Hobbywing X8 G2 8120-100KV

Contents

Hobbywing X8 G2 Integrated Drone Motor 8120-100KV Propulsion System User Manual

Model: X8 G2 8120-100KV | Brand: Hobbywing

1. Introduction

The Hobbywing X8 G2 Integrated Drone Motor is a new-generation propulsion system designed for high-performance agricultural drones. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your X8 G2 system. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Safety Information

  • Always read and understand the entire manual before operation.
  • Ensure all connections are secure and correct before powering on the system.
  • Keep hands and loose clothing away from rotating propellers.
  • Operate the drone in open areas, away from people, animals, and obstacles.
  • Use only genuine Hobbywing parts and accessories.
  • Do not modify the motor or propeller system. Unauthorized modifications can lead to malfunction and void the warranty.
  • Disconnect power immediately if any abnormal behavior is observed during operation.
  • The motor can reach high temperatures during operation; allow it to cool before handling or performing maintenance.

3. Product Overview

The Hobbywing X8 G2 is an integrated propulsion system featuring an 8120-100KV motor and a 3011S propeller. It is engineered for reliability and performance in demanding environments, particularly for agricultural applications.

Key Features:

  • Integrated Design: Combines motor, ESC, and propeller for streamlined installation and optimal performance.
  • Ultra-Strong Protection: Coated with high-temperature resistant enamel wire (up to 200°C) and IPX6 ingress protection, making it suitable for harsh conditions like rain, pesticide mist, high temperatures, and dust.
  • Multiple Protection Mechanisms: Features software and hardware protections against over-current, motor stall, throttle loss, temperature anomalies, and over/under-voltage. These functions are configurable based on application needs.
  • Reliable Structural Design: Incorporates an aluminum alloy tube clamp, reinforced internal beam, and a triple interlocking structure to reduce weight while enhancing protection for motor components and minimizing vibrations during high-speed flights.
  • Independent Black Box: Equipped with a new log feature that supports up to 20 hours of operation data storage for fast fault diagnosis and troubleshooting.
  • Real-time Data Interaction & Dual Throttle Redundancy Control: Integrates CAN bus and PWM analog signals for real-time response and anti-interference capabilities. The CAN interface allows real-time data exchange with flight controllers for monitoring critical parameters (speed, throttle, current, voltage, temperature), enhancing flight safety.
  • Multiple Parameter Adjustment Modes: Drive parameters, motor rotation direction, LED color, and other settings can be adjusted via a remote controller or the DataLink software. A dedicated OTA (Over-The-Air) function facilitates efficient multi-ESC firmware upgrades in one drone.
  • Compatibility: Supports DroneCAN and HWCAN (default) protocols, enabling interoperability with mainstream flight controller systems such as ArduPilot, VK, Byaero, and Jiyi.

4. Setup

4.1 Unpacking

Carefully remove all components from the packaging. Verify all parts are present and undamaged before proceeding with installation.

4.2 Propeller Installation

  1. Ensure the correct propeller (CW or CCW) is matched to the motor's intended rotation direction.
  2. Securely attach the 3011S propeller to the motor hub using the provided hardware. Ensure all screws are tightened to the manufacturer's specifications to prevent loosening during flight.
Hobbywing 3011S Propeller

Figure 1: 3011S Propeller for X8 G2 System.

4.3 Motor Mounting

  1. Mount the X8 G2 motor securely to the drone's frame using appropriate screws and the aluminum alloy tube clamp. Refer to the CAD diagram for precise mounting dimensions and hole patterns.
Hobbywing X8-G2 Propulsion System CAD Diagram with dimensions and wiring

Figure 2: X8-G2 Propulsion System CAD Diagram showing dimensions (e.g., motor diameter 90.2mm, height 49mm, mounting hole diameter 35mm) and wiring connections. Note the 5-Pin Cable (JR-3P Male Connector) and Power Cables (14AWG, Red: Positive, Black: Negative).

4.4 Wiring Connections

  1. Connect the power cables (Red: Positive, Black: Negative, 14AWG) from the motor to your drone's power distribution board or battery.
  2. Connect the 5-Pin cable (JR-3P Male Connector) to the flight controller for signal and data communication. Refer to your flight controller's manual for specific port connections.
CAN Dual-throttle PWM Redundancy Diagram

Figure 3: Diagram illustrating CAN (Digital Signal) and PWM (Analog Signal) dual-throttle redundancy for enhanced flight safety and anti-interference capabilities.

4.5 Initial Configuration

  1. Power on the drone.
  2. Use the DataLink host computer software or a compatible remote controller to adjust initial parameters such as motor rotation direction, LED color, and other drive parameters.
  3. Perform a motor calibration if required by your flight controller system.

5. Operating Instructions

5.1 Pre-Flight Check

  • Inspect propellers for any damage or looseness.
  • Verify all wiring connections are secure.
  • Check battery levels.
  • Ensure the drone is placed on a stable, level surface.

5.2 Flight Operation Settings

  • Utilize the DataLink software or your remote controller to fine-tune flight parameters for optimal performance based on your application needs.
  • The system supports OTA (Over-The-Air) firmware upgrades for multi-ESC systems via DataLink.
DataLink Software Interface for Parameter Adjustment

Figure 4: DataLink software interface on a mobile device and remote controller, demonstrating multiple parameter adjustment modes for flight optimization.

5.3 Monitoring

  • The CAN interface allows real-time monitoring of critical flight parameters (speed, throttle, current, voltage, temperature) through your flight controller system.
  • The integrated black box records up to 20 hours of operation data for post-flight analysis.
Real-time Data Interaction and Dual Throttle Redundancy Control

Figure 5: Visual representation of real-time data interaction and dual throttle redundancy control, crucial for flight safety and performance monitoring.

6. Maintenance

  • Regular Inspection: Periodically check the motor and propeller for any signs of wear, damage, or debris accumulation.
  • Cleaning: After use, especially in harsh environments (e.g., pesticide mist, dust), the motor can be rinsed with water due to its IPX6 rating. Ensure it is thoroughly dried before next use.
  • Propeller Replacement: Replace propellers if they are chipped, bent, or show any signs of damage to maintain flight stability and efficiency.
  • Firmware Updates: Regularly check for and apply firmware updates for the ESC and motor via the DataLink software to ensure optimal performance and access to new features.

7. Troubleshooting

  • Motor Not Spinning:
    • Check power connections to the motor.
    • Verify signal cable connection to the flight controller.
    • Ensure the battery is charged.
    • Check for any physical obstructions preventing motor rotation.
  • Abnormal Vibrations/Noise:
    • Inspect propellers for damage or imbalance. Replace if necessary.
    • Check motor mounting screws for tightness.
    • Examine motor bearings for wear.
  • Overheating:
    • Ensure proper ventilation around the motor.
    • Check for excessive load or incorrect propeller size.
    • Monitor temperature via DataLink software.
  • Flight Instability:
    • Verify propeller installation and rotation direction.
    • Check flight controller settings and calibration.
    • Review black box data for anomalies.

8. Specifications

AttributeValue
Brand NameHobbywing
ModelX8 G2 8120-100KV
Max Thrust17.5 kg
Propeller Type3011S Folding Propeller
For Vehicle TypeAirplanes (Drones)
RC Parts & AccsMotor Components
MaterialComposite Material
OriginMainland China
Recommend Age14+y
Is ElectricNo Battery
Is Batteries IncludedNo
High-concerned chemicalNone
Ingress ProtectionIPX6
Max Temperature Resistance200°C (enamel wire)
Data StorageUp to 20 hours (Black Box)
Communication ProtocolsDroneCAN, HWCAN
Motor Diameter90.2 mm (approx.)
Motor Height49 mm (approx.)
Mounting Hole Diameter35 mm (approx.)
Power Cable Gauge14AWG
Signal Cable ConnectorJR-3P Male Connector (5-Pin Cable)

9. User Tips

No specific user tips were available from provided reviews or Q&A. However, general tips for drone enthusiasts include:

  • Always perform a thorough pre-flight check of all components, especially propellers and wiring, before each flight.
  • Regularly update firmware for optimal performance, security, and to access new features.
  • Familiarize yourself with the DataLink software for advanced parameter adjustments and diagnostics.
  • Pay attention to motor temperatures during extended operations, especially in hot climates, to prevent overheating.

10. Warranty and Support

This Hobbywing X8 G2 Integrated Drone Motor is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service inquiries, please contact Hobbywing customer service or your authorized dealer. Please retain your purchase receipt as proof of purchase for any warranty-related matters.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.