DAKEFPV VTX 4.9G-5.8G Series

Contents

DAKEFPV FPV Video Transmitter User Manual

Models: Ultra1600 VTX (1.6W), Ultra2500 VTX (2.5W)

1. Introduction

The DAKEFPV VTX is a high-power FPV video transmitter designed for long-range drone applications. It features multiple power levels, a robust cooling structure, and supports IRC Tramp protocol for OSD parameter adjustment. This manual provides detailed instructions for the setup, operation, and maintenance of your DAKEFPV VTX.

2. Features

  • High Power Output: Available in 1.6W and 2.5W versions, suitable for long-range flights with excellent stability.
  • Multiple Power Levels: Six selectable power levels including 25mW, 200mW, 400mW, 800mW, 1500mW (2.5W model only), 1600mW (1.6W model only), and Pit mode.
  • Advanced Cooling: Two-layer board cooling structure with separate power BEC and main-board for reduced interference and efficient heat dissipation.
  • Temperature Control: Integrated temperature control protection to prevent overheating.
  • Wide Voltage Input: Supports DC 7V-36V input (compatible with 2-8S LiPo batteries).
  • IRC Tramp Protocol: Supports OSD parameter adjustment via IRC Tramp protocol.
  • Built-in Microphone: Provides real-time audio feedback from the drone.
  • 64 Channels: Features 3 regional frequency tables to meet diverse regional requirements.
  • User-Friendly Interface: One function button and three indicator lights for easy operation.
  • Standard Mounting: 30.5mm x 30.5mm (M3) mounting holes for easy integration.

3. Specifications

3.1. Ultra1600 VTX (1.6W)

Specifications for DAKEFPV Ultra1600 VTX

Image: Specifications for the DAKEFPV Ultra1600 VTX, detailing input voltage, output, impedance, protocol, connectors, power, channels, video format, microphone, size, weight, and mounting holes.

ParameterValue
ModelUltra1600 VTX 4.9G-5.8G 1.6W
Input VoltageDC 7-36V (2-8S Battery)
Output5V@600mA (Power 5V to camera)
Input Impedance75 Ω
ProtocolIRC Tramp
Antenna ConnectorMMCX connector
Cable ConnectorGH1.25-6P connector
Output Power25mW/200mW/400mW/800mW/1600mW/Pit mode
Frequency Tables64 CH
Video FormatPAL / NTSC
MicrophoneBuilt in microphone
Size36.5mm x 36.5mm x 12mm
Weight15g (without cable)
Mounting Holes30.5mm x 30.5mm (M3)

3.2. Ultra2500 VTX (2.5W)

Specifications for DAKEFPV Ultra2500 VTX

Image: Specifications for the DAKEFPV Ultra2500 VTX, detailing input voltage, output, impedance, protocol, connectors, power, channels, video format, microphone, size, weight, and mounting holes.

ParameterValue
ModelUltra2500 VTX 4.9G-5.8G 2.5W
Input VoltageDC 7-36V (2-8S Battery)
Output5V@600mA (Power 5V to camera)
Input Impedance75 Ω
ProtocolIRC Tramp
Antenna ConnectorMMCX connector
Cable ConnectorGH1.25-6P connector
Output Power25mW/400mW/800mW/1500mW/2500mW/Pit mode
Frequency Tables64 CH
Video FormatPAL / NTSC
MicrophoneBuilt in microphone
Size36.5mm x 36.5mm x 12mm
Weight15g (without cable)
Mounting Holes30.5mm x 30.5mm (M3)

4. Package Contents

The DAKEFPV VTX package typically includes:

  • DAKEFPV VTX Unit (Ultra1600 or Ultra2500)
  • GH1.25-6P Cable Connector
  • MMCX to SMA/RP-SMA Adapter Cable (Antenna not included in basic package)
DAKEFPV VTX package contents

Image: The DAKEFPV VTX unit, connection cable, and antenna adapter.

5. Safety Precautions

  • Antenna Installation: Always install the antenna before powering on the VTX. Operating without an antenna can permanently damage the unit.
  • Overheating: To prevent overheating, ensure constant airflow and a well-ventilated environment. Consider installing a cooling fan if operating in confined conditions or at higher power levels.
  • 5V Output: The 5V output port is exclusively for powering a camera or a cooling fan. Do NOT connect the main power input or battery directly to the 5V output port, as this will damage the VTX.
  • Voltage Range: Ensure your power source (battery) voltage is within the specified 7V-36V range.

6. Setup and Wiring

6.1. VTX Layout

DAKEFPV VTX1600 top view with heatsink

Image: Top view of the DAKEFPV VTX1600 showing the heatsink and connection points.

DAKEFPV VTX2500 top view with heatsink

Image: Top view of the DAKEFPV VTX2500 showing the heatsink and connection points.

DAKEFPV VTX side view with buttons

Image: Side view of the DAKEFPV VTX, highlighting the function button and indicator lights.

6.2. JST Connection Diagram

The VTX uses a GH1.25-6P JST connector for power, video, and IRC Tramp control. Refer to the diagrams below for correct wiring.

DAKEFPV VTX2500 JST Connection Diagram

Image: Wiring diagram for the DAKEFPV VTX2500, showing connections for power (BAT), ground (GND), 5V output, IRC, and video signals via the JST connector.

DAKEFPV VTX1600 JST Connection Diagram

Image: Wiring diagram for the DAKEFPV VTX1600, showing connections for power (BAT), ground (GND), 5V output, IRC, and video signals via the JST connector.

WARNING:

  • Install antenna before use.
  • To prevent overheating, provide constant airflow and a well-ventilated environment. Install a cooling fan if operating in confined conditions.
  • The 5V Output is just used for a Camera/Cooling Fan! Do NOT connect Power Input / Battery to 5V Output port. Otherwise the VTX will be damaged.

7. Operating Instructions

7.1. Setting Channel, Band, and Power

The DAKEFPV VTX features a single function button and three indicator lights (Blue for Channel, Green for Band, Red for Power) for easy configuration.

How to set Channel, Band, and Power on DAKEFPV VTX

Image: Diagram illustrating the button press sequences and LED indicators for setting channel, band, and power levels.

  1. How to set Channel: Press and hold the button for 2 seconds to enter Channel Selection mode. The Blue LED will start flashing. Short press the button for 1 second to cycle through the available channels (CH1-CH8). The number of flashes corresponds to the channel number (e.g., Flash 1X for CH1, Flash 8X for CH8).
  2. How to set Band: Press and hold the button for 2 seconds to enter Band Selection mode. The Green LED will start flashing. Short press the button for 1 second to cycle through the available bands (Boscam_A, Boscam_B, Boscam_E, FATSHARK, Race Band, Boscam_D, LOWRACE, Boscam_X). The number of flashes corresponds to the band selection.
  3. How to set Power: Press and hold the button for 2 seconds to enter Power Selection mode. The Red LED will start flashing. Short press the button for 1 second to cycle through the available power levels (25mW, 200mW, 400mW, 800mW, 1500mW/2500mW, Pit mode). The number of flashes corresponds to the power level.

7.2. Remote Control (OSD Parameter Adjustment)

The VTX supports IRC Tramp protocol, allowing for OSD (On-Screen Display) parameter adjustment via your flight controller and remote control. This typically involves using your remote control's sticks to navigate menus displayed on your FPV goggles or monitor.

Remote control stick commands for OSD navigation

Image: Example remote control stick commands (Mode-2) for OSD navigation, including changing selection and editing setting values.

Refer to your flight controller's documentation (e.g., Betaflight) for specific instructions on enabling and using IRC Tramp for VTX control.

7.3. Frequency Table

The VTX supports 64 channels across various bands. The full frequency table is provided below:

DAKEFPV VTX Frequency Table

Image: Comprehensive frequency table for the DAKEFPV VTX, listing channels CH1-CH8 across various bands like Boscam_A, Boscam_B, Boscam_E, FATSHARK, Race Band, Boscam_D, Low Race, and Boscam_X.

ChannelCH1CH2CH3CH4CH5CH6CH7CH8
Boscam_A58655845582558055785576557455725
Boscam_B57335752577157905809582858475866
Boscam_E57055685566556455885590559255945
FATSHARK57405760578058005820584058605880
Race Band56585695573257695806584358805917
Boscam_D53625399543654735510554755845621
Low Race53625399543654735510554755845621
Boscam_X49905020505550805110514051705200

8. Maintenance

  • Cleaning: Keep the VTX clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or solvents.
  • Inspection: Regularly inspect the antenna connector, cables, and solder joints for any signs of wear or damage.
  • Storage: Store the VTX in a dry, cool environment away from direct sunlight and extreme temperatures.

9. Troubleshooting

  • No Video Signal:
    • Ensure the antenna is securely connected.
    • Verify that the VTX is powered on and receiving adequate voltage.
    • Check that your FPV receiver is on the correct channel and band.
    • Inspect video wiring for correct connections and continuity.
  • Poor Video Quality/Range:
    • Ensure the VTX power level is set appropriately for your flying environment.
    • Check for interference from other electronic components on your drone.
    • Verify antenna type and orientation. A generic omnidirectional antenna can provide good performance.
    • Ensure there are no obstructions between your drone and receiver.
  • VTX Overheating:
    • Ensure sufficient airflow around the VTX, especially when operating at higher power levels or when the drone is idle.
    • Consider adding a small cooling fan if operating in enclosed spaces.
    • Confirm the input voltage is within the specified range.

10. User Tips

  • Antenna Choice: While the basic package does not include an antenna, using a generic omnidirectional antenna can provide good performance.
  • Betaflight Configuration: For beginners, configuring Betaflight for VTX control might be complex. Refer to online resources and community guides for assistance.
  • Heat Management: The VTX can heat up quickly, especially at higher power levels (e.g., 2.5W) when the drone is not flying. Always ensure adequate cooling to prevent damage.
  • Long Range: The high power output of these VTX units is effective for achieving long-range flights.

11. Frequently Asked Questions (FAQ)

Q: Does the DAKEFPV VTX come with an antenna?
A: No, the basic package typically includes an adapter cable (MMCX to SMA/RP-SMA) but not the antenna itself. You will need to purchase an antenna separately.
Q: Where can I find the VTX table for the 1.6W version?
A: The frequency table provided in this manual is universal and applies to both the 1.6W and 2.5W versions of the DAKEFPV VTX.

12. Warranty and Support

For any technical issues or support inquiries not covered in this manual, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.