1. Introduction
Thank you for purchasing the SMAEL Sport Watch Model 8128. This watch is designed for active individuals, featuring a durable construction, multiple functions, and water resistance. Please read this manual carefully to understand the operation and care of your new watch.
2. Key Features
- Digital LED Display
- Shock Resistant
- 50M Water Resistance (5ATM)
- Alarm Clock Function
- Stopwatch (Chronograph)
- Luminous Display (LED Night Light)
- Auto Date and Complete Calendar
- Week Display
- Dual Time Display
- Countdown Timer
- Shatterproof Hardlex (Plexiglass) Dial Window
- Durable Plastic Case and Silicone Band
3. Watch Components and Button Functions
Familiarize yourself with the watch's buttons and display areas:

- LIGHT Button (Top Left): Activates the LED night light.
- MODE Button (Bottom Left): Cycles through different modes (Time, Stopwatch, Alarm, Dual Time, Countdown).
- START Button (Top Right): Used to start/stop functions in Stopwatch mode, adjust values in setting mode.
- RESET Button (Bottom Right): Used to reset functions in Stopwatch mode, adjust values in setting mode.
4. Setup and Time Setting
To set the time and date on your SMAEL 8128 watch:
- Enter Time Setting Mode: In normal time display mode, press and hold the MODE button for approximately 3 seconds until the seconds start flashing. This indicates you are in setting mode.
- Select Item to Adjust: Press the MODE button repeatedly to cycle through the settings in the following order: Seconds → Hour → Minute → Year → Month → Day. The currently selected item will flash.
- Adjust Values: Use the START button to increase the value or the RESET button to decrease the value of the flashing item.
- For seconds, pressing START will reset them to 00.
- For hour, you can switch between 12-hour and 24-hour format. A "PM" indicator will show for 12-hour format afternoon times.
- Exit Setting Mode: Once all settings are adjusted, press the MODE button again to return to normal time display, or wait for a few seconds for the watch to automatically exit setting mode.
5. Operating Instructions
5.1 Mode Switching
Press the MODE button to cycle through the following modes:
- Normal Time Display
- Stopwatch Mode
- Alarm Mode
- Dual Time Mode
- Countdown Timer Mode
5.2 Stopwatch Function
- From normal time display, press MODE until you reach the Stopwatch mode (usually indicated by "ST" or "00:00:00").
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to reset the stopwatch to zero.
- To record lap times, press RESET while the stopwatch is running to display the lap time, then press START to continue total timing.
5.3 Alarm Setting
- From normal time display, press MODE until you reach the Alarm mode (usually indicated by "AL" and a time).
- Press and hold the START button until the alarm hour flashes.
- Use the MODE button to switch between setting the hour and minute.
- Use the RESET button to adjust the flashing hour or minute.
- Press the START button to confirm and exit alarm setting.
- To turn the alarm ON/OFF, in Alarm mode, press the RESET button. An alarm icon will appear/disappear on the display.
5.4 LED Night Light
Press the LIGHT button (top left) to illuminate the display. The light will stay on for a few seconds. This feature uses a cold light digital display that is soft and not blinding, allowing for accurate time reading in low-light conditions.

6. Maintenance and Care
6.1 Water Resistance (5ATM / 50M)
Your SMAEL 8128 watch is water-resistant up to 50 meters (5ATM). This means it is suitable for daily use, hand washing, face washing, and rain exposure. It is generally suitable for short periods of recreational swimming. However, it is NOT recommended for diving, snorkeling, or high-pressure water activities. Do NOT operate buttons underwater.

6.2 Cleaning
Wipe the watch case and band with a soft, damp cloth. For silicone bands, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch.
6.3 Battery Replacement
The watch uses a standard watch battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure proper sealing and maintain water resistance.
6.4 Shock Resistance
The watch features a shock-resistant design with an alloy case and shock absorption. While durable, avoid excessive impacts or dropping the watch from significant heights to prevent damage.

7. Troubleshooting
- Display is blank or dim: The battery may be low. Replace the battery.
- Time is incorrect: Re-adjust the time following the "Setup and Time Setting" instructions.
- Alarm does not sound: Ensure the alarm is turned ON (check for the alarm icon on the display) and the alarm time is set correctly.
- Water inside the watch: Immediately take the watch to a professional for inspection and repair to prevent further damage. Avoid operating buttons underwater.
8. Specifications

| Feature | Specification |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8128 |
| Movement | Digital (Electronics) |
| Display Type | Digital |
| Case Material | Plastic |
| Case Shape | Rectangle |
| Dial Diameter | 44mm |
| Case Thickness | 15mm |
| Dial Window Material Type | Hardlex (Plexiglass) |
| Band Material Type | Silicone (Silica Gel) |
| Band Width | 21mm |
| Band Length | 22cm (130mm/80mm segments) |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50 Meters) |
| Net Weight | 47g |
| Battery Included | Yes |
| Voltage | <36V |

9. User Tips
Based on general user feedback for similar sport watches:
- Read the Manual: Always refer to this manual for specific instructions, especially for initial setup and advanced functions.
- Button Feel: The buttons are designed to be robust. A firm press may be required for activation.
- Water Resistance: While rated for 50M, avoid hot water or steam, as temperature changes can affect the seals. Do not press buttons while the watch is wet or submerged.
- Display Visibility: The LED night light is effective in dark conditions. In bright sunlight, ensure the watch is angled correctly for optimal digital display visibility.
10. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.