM3.2H-24V-N (3.2KW 24V)
Input Voltage WaveformPure Sine Wave (Utility or Generator)
Nominal Input Voltage230VAC
Max AC Input Voltage300VAC
Efficiency (Line Mode)> 95% (Rated load, battery full charged)
Transfer Time10ms typical (UPS); 20ms typical (Appliances)

8.3. Charge Mode Specifications

Feature POW-HVM2H-12V-N (2KW 12V) POW-HVM3.2H-24V-N (3.2KW 24V)
Charging Algorithm3-Step
Max AC Charging Current60A
Max. PV Array Power2000W3000W
Max. PV Array Open Circuit Voltage400VDC
PV Array MPPT Voltage Range30 ~ 400VDC
Max Charging Current (AC + Solar)80A
Nominal DC Input Voltage12VDC24VDC
Cold Start Voltage11.5VDC23.0VDC
Low DC Warning Voltage11.0VDC22.0VDC
Low DC Warning Return Voltage11.5VDC22.5VDC
Low DC Cut-off Voltage10.2VDC20.5VDC
High DC Recovery Voltage14.0VDC32VDC
High DC Cut-off Voltage16.0VDC33VDC

9. User Tips

  • Battery Compatibility: Ensure your battery type is correctly configured in the inverter settings for optimal charging and discharge cycles. This is especially important for lithium batteries.
  • Ventilation: Always ensure adequate airflow around the inverter. Overheating can reduce efficiency and lifespan.
  • Monitoring: Consider purchasing the optional WIFI module for remote monitoring of your system's performance and to adjust settings conveniently via a smartphone app.
  • Load Management: Be mindful of the inverter's rated output power to avoid overloading, which can trigger protection mechanisms and interrupt power supply.

10. Warranty and Support

The PowMr Hybrid Solar Inverter comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact your seller or PowMr customer service. Ensure you have your product model number and purchase details readily available.

The product is CE certified, indicating compliance with European health, safety, and environmental protection standards.

CE Certificate of Conformity for POW-HVM2H-12V-N and POW-HVM3.2H-24V-N models, issued by EMTEK.
Figure 9: CE Certificate of Conformity

© 2024 PowMr. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.