1. Introduction
The ToolkitRC M7 is a versatile multi-functional tool designed for RC enthusiasts, integrating a balanced charger and discharger, an electric display, a signal measuring device, and a signal source. It is capable of handling various battery types and offers comprehensive diagnostic and control features. The ADP100 is a compact AC to DC power supply unit, an ideal companion for your ToolkitRC M series DC charger, providing reliable power in a portable form factor.
2. Safety Information
- Always ensure correct polarity when connecting batteries to avoid damage to the charger or battery.
- Do not leave charging batteries unattended.
- Use the charger in a well-ventilated area, away from flammable materials.
- Ensure the power supply voltage matches the charger's input requirements.
- Keep the device away from moisture, dust, and extreme temperatures.
- Do not attempt to disassemble or modify the charger or power supply.
- Always disconnect power when not in use or before cleaning.
3. Package Contents
- ToolkitRC M7 Multi-Charger
- ToolkitRC ADP100 AC to DC Adapter (if purchased as a bundle)
- Power Cable (US or EU plug, depending on selection)
- Quick Manual
Note: Contents may vary slightly based on the specific product bundle purchased.
Figure 3.1: ToolkitRC M7 Multi-Charger and ADP100 Power Supply with US plug cable.
Figure 3.2: ADP100 AC to DC adapter with US and EU plug options.
4. Product Overview
4.1 M7 Multi-Charger Layout
Figure 4.1: Front view of the M7 Multi-Charger, highlighting the Display, Scroll Wheel (for navigation and selection), Exit button, Output port, and Balance port.
Figure 4.2: Back view of the M7 Multi-Charger, highlighting the Input port, Signal port, Cooling fan, and USB Output & upgrade port.
4.2 ADP100 Power Supply Overview
The ADP100 is a compact AC to DC adapter designed to provide stable power to your M7 charger. It features a safe case design, over current protection, and is highly portable.
Figure 4.3: Top view of the ADP100 Power Supply.
5. Setup Instructions
- Connect Power Supply (ADP100):
- Connect the appropriate AC power cable (US or EU plug) to the ADP100 power supply.
- Plug the AC power cable into a wall outlet.
- Connect the XT60 output cable from the ADP100 to the input port (DC 7-28V) on the M7 Multi-Charger.
- Power On M7 Multi-Charger: Once connected, the M7 charger should power on automatically, displaying the ToolkitRC logo and then the main interface.
- Connect Battery:
- For charging, connect your battery's main power lead to the Output port (XT60) on the M7.
- For balance charging, also connect the battery's balance lead to the Balance port (1-6S) on the M7.
Video 5.1: Product unboxing and basic connection demonstration of the M7 charger.
6. Operating Instructions
The M7 features an IPS wide-angle display and a scroll wheel for intuitive navigation and control.
Figure 6.1: M7 charger displaying real-time charging status.
6.1 Navigation
- Scroll Wheel: Turn left or right to navigate through menu options or adjust values.
- Press Scroll Wheel: Press the scroll wheel to confirm a selection or enter a menu.
- EXIT-F Button: Press to go back to the previous menu or exit a function.
6.2 Main Functions
The M7 integrates several functions accessible via the main menu:
Figure 6.2: M7 main menu showing various functions.
- Balance Charge/Discharge: Select this option to charge or discharge various battery types (LiPo, LiHV, LiFe, Lion, NiMh, Pb) with balancing capabilities. Adjust parameters like battery type, cell count, charge/discharge current, and end voltage.
- Electricity Measurer: Use this function to measure battery voltage (1.0-5.0V @1-6S) and internal resistance (1-99mR @1-6S).
- Signal Source: Generate PWM, PPM, and SBUS signals for testing.
- Signal Testing: Test incoming PWM, PPM, and SBUS signals.
- ESC Test: Test Electronic Speed Controllers (ESCs) with PWM output (200W@10A).
- Power: Access power-related settings and information.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquids or abrasive cleaners.
- Storage: Store the charger and power supply in a cool, dry place when not in use.
- Firmware Updates: Periodically check the ToolkitRC website for firmware updates to ensure optimal performance and access to new features. Updates can typically be performed via the USB port.
8. Troubleshooting
- Device not powering on:
- Check all power connections to the ADP100 and M7.
- Ensure the AC power cable is securely plugged into a working outlet.
- Verify the input voltage to the M7 is within the 7.0-28.0V range.
- Charging not starting/error message:
- Check battery connections for correct polarity and secure fit.
- Ensure the correct battery type and cell count are selected in the charger settings.
- Verify the battery is not over-discharged or damaged.
- Check balance lead connection if balance charging.
- Inaccurate readings:
- Ensure all connections are clean and secure.
- Calibrate the device if a calibration option is available in the settings (refer to the detailed manual if needed).
9. Specifications
9.1 M7 Multi-Charger Specifications
| Category | Parameter | Value |
|---|---|---|
| Charger | Input voltage | 7-28V@MAX12A |
| Type of battery | LiPo LiHv LiFe Lion@1-6S, NiMh @1-16S Pb @1-10S | |
| Balance current | 400mA @2-6S | |
| Charging power | 0.1-10A@200W | |
| Discharge power | 0.1-10A@200W Recyling mode, 0.1-3A@10W Normal mode | |
| USB | 2.1A@5.0V | |
| Product size | 73*51*27 mm | |
| Product weight | 90g | |
| LCD | IPS 2.0inch LCD 320*240 Pixel | |
| Material | Metal | |
| Measurer | PWM | 880us-2200us@20-400Hz |
| PPM | 880us-2200us*8CH@20-50Hz | |
| SBUS | 880us-2200us*16CH@20-100Hz | |
| Voltage | 1.0V-5.0V@1-6S | |
| Internal resistance | 1-99mR@1-6S | |
| Output | PWM | 500us-2500us@20-1000Hz |
| PPM | 880us-2200us*8CH@50Hz | |
| SBUS | 880us-2200us*16CH@74Hz | |
| Power supply | 1.0-28.0V@1.0-10A mode: CC+CV |
Figure 9.1: Detailed technical specifications for the M7 Multi-Charger.
9.2 ADP100 Power Supply Specifications
| Parameter | Value |
|---|---|
| Model | ADP100 |
| Input AC | 100-240V 50-60Hz 1.5A |
| Power | 100W |
| Output DC | 20V 5A XT60 |
| Features | Safe case design, Over Current Protection, Compact and portable |
10. User Tips
- For optimal performance and longevity, ensure the charger's cooling fan is not obstructed during operation.
- Always double-check your battery type and cell count settings before initiating a charge cycle to prevent damage.
- The compact size of both the M7 and ADP100 makes them excellent for field use; consider a protective case for transport.
11. Warranty and Support
ToolkitRC products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official ToolkitRC website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.