1. Introduction
This manual provides detailed instructions for assembling, operating, and maintaining your wishiot Triple Axle Car Chassis MOC building block set. Please read this manual carefully before beginning assembly to ensure correct construction and safe use.
2. Safety Information
- Choking Hazard: This set contains small parts and is not suitable for children under 6 years old. Recommended age is 14+ years.
- Keep all parts away from infants and young children to prevent accidental ingestion.
- Dispose of packaging materials responsibly.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Your package should contain the following items:
- 119 pieces of building blocks for the Triple Axle Car Chassis.
- Assembly instructions (this manual).
If any parts are missing or damaged, please contact customer support.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | wishiot |
| Model Name | Triple Axle Car Chassis MOC |
| Material | Plastic (ABS) |
| Block Size | Small building block (Compatible with Lego) |
| Plastic Block Shape | Self-Locking Bricks |
| Number of Pieces | 119 |
| Recommended Age | 14+ years |
| Is Electric | No Battery |
| Origin | Mainland China |
| Approx. Package Dimensions | Length: 20 cm, Width: 15 cm, Height: 10 cm |
| Approx. Package Weight | 0.22 kg |
5. Setup and Assembly
Follow these steps to assemble your Triple Axle Car Chassis MOC building block set:
- Unpack Components: Carefully open the package and lay out all 119 building block pieces on a clean, flat surface. Verify that all parts are present according to the included parts list (if any, otherwise refer to the total piece count).
- Identify Main Chassis Sections: The model consists of three main axle sections. Identify the components for each section, including the grey block structures, black connecting pieces, and wheels.
- Assemble Individual Axle Units:
Figure 1: Close-up of an assembled axle unit, showing the suspension mechanism. - For each axle unit, connect the grey block frames.
- Attach the suspension components (springs and shock absorbers) as shown in Figure 1.
- Secure the wheels to the axle ends. Ensure they rotate freely.
- Connect Axle Units:
Figure 2: Top-down view illustrating the connection points between two axle units. - Use the black connecting beams to link the three assembled axle units together. Refer to Figure 2 for proper alignment and connection points.
- Ensure the connections are firm and stable, allowing for articulation between the units.
- Final Assembly Check:
Figure 3: The complete triple axle chassis assembly. - Once all three axle units are connected, gently test the chassis for stability and proper wheel rotation.
- The final assembled chassis should resemble Figure 3.
6. Operating Your Model
This building block set creates a static or push-along model. It is not motorized and does not require batteries.
- Display: The assembled chassis can be used as a display model.
- Play: Gently push the model on smooth surfaces. Avoid rough handling or dropping to prevent parts from detaching.
- Integration: As a MOC (My Own Creation) component, this chassis can be integrated into larger building block projects or custom vehicle designs.
7. Care and Maintenance
- Cleaning: To clean the blocks, wipe them gently with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the assembled model or individual blocks in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.
- Disassembly: If disassembling the model, do so carefully to avoid stressing or breaking the plastic connectors.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Parts do not fit together | Incorrect orientation or incompatible pieces. | Refer to the assembly images and ensure correct piece selection and orientation. Apply gentle, even pressure. |
| Model is unstable or wobbly | Loose connections or missing pieces. | Double-check all connections to ensure they are firmly pressed together. Verify all required pieces are used. |
| Wheels do not spin freely | Axle or wheel components are too tight or misaligned. | Ensure axles are inserted correctly and not overly constrained. Re-seat wheels if necessary. |
| Missing pieces | Manufacturing error or lost during unpacking. | Carefully check packaging and assembly area. If still missing, contact customer support with details of the missing part. |
9. User Tips
- Organize Parts: Before starting assembly, sort the blocks by type or color to make the process smoother.
- Gentle Pressure: When connecting blocks, use firm but gentle pressure to avoid damaging the pieces.
- Creative Building: This MOC set is designed for customization. Feel free to experiment with other compatible building blocks to create unique designs.
10. Warranty and Support
For any questions, missing parts, or support inquiries regarding your wishiot Triple Axle Car Chassis MOC building block set, please contact the seller directly through the platform where you made your purchase.
Please retain your proof of purchase for any warranty claims or support requests.
11. Statement of Compliance
Disclaimer:
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.