KATO N-Type 700T Taiwan High-Speed Rail Model Train Instruction Manual

Introduction

Thank you for purchasing the KATO N-Type 700T Taiwan High-Speed Rail model train set. This highly detailed 12-section model is designed for enthusiasts and collectors, offering a realistic representation of the iconic 700T series. This manual provides essential information for setting up, operating, and maintaining your model train to ensure years of enjoyment.

Important Safety Warnings

⚠️ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This product is recommended for ages 14+y and 18+. Keep out of reach of small children due to small parts which may pose a choking hazard.

Package Contents

Your KATO N-Type 700T model train set includes the following components:

• 12-section KATO 700T Taiwan High-Speed Rail train model (N-type, 1:160 scale)
• Instruction Manual

Specifications

Note: Japanese N-scale trains are typically 1:150, while European N-scale trains are typically 1:160. The track gauge remains 9mm for both. This model is not compatible with HO-scale train models.

Setup Instructions

To set up your KATO N-Type 700T model train, you will need a compatible N-scale track, a power supply, and a controller. This product does not include display rails, power supply, or controller.

Required Components for Operation:

• Powered car head (locomotive)
• N-scale Metal Track
• Controller (including power supply)
• Connecting wire

Assembly Steps:

1. Prepare the Track: Lay out your N-scale metal track on a stable, flat surface according to your desired layout. Ensure all track sections are securely connected.
2. Connect Power and Controller: Connect the power supply to your controller. Then, connect the controller to the metal track using the provided connecting wire. The power supply and signal are transmitted to the metal wheels of the train via the metal track.
3. Place the Train: Carefully place the 12-section KATO 700T train model onto the track. Ensure all wheels are properly seated on the rails. The locomotive (powered car head) contains the motor and does not require separate batteries.
4. Verify Connections: Double-check all connections to ensure they are secure and correctly wired.

Operation

Once your KATO N-Type 700T train set is properly assembled on the track and connected to a power source and controller, you can begin operation:

1. Power On: Turn on the power supply to your controller.
2. Control Speed and Direction: Use the controls on your model train controller to adjust the speed and direction of the train. The controller sends signals through the track to the locomotive's motor.
3. Observe Operation: Watch your train run smoothly along the track. Ensure there are no obstructions and that all sections are moving correctly.

General N-Scale Model Train Operation Demonstration

Maintenance

Regular maintenance will help preserve the performance and appearance of your KATO N-Type 700T model train:

• Cleaning Wheels and Track: Periodically clean the wheels of your train and the surface of the track with a soft, lint-free cloth. For stubborn dirt, use a specialized model train track cleaner. Clean tracks ensure good electrical contact and smooth operation.
• Lubrication: Refer to the KATO specific maintenance guidelines (if provided in the included manual) for lubrication points on the locomotive's moving parts. Use only lubricants designed for model trains.
• Storage: When not in use, store the train set in its original packaging or a dust-free display case to protect it from dust and damage. Avoid exposing the model to direct sunlight or extreme temperatures.
• Handling: Always handle the train sections carefully, holding them by the body rather than delicate details.

Troubleshooting

If you encounter issues with your KATO N-Type 700T model train, consider the following common troubleshooting steps:

• Train Not Moving:
  • Check if the power supply is on and connected correctly to the controller and track.
  • Ensure all track sections are properly joined and making good electrical contact.
  • Verify that the train's wheels are clean and properly seated on the rails.
  • Inspect the locomotive for any visible damage or obstructions to its moving parts.
• Erratic Movement/Stuttering:
  • Clean the track and train wheels thoroughly. Dirt and debris can interfere with electrical conductivity.
  • Ensure the track is laid flat and all connections are tight.
  • Check for any loose wires or connections between the controller and track.
• Derailment:
  • Ensure track sections are perfectly aligned and level.
  • Check for any bent or damaged wheels on the train cars.
  • Slow down the train, especially on curves, to prevent derailment.

User Tips

• Expand Your Layout: N-scale models are known for their compact size, allowing for intricate and expansive layouts in smaller spaces. Consider adding scenery, buildings, and other rolling stock to enhance your railway world.
• Digital Command Control (DCC): For advanced control and independent operation of multiple locomotives, explore upgrading to a Digital Command Control (DCC) system.
• Gentle Handling: Model trains, especially N-scale, are delicate. Always handle them with care to avoid damaging small details or mechanisms.
• Regular Cleaning: A clean track and clean wheels are paramount for reliable operation. Make it a habit to clean them before each operating session.

Warranty and Support

For specific warranty information, please refer to the documentation included with your product or contact the retailer where you purchased the item. KATO is renowned for its quality model trains, and any manufacturing defects should be addressed promptly.

For further assistance, technical support, or inquiries about replacement parts, please contact KATO customer service or your authorized KATO dealer.