1. Introduction
The HIROYASU Q7 Palm Microphone Speaker is a versatile accessory designed to enhance communication for compatible walkie-talkies. Featuring a durable build, clear audio output, and a convenient design, it is suitable for various environments. This manual provides essential information for setting up, operating, and maintaining your device.
2. Specifications
| Category | Feature | Specification |
|---|---|---|
| General | Case Material | High Strength ABS Plastic |
| Cable Material | High Quality TPU | |
| Cable Length (Stretched) | 1.2 meters (Below 1.5m) | |
| Cable Length (Non-stretched) | 0.6 meters | |
| Net Weight | 150g | |
| Speaker | Size | 36mm |
| SPL | 94dB ± 3dB | |
| Impedance | 8 Ω ± 15% | |
| Audio Output | 2W | |
| Microphone | Type | Electret Microphone |
| Size | 9.7 * 6.7mm | |
| Frequency | 20-16000Hz | |
| Sensitivity | -38dB ± 2dB | |
| Other Features | Key Type | Single PTT |
| Waterproof Rating | IP55 | |
| Connector Type | K Plug | |
| Connectivity | Wired | |
| Certification | CE, FCC |
Note: The power rating for compatible walkie-talkies is 0.5W (inclusive) - 3W (not inclusive).
3. Setup Instructions
- Unpack the Device: Carefully remove the HIROYASU Q7 Palm Microphone Speaker from its packaging.
- Identify the Connector: The microphone speaker features a K-plug connector, which consists of two pins (2.5mm and 3.5mm).
- Locate Walkie-Talkie Port: Identify the corresponding audio/microphone port on your compatible walkie-talkie. This is typically located on the side of the device, often protected by a rubber cover.
- Connect the Plug: Insert the K-plug firmly into the walkie-talkie's port. Ensure both pins are fully seated to establish a secure connection.
- Secure the Clip: Use the 360° rotating back clip to attach the microphone speaker to your clothing, such as a collar or pocket, for convenient access.
For a visual guide on connecting the device, please refer to the product demonstration video below:
Video: Product unboxing and demonstration of connecting the HIROYASU Q7 to a walkie-talkie.

Image: Speaker/Mic Plug Wiring Diagram, showing the 2.5mm and 3.5mm pins and internal connections for speaker, mic, and PTT.
4. Operating Instructions
- Power On Walkie-Talkie: Ensure your walkie-talkie is powered on and set to the desired channel.
- Adjust Volume: Use the volume controls on your walkie-talkie to adjust the speaker output level of the palm microphone speaker.
- Transmit (Push-to-Talk - PTT): To transmit your voice, press and hold the large Push-to-Talk (PTT) button located on the side of the microphone speaker. Speak clearly into the microphone. Release the PTT button to stop transmitting and return to receive mode.
- Receive Audio: When not transmitting, the speaker will output incoming audio from your walkie-talkie.
- Using the Clip: The 360° rotating back clip allows you to position the microphone speaker conveniently for hands-free operation while clipped to your attire.

Image: Close-up of the HIROYASU Q7 showing the large, slip-resistant Push-to-Talk (PTT) button and the brand logo.

Image: Diagram illustrating the 360-degree rotating back clip for flexible attachment.

Image: A user holding the HIROYASU Q7 palm microphone speaker, demonstrating its ergonomic design and ease of use.
5. Maintenance
- Cleaning: Wipe the exterior of the microphone speaker with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Care: The high-quality TPU cable is designed for durability. Avoid excessive pulling, twisting, or sharp bends to prevent damage.
- Water Resistance: The device has an IP55 waterproof rating, meaning it is protected against dust and low-pressure water jets from any direction. While durable, avoid submerging it in water.

Image: Close-up of the coiled, high-quality TPU cable, highlighting its robust construction.

Image: View of the HIROYASU Q7, emphasizing its high-strength ABS case material for durability.

Image: The HIROYASU Q7 shown in a wet environment, illustrating its IP55 waterproof capabilities.
6. Troubleshooting
- No Audio Output:
- Ensure the K-plug is fully and securely inserted into the walkie-talkie's port.
- Check the volume level on your walkie-talkie.
- Verify that the walkie-talkie is powered on and functioning correctly.
- Cannot Transmit:
- Make sure the PTT button is fully pressed and held down while speaking.
- Confirm that your walkie-talkie is in transmit mode (if applicable) and not experiencing any internal issues.
- Poor Audio Quality:
- Speak clearly and directly into the microphone.
- Check for any obstructions around the microphone or speaker.
- Ensure the cable is not damaged or kinked.
7. Compatibility
The HIROYASU Q7 Palm Microphone Speaker is compatible with the following walkie-talkie models:
- Quansheng: UV-K5, UVK5(8)
- Baofeng: UV-5RMINI, UV-5R, BF-888S, UV-17PRO, UV-5RH, UV-25M, DM-32, UV-32

Image: The HIROYASU Q7 Palm Microphone Speaker displayed in five optional colors: Silver, Golden, Black, Green, and Orange.

Image: Multiple HIROYASU Q7 units lined up, highlighting their unique appearance design and available color options.
8. User Tips
No specific user tips were available from provided reviews or Q&A content for this product.
9. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.