1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Vehicle Intelligent System. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Figure 1: MEKEDE Vehicle Intelligent System Main Display
2. Package Contents
Before installation, please verify that all items listed below are present in your package:
- Main Head Unit (Machine)
- Power Cable
- RCA Cable
- USB Cable
- Reversing Camera Cable
- GPS Antenna
- Installation Frame and Cables (specific to Toyota Avensis T25)

Figure 2: Included Package Contents
3. Setup and Installation
3.1 Vehicle Compatibility
This intelligent system is designed for Toyota Avensis T25 models manufactured between 2002 and 2008.

Figure 3: Before and After Installation in Toyota Avensis (2004-2008)
3.2 Wiring Diagram
Refer to the following diagram for proper connection of the head unit to your vehicle's electrical system and accessories. Ensure all connections are secure before powering on the device.

Figure 4: Back of the Host Device Wiring Diagram
- Power Connections: A3 (ACC Key Switch), A2 (B+), A1 (GND), Battery +12V, Battery GND.
- Speaker Connections: A15 (Front Left FL+), A13 (Front Left FL-), A11 (Front Right FR+), A9 (Front Right FR-), A16 (Rear Right RR+), A14 (Rear Right RR-), A12 (Rear Left RL+), A10 (Rear Left RL-). Also separate FR-, FR+, RR-, RR+, FL-, FL+, RL-, RL+ connections.
- Control Connections: A7 (Steering wheel control key), A6 (Steering wheel control study-2), A5 (Reverse detecting line), A4 (ILL small lights detecting), KEY1, KEY2, BRAKE CTL, AUTO ANT.
- Input/Output: Camera input, USB1, USB2, Audio and video multifunctional plug.
- CAN-Bus: If your car requires CAN-Bus, ensure the appropriate cable is connected to the designated port.
4. Operating Instructions
4.1 Initial Power-On and System Overview
Upon first power-on, the system will display a welcome screen and then load the Android operating system. The main menu provides access to various functions such as Navigation, Music, Video, Radio, and Settings.
Video 1: Product Demonstration and Interface Overview
4.2 Carplay and Android Auto
The system supports both wireless and USB Carplay and Android Auto functionalities.
- Wireless Carplay/Android Auto:
- Connect your phone via Bluetooth (BT).
- For Carplay, click on "R Lin-k" and wait for connection.
- For Android Auto, click on "Android Auto App" and wait for connection.
- USB Carplay/Android Auto: Both Carplay and Android Auto can also be connected via a USB cable.

Figure 5: Wireless Carplay and Android Auto Connection Steps
4.3 GPS Navigation
The built-in GPS navigation system provides omni-directional map display, synchronous display of real-time traffic conditions, and rapid, accurate positioning. Compatible with various navigation applications such as iGO, Navitel, Sygic, Yandex, Google, Waze, and AMAP.

Figure 6: GPS Navigation Interface
4.4 FM Radio
The system supports automatic and manual search for FM radio stations. You can drag the icon of a target station to replace it in the channel list for quick access.

Figure 7: FM Radio Interface
4.5 Bluetooth Function
The built-in smart Bluetooth system allows for mobile phone pairing, hands-free calling, Bluetooth music streaming, and synchronization of contacts and call records, enhancing driving safety.

Figure 8: Bluetooth Functionality
4.6 Steering Wheel Control (SWC)
Take control of music playback or use hands-free calling functions directly from your steering wheel. The head unit supports digital SWC for convenient and safe operation.

Figure 9: Steering Wheel Control Integration
4.7 Reversing Video (Optional)
If an optional rear-view camera is connected, the system will automatically display the rear view when reversing. The picture quality is designed to be clear and assist with safe maneuvering.

Figure 10: Reversing Video Display
4.8 ADAS DVR (Optional)
With an optional ADAS (Advanced Driver-Assistance Systems) DVR, the system provides anti-collision warnings, including front vehicle distance prediction, forward collision warning, and lane departure warning, to enhance driving safety.

Figure 11: ADAS DVR Warnings
4.9 System Settings
Navigate through the settings menu to customize various aspects of your system, including:
- WLAN: Configure Wi-Fi connections.
- NAVI: Set default navigation app and background volume.
- Display: Adjust brightness (day/night), language, and key light settings.
- Wallpaper: Choose from default wallpapers or add your own.
- Reverse Camera: Configure camera format, guidelines, radar, and mirror settings.
- Radio: Set radio signal strength and FM area selection.
- Datetime: Adjust date, time, time zone, and 24-hour format.
- Keys: Learn steering wheel and panel button functions.
- System: Access factory settings, system updates, and reboot options.
- About: View product information, software version, and other details.
5. Maintenance
To ensure the longevity and optimal performance of your MEKEDE Vehicle Intelligent System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: Regularly check for and install firmware and software updates provided by MEKEDE to benefit from new features and performance improvements.
- Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Power Management: Ensure your vehicle's electrical system is stable. Avoid frequent power interruptions.
6. Troubleshooting
If you encounter issues with your device, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Incorrect power wiring, blown fuse, vehicle battery issue | Check power cable connections (B+, ACC, GND). Verify vehicle fuse. Check car battery voltage. |
| No sound output | Incorrect speaker wiring, volume too low, mute activated | Check speaker connections. Increase volume. Ensure device is not muted. Check amplifier status in settings. |
| GPS not working | GPS antenna not connected/positioned correctly, no GPS signal | Ensure GPS antenna is securely connected and placed in an open area (e.g., dashboard). Check GPS settings. |
| Steering wheel controls not responding | Incorrect wiring, controls not learned | Verify KEY1/KEY2 wiring. Perform steering wheel button learning in system settings. If applicable, check CAN-Bus connection. |
| Bluetooth connection issues | Bluetooth off, pairing mode not active, phone compatibility | Ensure Bluetooth is enabled on both devices. Put the head unit in pairing mode. Try restarting both devices. |
| Rear view camera not displaying | Camera not connected, reverse trigger wire issue, camera settings | Check camera input and reversing camera cable connections. Verify reverse detecting line (A5) is correctly wired. Check camera settings in the system. |
If the problem persists, please contact MEKEDE customer support for further assistance.
7. Specifications
The MEKEDE Vehicle Intelligent System is available in different configurations. The following table outlines the key parameters for the X1 and X2 models:
| Parameter | X1 Model | X2 Model |
|---|---|---|
| RAM/ROM | 1GB+16GB | 2GB+32GB |
| OS | Android 14 | Android 14 |
| Core | 4-Core | 4-Core |
| Car-play + Auto | ✔ | ✔ |
| Resolution | 1024*600 | 1024*600 |
| Screen | IPS | IPS |
| Internet | WIFI | WIFI |
| Camera/DVR | Optional | Optional |
| BT module | ✔ | ✔ |
| Radio | FM | FM |
General Specifications:
- Tuner Type: FM/AM
- Built-in DVD Player: No
- Built-in CD player: No
- Touch Screen: Yes
- Built-in Screen: Yes
- Category: Car Multimedia Player
- TF/Micro SD Slot: 0
- Din: Double Din
- Interface: Plug and play
- Operating System: Android
- Out Power: 4*45W
- Voltage: 12 V
- Item Weight: 1.5 kg
- Item Size: 9 inch
- Output Type: Colored
- Max External Memory: 32G
- Special Features: Wi-Fi function, Support steering wheel control, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, DSP, CarPlay, Android Auto, Reversing Input
- Digital Media Format: Mp3, MP4, WMA, JPEG
- OSD Language: Chinese (Simplified), Chinese (Traditional), Arabic, German, Russian, French, Korean, Czech, Portuguese, Japanese, Slovak, Slovenian, Thai, Turkish, Hebrew, Greek, Spanish, Italian, English
- Certification: CE
- Accessory Type: Frame and cable
- For Vehicle Brands/Model: TOYOTA Avensis T25 (2002-2008)

Figure 12: Car Multimedia Player Parameter Comparison
8. User Tips
- Wiring Verification: Double-check all wiring connections, especially for power and speakers, to prevent damage and ensure proper function.
- Steering Wheel Control Setup: After installation, perform the steering wheel button learning process in the system settings to enable full control from your steering wheel.
- CAN-Bus Compatibility: If your vehicle uses a CAN-Bus system, ensure the correct CAN-Bus decoder cable is connected to maintain vehicle-specific functions.
- Firmware Updates: Keep your system updated with the latest firmware. MEKEDE provides free updates for firmware, software, UI, and GPS navigation maps.
- GPS Antenna Placement: For optimal GPS signal reception, place the GPS antenna in an unobstructed location, such as on the dashboard or under the windshield.
9. Warranty and Support
Your MEKEDE Vehicle Intelligent System comes with a standard 1-year warranty period. To extend your warranty to 2 years, provide 5-star praise and share installation photos after receiving your product. Please contact MEKEDE customer support for any warranty claims or technical assistance.
MEKEDE is committed to providing continuous support, including free updates for firmware, software, UI, and GPS navigation maps to enhance your user experience.