Product Overview
The AIRROBO PC10 is a state-of-the-art cordless robotic pool cleaner designed to provide efficient and thorough cleaning for both inground and above-ground pools. Featuring powerful suction, a triple motor system, and intelligent navigation, it effectively removes debris from pool floors, walls, and waterlines. Its user-friendly design includes multiple cleaning modes, a long-lasting battery, and an easy-to-clean filter basket, ensuring a crystal-clear pool with minimal effort.
Image: The AIRROBO PC10 Cordless Robotic Pool Cleaner.
Video: Demonstration of the AIRROBO PC10 Robotic Pool Cleaner in action, highlighting its features and ease of use.
Package Contents
Please check the package for the following items:
- AIRROBO PC10 Robotic Pool Cleaner
- Power Cord
- Full Instructions (this manual)
- Fittings (if applicable, e.g., retrieval hook)
Specifications
| Feature | Specification |
|---|---|
| Brand Name | AiRROBO |
| Model | PC10 |
| Type | Robotic Pool Cleaner |
| Power Source | Rechargeable Battery |
| Suitable For | Above Ground Pools, Inground Pools |
| Water Type | All Water Types |
| Voltage | 220-240V |
| Features | Corrosion Resistant, Portable, Cordless, Wall Cleaning, Automatic Cleaning |
| Installation Area | Pool Floor & Pool Walls |
| Runtime | 120 minutes |
| Item Height | 18.7 inches |
| Item Width | 15.6 inches |
| Item Weight | 9 kg |
| Max Pool Coverage | 1830 sq ft (170 sqm) |
| Max Pool Depth | Up to 98 Feet (2.5m) |
| Water Flow Rate | 150 LPM |
| Charging Time | 2.5 hours (Quick Charge) |
| Filter Basket Capacity | 4 Liters |
| Waterproof Grade | IP68 |
| Safe Operation Temperature | 5°C ~ 35°C |
Setup
- Unpack the Cleaner: Carefully remove all components from the packaging. Ensure all parts listed in the package contents are present.
- Initial Charge: Before first use, fully charge the robotic pool cleaner.
- Locate the charging port on the cleaner.
- Open the protective cover and securely plug in the power cord.
- Connect the power adapter to a suitable power outlet (220-240V).
- The charging indicator light will show the charging status. A full charge takes approximately 2.5 hours.
Image: The robotic pool cleaner connected to its charger, indicating a wired charge process.
- Prepare the Pool: Ensure the pool is free of large debris that could obstruct the cleaner.
Operating Instructions
- Select Cleaning Mode: On the top of the cleaner, locate the mode selection switch. Choose one of the following modes:
- A (Auto): Cleans walls first, then the floor.
- F (Floor): Focuses cleaning on the pool floor.
- W (Wall): Focuses cleaning on the pool walls and waterline.
Image: Diagram illustrating "N" path cleaning for walls and "Z" path cleaning for the pool floor, demonstrating intelligent path planning.
Image: Visual representation of the cleaner's ability to clean the waterline, floor, and walls of the pool.
- Place in Pool: Gently lower the cleaner into the pool. It will sink to the bottom. Ensure it is fully submerged before it begins operation.
- Start Cleaning: The cleaner will automatically begin its cycle based on the selected mode.
- Automatic Parking: When the battery is low (below 5%) or the cleaning cycle is complete, the cleaner will automatically move to the edge of the pool for easy retrieval.
Image: Diagram showing the cleaner's automatic parking behavior at the pool edge when battery is low or cleaning is complete.
- Retrieval: Use a standard pool hook (not included) to gently pull the cleaner to the surface and out of the water.
Image: A person using a pool hook to retrieve the robotic pool cleaner from the water.
Maintenance
- Clean the Filter Basket: After each cleaning cycle, or when the filter basket is full, it should be cleaned.
- Open the top cover of the cleaner.
- Remove the 4L large filter basket.
- Empty any collected debris and rinse the basket thoroughly with a garden hose.
- Ensure the filter is clean before reinserting it into the cleaner.
Image: The 4L large filter basket filled with leaves and debris after a cleaning cycle.
Image: A person rinsing the filter basket with a garden hose to remove collected debris.
- Store the Cleaner: When not in use, store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures.
- Regular Inspection: Periodically check the scrubbing brushes and tracks for wear and tear. Replace if necessary to maintain optimal cleaning performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not start | Low battery; Power switch off; Obstruction | Charge the cleaner fully; Ensure power switch is ON; Check for and remove any obstructions. |
| Poor cleaning performance | Full filter basket; Worn brushes; Incorrect cleaning mode | Clean the filter basket; Inspect and replace brushes if worn; Select appropriate cleaning mode (Auto, Floor, or Wall). |
| Cleaner gets stuck | Large debris; Uneven pool surface; Obstacle too high | Remove large debris from pool; Ensure pool surface is suitable (climbing slope less than 20 degrees, obstacle height less than 3cm); Manually reposition cleaner. |
| Cleaner does not climb walls | Low battery; Wall mode not selected; Slippery wall surface | Charge the cleaner fully; Select 'W' (Wall) or 'A' (Auto) mode; Ensure pool walls are not excessively slippery. |
| Indicator light shows "Alert" (Red) | System error or malfunction | Turn off the cleaner, remove from water, wait a few minutes, then restart. If the issue persists, contact customer support. |
Image: Status indicator lights: Green (Work), Yellow (Low Power), Blue (Charging), Red (Alert).
User Tips
- For optimal cleaning, run the cleaner regularly, especially after heavy winds or storms.
- Always ensure the filter basket is clean before starting a new cleaning cycle to maximize suction power.
- If your pool has particularly stubborn stains on the walls, consider running the 'Wall' cleaning mode multiple times.
- Store the cleaner indoors during off-season or when not in use for extended periods to prolong its lifespan.
- Periodically check the pool water chemistry to ensure it is balanced, as this can affect the cleaner's performance and longevity.
Warranty and Support
The AIRROBO PC10 Cordless Robotic Pool Cleaner comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official AIRROBO website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact AIRROBO customer service through their official channels. Keep your purchase receipt and product serial number handy when contacting support.
