Dongcheng FFCL18-08

Contents

Dongcheng FFCL18-08 Dual Port Battery Charger

Instruction Manual

1. Introduction

Thank you for choosing the Dongcheng FFCL18-08 Dual Port Battery Charger. This charger is designed to efficiently charge 14.4V-18V lithium-ion batteries for various power tools, including wrenches and drills. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Safety Instructions

Always observe the following safety precautions to prevent electric shock, fire, or serious injury:

  • Use the charger only with compatible 14.4V-18V lithium-ion batteries.
  • Do not expose the charger to rain or wet conditions.
  • Do not use the charger if the cord or plug is damaged.
  • Ensure proper ventilation during charging; do not cover the charger.
  • Keep the charger away from heat sources and flammable materials.
  • Unplug the charger from the power outlet when not in use or before cleaning.
  • Do not attempt to disassemble or modify the charger.

3. Product Overview

The FFCL18-08 charger features two charging ports, allowing for simultaneous charging of two batteries. It includes indicator lights for monitoring charging status.

Front view of Dongcheng FFCL18-08 Dual Port Battery Charger showing charging ports, power cord, and indicator labels.

Figure 1: Front view of the FFCL18-08 Charger with specifications and indicators.

Back view of Dongcheng FFCL18-08 Dual Port Battery Charger showing ventilation slots.

Figure 2: Back view of the FFCL18-08 Charger.

4. Setup

  1. **Unpack:** Carefully remove the charger from its packaging.
  2. **Placement:** Place the charger on a stable, flat, and dry surface in a well-ventilated area.
  3. **Power Connection:** Plug the charger's power cord into a standard 220-240V~ 50-60Hz electrical outlet.

5. Operating Instructions

  1. **Insert Battery:** Align the battery with one of the charging ports on the charger and slide it in until it clicks into place. You can insert a second battery into the other port if needed.
  2. **Monitor Charging:** Observe the indicator light next to each charging port:
    • **Red Light:** Indicates the battery is currently charging.
    • **Green Light:** Indicates the battery is fully charged.
    • **Yellow Light (or flashing red/green):** May indicate a fault, such as an overheated battery, a damaged battery, or an incorrect battery type. Remove the battery and check for issues.
  3. **Remove Battery:** Once the indicator light turns green, the battery is fully charged. Press the release button (if present) or simply slide the battery out of the charging port.

Video 1: Demonstration of battery insertion and charging process.

6. Maintenance

  • **Cleaning:** Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
  • **Storage:** Store the charger in a dry, cool place, away from direct sunlight and moisture.
  • **Inspection:** Regularly inspect the power cord and charger housing for any signs of damage.

7. Troubleshooting

Problem Possible Cause Solution
Battery not charging (no indicator light) No power to charger; battery not properly inserted; faulty battery. Check power outlet and connections. Re-insert battery firmly. Try a different battery.
Yellow/Flashing Light Battery too hot/cold; battery fault; incompatible battery. Allow battery to reach room temperature. Remove and re-insert battery. Ensure battery is compatible. If problem persists, battery may be faulty.
Slow charging Environmental temperature too high/low; old battery. Ensure charger is in a suitable environment. Battery capacity may degrade over time.

8. Specifications

Feature Detail
Model FFCL18-08
Input Voltage 220-240V~
Input Frequency 50-60Hz
Input Power 100W
Output Voltage (Port 1) 14.4-18V
Output Current (Port 1) 2.0A
Output Voltage (Port 2) 14.4-18V
Output Current (Port 2) 2.0A
DIY Supplies Category Electrical
Origin Mainland China

9. User Tips

  • For optimal battery life, avoid fully discharging batteries before recharging.
  • Always ensure the charger is placed on a non-flammable surface during operation.
  • If charging multiple batteries, consider rotating them between the two ports for even wear, though simultaneous charging is supported.

10. Warranty & Support

For any questions regarding the operation, maintenance, or troubleshooting of your Dongcheng FFCL18-08 charger, please refer to the seller's support channels. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.