Kunray KR5V V2

Contents

Kunray KR5V V2 72V 5000W Electric Brushless Hub Motor User Manual

Model: KR5V V2

1. Introduction

The Kunray KR5V V2 is an upgraded 72V 5000W electric brushless hub motor designed for high-performance applications such as electric motorcycles and go-karts. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your motor.

2. Safety Information

  • Always wear appropriate safety gear, including gloves and eye protection, during installation and maintenance.
  • Ensure the power source is disconnected before performing any installation, wiring, or maintenance tasks.
  • This motor operates at high voltage (72V) and high power (5000W). Improper handling can lead to severe injury or death. If you are not confident in your electrical skills, seek professional assistance.
  • The motor can become very hot during operation. Do not touch the motor with your bare body during or immediately after use to prevent burns.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Keep children and pets away from the motor and vehicle during operation and maintenance.

3. Package Contents

Please check the package for the following items:

  • Kunray KR5V V2 72V 5000W Brushless Hub Motor
  • Sprocket (selected option: #35-9T, #35-11T, or 420-10T)
  • Mounting Nut
  • Wiring Harness (pre-attached to motor)

Note: Additional components such as controller, battery, and throttle are typically sold separately and are required for a complete system.

4. Specifications

ParameterValue
Brand NameKUNRAY
Rated Voltage72VDC
Rated Wattage5000W
Rated RPM5000rpm
Peak RPM8000rpm
Rated Current60A
Peak Current80-100A
Torque N.m8.5N.m
Peak Torque35N.m
Poles5 pair / 10pcs
Sensor TypeHall sensor
TMP SensorKTY84-130
Insulation ClassF (155℃)
IP RatingIP54
CoolingAir cooling
Phase Wire Size8mm
Weight5.5 KG
Sprocket Options#35 9T, #35 11T, 420-10T
DesignBrushless
Motor TypeBrushless Gear Hub Motor
CertificationCE, GMP
Wattage Category> 400W
High-concerned chemicalNone
OriginMainland China

Motor Dimensions and Upgrades

The KR5V V2 features an updated shaft and reinforced covers for increased durability and stability. The sprocket diameter has been enlarged, and the sprockets themselves are designed to be stronger.

Diagram showing updated shaft dimensions for Kunray KR5V V2 motor, comparing before and after upgrade with measurements.

Figure 4.1: Updated shaft dimensions for the KR5V V2 motor, showing changes in shaft size and sprocket diameter.

Close-up of the upgraded motor shaft and sprocket, highlighting increased axis size and stronger sprocket.

Figure 4.2: Visual representation of the upgraded shaft, indicating a larger axis and stronger sprocket.

Comparison of KR5V motor covers, showing 'Now' (upgraded) vs 'Before' (older version) with reinforced features.

Figure 4.3: Comparison of motor covers, illustrating the upgraded reinforced front and rear covers for extra durability and stability.

Technical drawing of Kunray KR5V motor with main parameters and detailed dimensions.

Figure 4.4: Detailed technical drawing of the Kunray KR5V motor, including main parameters and dimensional specifications.

5. Setup and Installation

Proper installation is crucial for the performance and longevity of your Kunray KR5V V2 motor. Follow these steps carefully.

5.1 Motor Mounting

Mount the motor securely to your electric motorcycle or go-kart frame. Ensure there is adequate clearance for the motor and chain/belt drive system. The motor is designed for air cooling, so ensure proper airflow around its finned housing.

Kunray KR5V V2 motor installed on a dirt bike frame, showing the motor's position relative to the rear wheel and chain.

Figure 5.1: Example of the Kunray KR5V V2 motor installed on a dirt bike frame.

5.2 Sprocket Installation

Select the appropriate sprocket for your application (#35-9T, #35-11T, or 420-10T). Install the sprocket onto the motor shaft and secure it with the provided nut. Ensure the chain is properly aligned and tensioned.

Kunray KR5V V2 motor with three available sprocket options: #35-9T, #35-11T, and 420-10T.

Figure 5.2: Available sprocket options for the KR5V V2 motor.

5.3 Electrical Connections

Connect the motor to your controller and other accessories. The motor includes a Hall sensor for precise control. Ensure all connections are firm and insulated.

Wiring Configuration for Counterclockwise Rotation (Left Side Installation):

If the motor is installed on the left side of the vehicle and requires counterclockwise rotation, use the following wiring configuration:

  • Phase Wires:
    • Motor Yellow to Controller Yellow
    • Motor Blue to Controller Green
    • Motor Green to Controller Blue
  • Hall Sensor Wires:
    • Motor Red to Controller Red
    • Motor Black to Controller Black
    • Motor Green to Controller Green
    • Motor Yellow to Controller Blue
    • Motor Blue to Controller Yellow

Refer to the installation video for a visual guide on mounting the motor and connecting the chain:

Video 5.1: Installation and testing of the Kunray KR5V motor on a dirt bike.

6. Operation

Once the motor is correctly installed and connected to a compatible controller and power source, you can begin operation. Ensure all safety checks are performed before starting the vehicle.

  • Turn on the vehicle's main power switch.
  • Engage the throttle gradually to accelerate.
  • Monitor the vehicle's performance and listen for any unusual noises.
  • Always operate the vehicle within its design limits and your skill level.

7. Maintenance

Regular maintenance will help ensure the longevity and optimal performance of your motor.

  • Cleaning: Keep the motor's exterior clean, especially the cooling fins, to ensure efficient air cooling.
  • Connections: Periodically check all electrical connections for tightness and signs of wear or corrosion.
  • Sprocket and Chain: Inspect the sprocket and chain for wear, damage, and proper tension. Lubricate the chain as needed.
  • Temperature Monitoring: While the motor is air-cooled, avoid prolonged operation under extreme loads or high ambient temperatures to prevent overheating.
Close-up of the motor's finned housing, emphasizing air cooling for temperature regulation.

Figure 7.1: The motor's finned design facilitates air cooling to prevent rapid temperature rise and protect motor life.

8. Troubleshooting

This section addresses common issues you might encounter with your motor.

  • Motor Not Starting:
    • Check all electrical connections, including battery, controller, and motor phase/Hall sensor wires.
    • Ensure the battery is charged and provides the correct voltage (72V).
    • Verify the throttle is functioning correctly.
  • Motor Running Erratically or with Reduced Power:
    • Inspect Hall sensor connections for damage or incorrect wiring.
    • Check for loose phase wire connections.
    • Ensure the controller is compatible and functioning correctly.
  • Overheating:
    • Ensure adequate airflow around the motor's cooling fins.
    • Avoid prolonged high-load operation.
    • Check for any obstructions preventing proper cooling.

9. User Tips

  • Battery Compatibility: If you are using an existing battery, always ensure that its voltage matches the motor's rated voltage (72V) to prevent damage to both components.
  • Accessory Replacement: Many accessories in the kit can be replaced or customized. If you need to change parts like the throttle type (e.g., from thumb to twist throttle), inform customer service before placing your order.
  • Manufacturer Codes: The motor case includes manufacturer codes, which are beneficial for after-sales service and support.
  • Bluetooth Integration: The V2 motor features built-in Bluetooth for enhanced connectivity and potential future features.

10. Warranty and Support

The Kunray KR5V V2 motor comes with a one-year warranty period. Accessories included with the motor have a three-month warranty for quality problems, allowing for free replacement.

For any questions or support, please contact the seller directly. Provide your purchase details and any relevant information to facilitate assistance.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.