1. Introduction
The SUNSHINE SS-890B Mini Laser Separator is a precision electronic repair tool designed for efficient disassembling and repairing of various electronic products. It specializes in removing back glass, screen brackets, and performing custom laser engraving on items like mobile phone back covers and text logos. Its compact design, automatic positioning, and high-definition touchscreen make it an essential tool for professional and hobbyist repair technicians.

2. Safety Information and Precautions
- Laser Safety: Always close the protective cover during operation to prevent laser eye injury. The machine features a visual light filtering work chamber for eye protection.
- This product is not suitable for children under 3 years old.
- Do not swallow small parts to prevent choking.
- Avoid contact with eyes. If contact occurs, rinse immediately with plenty of water and seek medical attention.
- Handle the machine and its components with care to avoid collisions or damage.
- Keep the device away from high temperatures and humid environments.
- Do not soak or wash the device.
- Keep out of reach of children.

3. Setup Guide
- Unpacking and Inspection: After unpacking, check all components for completeness and any signs of damage.
- Install the Laser Head: Carefully insert the laser head into its designated slot on the machine and secure it. Connect the laser head's power cable.
- Insert SD Card: Locate the SD card slot on the side of the machine and insert the provided SD card. All laser files are stored here.
- Connect Power: Connect the power cable to the machine and a suitable power outlet. Turn on the main power switch.
- Smoke Purifier (Recommended): For optimal operation and safety, it is recommended to use the SS-6604/6605 smoke purifier (purchased separately). Connect the smoke purifier's hose to the exhaust port at the rear of the laser machine.

4. Operating Instructions
4.1. Back Glass Removal (e.g., Mobile Phone)
- Place Device: Place the mobile phone with the back cover facing up onto the work platform. The machine features an automatic centering fixture to secure the phone precisely.
- Focusing: Perform the focusing operation to ensure the laser is correctly aligned with the device surface.
- Select File: On the HD touchscreen, navigate to "File" and select the corresponding phone drawing file (e.g., "13(White).nc" for an iPhone 13 with white back).
- Preview: Click "Preview" to check the laser range. The machine will preview both sides of the phone for about 30 seconds.
- Start Engraving: Close the protective cover to prevent eye injury. Click "Start" to begin the laser engraving process. You can adjust the laser speed using the "Speed -" and "Speed +" buttons.
- Completion: Wait for the laser process to finish. Once completed, open the cover and remove the phone.


4.2. Screen Bracket Removal
- Place Screen Bracket: Place the screen bracket onto the work platform, ensuring it is securely positioned.
- Focusing: Adjust the laser focus as needed for the screen bracket material.
- Select File: On the touchscreen, select the appropriate file for screen bracket removal (e.g., from the "Screen" folder).
- Preview and Start: Preview the laser range and then close the protective cover. Start the laser engraving process.
- Completion: Wait for the process to complete, then remove the screen bracket.

4.3. Custom Laser Engraving (Text/Logo)
- Connect to Computer: Connect the laser machine to a computer using a USB cable.
- Install Software: Download and install the computer software from the official website: www.exinxun.com.
- Connect Device: In the software, select the wired or wireless connection method and connect to the SS-890B Mini.
- Design/Select: Use the software to design custom text or select pre-loaded images for engraving. Adjust size, position, and other parameters.
- Place Material: Place the material to be engraved (e.g., metal card) onto the work platform.
- Focusing: Perform the focusing operation.
- Preview and Carve: Use the "Start Preview" function in the software to check the laser path. Close the protective cover and then click "Start Carving" to begin.
- Completion: Once engraving is complete, remove the material.

5. Specifications
| Attribute | Value |
|---|---|
| Brand | SUNSHINE |
| Product Name | Laser Machine |
| Model | SS-890B Mini |
| Working Range | 174*87mm |
| Product Size | 390*250*200mm |
| Packing Size | 450*310*270mm |
| Net Weight | ≈ 7.39kg |
| Gross Weight | ≈ 9.2kg |
| Input Voltage | 110~230V |
| Cooling Method | Air Cooling |
| Lifespan | > 8000h |
| Operation Method | Built-in Computer |
| Positioning Method | Automatic Positioning |
| Laser Power | 5W |

6. User Tips
- When removing back glass, ensure the phone is securely positioned using the automatic centering fixture for precise laser operation.
- For screen bracket removal, some users have inquired about removing the "OCA" (Optically Clear Adhesive) from the LCD. While the machine can remove screen brackets, specific instructions for OCA removal should be followed carefully to avoid damaging the LCD.
- Utilize the computer software for custom engravings to achieve desired text and logo designs with adjustable parameters.
7. Warranty and Support
7.1. After-Sales Service
- This product can be returned or exchanged within 7 days of purchase for quality issues.
- 3-Month Warranty Coverage: Covers quality issues caused by non-human factors or product usage period. This typically includes manufacturing defects.
- Disclaimer: Damage to the machine caused by improper use (such as violent disassembly, high-temperature exposure, or water corrosion) is not covered by the warranty.
7.2. Customer Support
If you encounter any problems or require technical assistance, please contact the technician or customer service via:
- Whatsapp: +8618676065720